Dodge Ram Mega Cab Dually 4x4 Cummins Diesel Custom Lift Wheels Tires Tow on 2040-cars

Auto blog

500+ hp Stellantis 'Hurricane' I6 previews a world without Hemis

After years of rumored development, Stellantis has revealed its new six-cylinder engine family. The 3.0-liter, twin-turbocharged "Hurricane" I6 will offer V8 power, forced induction torque and six-cylinder efficiency in a package designed to fit into any of the company's North American rear-wheel-drive platforms.  What is "V8 power," exactly? Well, in standard output guise, the new I6 cranks out more than 400 horsepower (the specific figure will vary by application) and 450 pound-feet of torque, while the high-output variant is good for more than 500 horses and 475 lb-ft. The final figures will be dependent on the application. We'll save you a little legwork: In current Ram, Jeep and Dodge products, the 5.7-liter Hemi tops out at about 395 hp and 410 lb-ft, give or take, and the 6.4-liter around 485 hp and 475 lb-ft.    This is a clean-sheet design that is only related to the company's turbocharged four-cylinder by some common measurements. The I6 is exclusively direct-injection (no hybrid/port-injection here) and the two I6 variants share 96 common parts, including the block and oil pan design. The differences are found in their internals, intake plumbing, valvetrain components and the turbochargers themselves. Stellantis is not yet ready to share specs or supplier info for the turbos but says announcements will come from its partners soon.  The standard-output I6 has a compression ratio of 10.4:1 and revs to 5,800 rpm. It will run on regular fuel, albeit with reduced performance; 91 octane is recommended for maximum output. The high-output variant has a compression ratio of 9.4:1 and will rev to 6,100 rpm. That one will require premium. The new I6's advantages go beyond basic power output. Every Hemi family engine currently in production is based on an iron block design, so they're heavy. The aluminum-block I6 shaves weight off the total engine package, even if some of that gets added back thanks to the turbos and their associated plumbing. The standard-output I6 weighs 430 pounds, Stellantis engineers told us; the high-output adds just another 11. Fully dressed 5.7-liter V8s are in the 550-560-pound ballpark, and 6.4-liters close in on 600 pounds.  You may be wondering, "Why a clean-sheet gasoline engine now, when the industry is moving toward battery-electrics?" A valid inquiry, and one Stellantis was prepared to address. While the company will be pivoting to electrification over the next decade, it won't be instantaneous.

2020 Dodge Challenger Drag Pak comes solely with supercharged power

The Dodge Challenger Drag Pak has returned for 2020, five years after the last one arrived, and two years after it began development. And while in many ways it looks like past Drag Paks, there are a number of tweaks that should make this the fastest and most capable factory drag car yet from Mopar. Unlike the last model, only a supercharged 354-cubic-inch (5.8-liter for the imperically challenged) V8 is available. Mopar says it's more powerful than its predecessor, though exact horsepower wasn't given. It did confirm that the previous car was capable of a stunning 1,200 horsepower. The engine is coupled solely to a three-speed automatic transmission with a manual shifter. 2020 Dodge Challenger Drag Pak View 17 Photos Supporting the massive engine are many chassis, suspension and driveline enhancements. The independent rear suspension and axles are gone in favor of a solid axle from Strange and a four-link suspension. The front remains stock except for double-adjustable Bilstein shocks. The engine is mounted to a subframe member that's beneficial both to weight distribution and center of gravity. The car gets high-performance brakes and custom Weld Racing wheels with "DRAGPAK" engraved on them. The interior features a welded-in roll cage certified for quarter-mile times as quick as 7.5 seconds. Helping keep the car planted without increasing drag too much are front and rear spoilers from the road-going Challenger, a new addition compared with the previous car. Every Drag Pak car also comes standard with a wheelie bar and parachute. Dodge will only build 50 of these cars, and they'll only be offered as race cars that aren't legal for the street. The cars will be eligible for competing in sportsman classes in NHRA and NMCA drag racing series. Pricing and availability hasn't been set yet, but will be revealed sometime next year.

Ringbrothers 1969 Dodge Charger Defector is a mean green machine

The 1969 Dodge Charger is one of the most recognizable cars ever built. Its debut at the peak of the muscle car era, sleek bodywork, and roaring Hemi V8 represented everything that was wonderful about American cars from the 1960s. It was fast, loud and moved like a greyhound off the line in search of that mechanical lure. Ringbrothers, the shop behind cars like the De Tomaso Pantera "ADRNLN" and t he Chevy Chevelle "Recoil," have unveiled its latest project - the 1969 Dodge Charger "Defector". Like most Ringbrothers projects, a first glance doesn't show much more than some wheels, new paint and a different ride height. Like any good custom car, the devil is in the details. The Defector falls into the restomod category, meaning it has classic looks but has been updated with modern parts and technology. This is the first time the shop has done a Mopar product, and they wanted to knock it out with the first attempt. While it may look stock, the bodywork has been significantly altered. Compared to a standard '69 Charger, the trunk lid is two inches shorter and the wheelbase has been increased by three inches. That means the car has new rockers and new quarter panels. The car was then painted in a BASF color called "Greener On The Other Side." It wears a black vinyl roof and a black stripe around the rear. The stripe and grille both sport the Ring Brothers logo. The car rides on 19-inch HRE wheels and uses Baer brakes with six-piston front calipers. The new rear subframe comes from Detroit Speed. The ancient steering rack has been replaced with a new rack and pinion unit. We assume this means it won't steer like a drunken hippo in a mudslide. Like the exterior, changes to the interior are subtle. It looks stock, but the seats wear new upholstery and the dash has been fitted with an Alpine stereo with a touchscreen display. The new steering rack is fitted with a nice Nardi steering wheel. The most modern update rests under the hood. In place of the old V8, Ringbrothers have swapped in a new 6.4-liter Hemi V8. It's the same one you'll find in any number of modern Mopar products. It's been tuned by Wegner Motorsports and exhales through a new Flowmaster exhaust system. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.