2007 3500 Laramie 4x4 Diesel Dually Mega Heated Leather Buckets Texas Truck on 2040-cars

Auto blog

Cruise Woodward Avenue with Autoblog's Dodge Challenger Hellcat

While Autoblog was consumed by coverage of the increasingly important Monterey Car Week last weekend, there was another big even going on. The Woodward Dream Cruise is significantly lighter in terms of news, but there's no denying that it's a far bigger, and far more egalitarian than what the wine-and-cheese crowd experience on the links at Pebble Beach. The Dream Cruise crams tens of thousands of cars and over a million spectators along a four-lane ribbon of asphalt between Ferndale and Pontiac, MI. What's remarkable aren't these numbers, though, so much as the distances they travel. Owners and admirers come from far and wide, across the United States and in some cases across the globe, to take in the spectacle. This year, local radio and television coverage featured fans that traveled from Japan, Australia, and Europe, just to take in the cruise. Of course, we realize that not everyone can make the pilgrimage to Woodward Avenue. With that fact in mind, we decided to bring a bit of the Dream Cruise to Autoblog with a time-lapse video of the cruise route. You can experience the good (a Lamborghini Gallardo, Chevrolet Chevelle, and Oldsmobile Cutlass 442), the bad (the traffic jams), and the ugly (no, your 2003 Ford Focus does not qualify as a classic, get the hell out of the cruiser lanes). So join us, as we turn off 8 Mile Road behind the wheel of our 2015 Dodge Challenger SRT Hellcat and run north, through Ferndale, Pleasant Ridge, Royal Oak, Huntington Woods, Berkley, Bloomfield Township, and Bloomfield Hills, before ending up on Wide Track Drive in Pontiac.

2015 Dodge Charger darts into NY traffic

Meet the refreshed 2015 Dodge Charger; notice anything different? You would have to be pretty farsighted to miss the sedan's new Dart-like nose, and it's likely going to be quite polarizing to the car's fans. Gone are the previous furrowed, aggressive headlights in favor of a wider, friendlier look.
While the more rounded headlights and narrower grille are going to be the first thing most people notice, Dodge claims its designers have made changes to nearly every panel on the Charger. The hood dips down deeper at the front, and the doors show off a more angled version of the car's shoulder blister. LED running lights and taillights are standard on all models, and SXT and RT trims get LED foglights. Even though the front might not be as intimidating, Dodge has hung onto the sedan's muscular stance with angular contours making up the rest of the redesign.
Under the hood is the same engine range you've come to know over recent years. Both the 5.7-liter V8 and the 3.6-liter V6 return for 2015, with the Hemi making 370 horsepower and 395 pound-feet of torque, and the standard Pentestar outputting 292 hp and 260 lb-ft. All models are now equipped with Chrysler's TorqueFlight eight-speed automatic as standard. Fuel economy for V8 Chargers is predicted at 16 miles per gallon city and 25 mpg highway, compared to 15 mpg / 25 mpg last year with a five-speed automatic. All models also come with electric power steering, and the axles are cast from aluminum to save weight.

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat