2012 Dodge Ram 3500hd Reg Cab 4x4 Diesel Dually Tow 47k Texas Direct Auto on 2040-cars

Auto blog

Dodge Grand Caravan, Journey no longer available in the California emissions states

The Dodge Grand Caravan and the Dodge Journey are no longer available for sale in California or any of the states that follow its emissions standards (often referred to as the ZEV states). As reported by Allpar.com, the 3.6-liter Pentastar V6 in the Grand Caravan does not meet those emissions standards for 2020, and evidently neither does the 2.4-liter four-cylinder that is the sole engine offering in the Journey this year. The Pentastar V6 used in other Dodges, Chryslers and Jeeps is an updated unit that does not face the same emissions issues. The 2020 model year already was due to be the last for the Grand Caravan, which is being replaced in the lineup by a lower-priced and lower-spec version of the Chrysler Pacifica called the Chrysler Voyager. Production of the Grand Caravan at FCA's Windsor, Ontario factory is reportedly due to end in May. As for the Journey, that model has exceeded its sell-by date and is the oldest entrant in its class. The vehicle was introduced as a 2009 model, and not has seen major revisions in the 11 years since. For 2020, Dodge has cut the Journey model lineup to just two trim levels: SE Value and Crossroad (dropping the SE and the GT), and it's front-wheel drive only. But the Journey could continue — in some states at least — into the 2021 model year. Rumors of its replacement, with a sportier model based on the Alfa Romeo Stelvio, don't have it arriving until 2022 or so.

The Dodge Demon was developed under a cloud of smoke

The Dodge Demon needs no introduction. The car is so full of superlatives that most of it sounds unbelievable until you see and hear it in action. The car was revealed after months of teasers and cryptic messages, but the public weren't the only ones in the dark. From the start, the Demon's development was a closely guarded secret. There were even some within SRT that didn't know about the project. The people behind the car went through a lot of effort to keep it that way. At an event covering the finer details of the Demon's supercharged 6.2-liter V8, Dodge CEO Tim Kuniskis and SRT Powertrain Director Chris Cowland spoke about the smoke and mirrors used to hide the Demon's development. Work on the car progressed for nearly two years before it was made public, with just a small team having full access to the project. Numbers were altered. Secret meetings were held. SRT engineers worked nights and weekends while parts suppliers were given as little information as possible to move progress forward. Preliminary work on the Demon began in April of 2015, not long after the standard Hellcat hit the streets. The goal wasn't to create a faster Hellcat. Kuniskis said that would have been easy. They wanted a single-minded vehicle that could also be driven on the road. It's the same mindset that brought about the Dodge Viper ACR. Dodge wanted a car that could sell the brand to both enthusiasts and non-enthusiasts alike. 840 horsepower is going to raise anyone's eyebrows, including the Camry owner parked down the street. While preliminary work started in April, the final greenlight wasn't given until September. The project was originally going to revive the American Drag Racer, or ADR, name. When we saw the first hints of the Demon last fall, we labeled the spy photo above the Dodge Challenger ADR. It was set to have 10-percent more power and 20-percent more launch force than the already gut-punching Hellcat. It was also only going to have a quarter-mile time in the 10s, just slightly quicker than the Hellcat. Somewhere along the line, the team realized that the ADR wasn't enough. It was just going to be a Hellcat plus, and that wasn't exciting. The main goal was changed: 9s with light. Translated, that means a 9-second quarter mile with light under the tires (read: a wheelie). From that point forward, everything about the Demon's development, from power to suspension to weight, would be done in pursuit of that goal.

2018 Dodge Challenger Demon, 1970 Charger become Lego cars

As much as we all would have loved to buy one, Dodge made sure that it wouldn't be easy for everyone to own a 2018 Dodge Challenger SRT Demon. It was only built for one model year, with a total of 3,000 units, and the last one was built last summer. And even if they were still available, each one started at just under $85,000, a substantial chunk of change. But thanks to Lego, there's a comparatively cheap way to get a new Demon: in tiny brick form. The toy company has added another kit to its Speed Champions line featuring a yellow Challenger Demon. Since the Speed Champions cars are quite small, it's a somewhat rough facsimile of the car, but it's still instantly recognizable. It's blocky, it has a big hood scoop and fat fender flares. It also has two sets of wheel covers to customize it. This kit has an advantage over a real Demon, too: it comes with a second car. The other one is a 1970 Dodge Charger in black. This is an even more faithful rendition, thanks in part to the real car's ruler-straight lines. It doesn't have customizable wheels, but you can choose whether to leave it stock, or stick on a little replica of a supercharger and hood scoop that poke through the hood. It ends up looking like Dominic Toretto's Charger from The Fast and the Furious. Besides the second car, the kit features a drag strip starting tree. It doesn't light up, but it does have a slider on the back that lifts up each set of colored bricks as it's pressed down. So you can have little drag races with the two cars. In total, everything is built with 478 pieces, and it will cost you $29.99. The kit is available now wherever Lego kits are sold, and even at the Dodge merchandise website. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.