3500 Drw 4x4 Laramie Diesel Automatic Leather Nav Dvd Linex Tow Nerf Bars on 2040-cars

Auto blog

Towing with the 2016 Ram lineup [w/video]

I do not tow things. Ever. Yet I recently found myself at the Fiat Chrysler Automobiles proving grounds in Chelsea, MI, where I'd be testing the hauling capabilities of Ram's current product range. This experience was not only a perfect education for a towing novice like me, but allowed me to tow far more weight than I'd ever consider hauling the real world, and all within the safe confines of the Chelsea Proving Grounds. There was an extremely diverse array of vehicles at my disposal, including Ram's gasoline- and diesel-powered offerings with trucks ranging from the 1500 on up through the 5500 Chassis Cab, as well ProMaster vans. Beyond that, FCA brought out a number of vintage Dodge pickups for me to play with, while also working with Case IH to provide a track-loader I could test. I put together a range of videos covering everything from the classics to the production trucks to the construction equipment. And despite some technical difficulties – you'll notice a distinct lack of in-car videos, with blame going to a corrupted micro SD card – I've assembled ten videos that give an up-close look at Ram's offerings. 2015 Ram ProMaster City Let's start small. The ProMaster City only has a towing capacity of 2,000 pounds. That's a reasonably impressive figure for a van that uses the same powertrain as a Chrysler 200. The 2.4-liter four-cylinder and nine-speed automatic weren't really bothered with the extra weight added by the trailer. Even when accelerating at freeway speeds, the ProMaster City didn't feel out of breath or hampered by its load. That said, the rear of the van was unloaded, which probably wouldn't be the case for most consumers. It's unclear how the City would feel if its driver were taking advantage of the max payload (1,883 pounds) and towing. 2015 Ram ProMaster 1500 To be polite, the Ram ProMaster is a difficult vehicle to like. Its awkward seating position is bus-like and lacks the visibility enjoyed by the Ford Transit or the utter driving comfort of the Mercedes-Benz Sprinter. Its 3.0-liter, four-cylinder turbodiesel engine, meanwhile, is something of an anomaly. While it's potent for a four-cylinder diesel, producing 295 pound-feet of torque and 174 horsepower, those numbers don't feel all that impressive when loaded down. The model I tested was barely using half of its 5,100-pound maximum towing weight and was loaded down with just 500 of its 3,620-pound payload. Yet it lacked the pluckiness of the smaller City.

Junkyard Gem: 1991 Dodge Monaco LE

When Chrysler took over the American Motors Corporation in 1987, the hot-selling Jeep brand was the big prize of that deal. At a stroke, Iacocca's company got the XJ Cherokee (which remained in production into our current century) plus its Comanche pickup sibling, the Wrangler, the Grand Wagoneer, and the AMC Eagle as bonuses. The Eagle gave its name to Chrysler's new marque, which worked out well for quite a few years, and of course the PowerTech V8 engine began life as an AMC design. Yes, Chrysler made out like a bandit on the AMC purchase, but one of the most important acquisitions that came with that coup ended up being a Renault design from the last gasp of Kenosha: the Eagle Premier. Genetic material from this car made its way into Chrysler products for decades to come, and the Dodge Division got the opportunity to slap Monaco badges on the Premier for the 1990 through 1992 model years. Here's one of those super-rare cars in a Denver self-service yard. Dodge sold plenty of Detroit-designed Monacos from the 1965 through 1978 model years, and so the name seemed ripe for a revival in 1990. We rated the 1974 Dodge Monaco "Bluesmobile" #3 on the Best Movie Cars of All Time list, and Monacos may be found in countless cop movies and TV shows over the decades. Did the name belong on a Renault design? Absolutely! The radical-looking and big-selling Chrysler LH cars were built on a modified Eagle Premier chassis, enabling Chrysler to print money from a 1980s Renault design all the way through 2004. After that, Mercedes-Benz engineering (with a dash of Mitsubishi thrown in for good measure) got stirred into the mix, but I'm told by a Chrysler engineer that you can still see the Renault 25 structure beneath the dashboard in modern Challengers and Chargers. All of this comes thanks to Lee Iacocca's score of that advanced European car way back in 1987. One thing from the Premier that Chrysler dropped like a monkey dropping a red-hot penny once production of the Premier/Monaco ended: the PRV V6, a sophisticated-but-flaky overhead-cam V6 originally developed by a partnership between Peugeot, Renault, and Volvo (hence the acronym). This engine achieved its greatest fame as the powerplant that went into the DeLorean DMC-12. You could get the chugging AMC 2.5-liter straight-four in the Eagle Premier, but all the 1990-1992 Monacos got the 3.0-liter PRV, rated at 150 horsepower.

2018 Dodge Challenger SRT Hellcat Widebody First Drive | Same snarl, more bite

By now, you've read a lot about the Dodge Demon, including our driving impressions from the drag strip. You've also heard a lot about the Challenger Hellcat, which we've had the pleasure of driving at Portland International Raceway, Willow Springs, and on our home turf of Woodward Avenue, both during the Dream Cruise and for an episode of AutoblogVR. Last week, Dodge and SRT invited us out to Indianapolis to sample the Demon, as well as the Durango SRT. Sandwiched between those two launches, however, was another distillation of Dodge's retro-cool coupe, the 2018 Challenger SRT Hellcat Widebody. The Widebody shares most of the guts of the standard Charger Hellcat, but went to the same cosmetic surgeon as the Demon. The Hellcat 6.2-Liter V8 with 2.4-liter-per-rev supercharger, producing 707 horsepower and 650 pound-feet of torque, is unchanged. It comes standard with a six-speed manual transmission, but our tester had the optional eight-speed automatic with steering wheel-mounted paddle shifters. It's 3.5 inches wider (look at those fenders!) than the standard Hellcat, though, which allows it to accommodate 20-by-11-inch "Devil's Rim" wheels. It shares its front splitter with the Demon, but retains the Hellcat's rear spoiler. The Widebody also features an electronic power steering system with selectable drive modes. It just slightly outperforms the standard Hellcat, as well, with better cornering grip, improved acceleration, and better braking (even though it shares the same Brembo brake package as the standard Hellcat). Dodge claims that the Widebody does the quarter-mile 0.3 seconds quicker, dropping it just out of the 11s to 10.9 seconds. 0-60 miles per hour drops from 3.5 to 3.4 seconds. Lateral grip increases by 0.04 G to 0.97 G on the skid pad. On the company's 1.7-mile road course, Dodge says the Widebody drops two seconds off its lap time compared to the standard Hellcat, finishing about 13 car lengths ahead. We spent our time with the Hellcat Widebody on the infield road course at Indianapolis Motor Speedway. Sliding into the car, the seating position is cozy and comfortable even with a helmet on, and we have no trouble adjusting our chair and steering column to ideal placement. The infotainment display shows us our drive settings for the next few miles: the transmission and suspension are in Track Mode, steering is set to Sport, with traction set to Street. We fire up the car with an instructor in the right seat, and head out of the pit lane.