Slt Drw Quad Pwr Opts Cruise Cd 5.9l Cummins Diesel 6 Speed Manual Dually 4x4 on 2040-cars

Auto blog

Mustang, Camaro, Challenger gallop onto USPS pony car postage stamp set

Some of America's most iconic cars are about to be immortalized on postage stamps. A new set by the U.S. Postal Service will celebrate the the golden era of pony cars, featuring five classic examples of Detroit iron. Each one is beautifully illustrated in oil-on-canvas style, with subjects in motion and sunlight glinting off the chrome, and would add a nice touch to any first-class letter. The pony car segment was all about (relatively) small, sporty alternatives to the full-size land yachts of the 1960s. They typically came equipped with 6-cylinder engines or small-block V8s. The category was named after the Ford Mustang, hence  the name. Some, though, argue that the Plymouth Barracuda, which was launched a couple of weeks before the Mustang, is the first. Luckily, the Falcon-based Mustang's distinct styling generated a sales sensation, or we might be calling them fish cars. Appropriately, one of the featured cars is a Mustang. But it's not just any Mustang. The 1969 Boss 302, seen here resplendent in Bright Yellow, was created for the hotly-contested SCCA Trans-Am racing series. One of its main rivals would have been the 1969 Chevy Camaro Z/28, also created specifically for the series, and is included in the set in Fathom Green. Representing Auburn Hills in the set is a 1970 Dodge Challenger R/T in Plum Crazy, while Southfield's American Motors gets a nod with an AMC Javelin in Big Bad Orange. The Mustang's platform cousin, a 1967 Mercury Cougar XR-7, is portrayed in a gorgeous Burgundy Poly that almost looks incomplete without Neko Case on the hood. It's not the first time the USPS has honored America's rich car culture on its stamps. In 2013, it issues a series of muscle car stamps with the help of Richard Petty. That set featured a 1966 Pontiac GTO, 1967 Shelby GT-500, 1970 Chevelle SS, 1970 Plymouth Hemi ’Cuda and, of course, a 1969 Dodge Charger Daytona. Another set in 2016 featured classic pickup trucks. Going further back, a 2008 release had chroed and finned automobiles of the 1950s and a 2005 release featured sporty American cars of the same era. The pony car stamps will debut on August 25 at the Great American Stamp Show in Sacramento, California in partnership with the American Philatelic Society. The public is free to attend the dedication ceremony, but you must RSVP first. After that, they will be available at local post offices and on line at the USPS store.

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat

Brand new cars are being sold with defective Takata airbags

If you just bought a 2016 Audi TT, 2017 Audi R8, 2016–17 Mitsubishi i-MiEV, or 2016 Volkswagen CC, we have some unsettling news for you. A report provided to a US Senate committee that oversees the US National Highway Traffic Safety Administration (NHTSA) and reported on by Automotive News claims these vehicles were sold with defective Takata airbags. And it gets worse. Toyota and FCA are called out in the report for continuing to build vehicles that will need to be recalled down the line for the same issue. That's not all. The report also states that of the airbags that have been replaced already in the Takata recall campaign, 2.1 million will need to eventually be replaced again. They don't have the drying agent that prevents the degradation of the ammonium nitrate, which can lead to explosions that can destroy the airbag housing and propel metal fragments at occupants. So these airbags are out there already. We're not done yet. There's also a stockpile of about 580,000 airbags waiting to be installed in cars coming in to have their defective airbags replaced. These 580k airbags also don't have the drying agent. They'll need to be replaced down the road, too. A new vehicle with a defective Takata airbag should be safe to drive, but that margin of safety decreases with time. If all this has you spinning around in a frustrated, agitated mess, there's a silver lining that is better than it sounds. So take a breath, run your fingers through your hair, and read on. Our best evidence right now demonstrates that defective Takata airbags – those without the drying agent that prevents humidity from degrading the ammonium nitrate propellant – aren't dangerous yet. It takes a long period of time combined with high humidity for them to reach the point where they can rupture their housing and cause serious injury. It's a matter of years, not days. So a new vehicle with a defective Takata airbag should be safe to drive, but that margin of safety decreases with time – and six years seems to be about as early as the degradation happens in the worst possible scenario. All this is small comfort for the millions of people who just realized their brand-new car has a time bomb installed in the wheel or dashboard, or the owners who waited patiently to have their airbags replaced only to discover that the new airbag is probably defective in the same way (although newer and safer!) as the old one.