on 2040-cars

Auto blog

Jay Leno drives a 1970 Dodge Charger with 1,650 horsepower

When Jay Leno says a vehicle might have too much horsepower, he's got our attention piqued. That's exactly what he thinks about the 1970 Dodge Charger Tantrum from Wisconsin-based SpeedKore Performance. While it still looks like a classic muscle car, the front end now features a carbon fiber hood and fenders. Underneath the lightweight parts, there's a twin-turbo, 9.0-liter Mercury Marine offshore boat racing engine with an astonishing 1,650 horsepower, or an only slightly less asinine 1,350 hp on pump gas. Jay is very mechanically intrigued by the Charger at the beginning of this video, and puts it on the lift to take a look at the underside. The engine plumbing is a thing of beauty, and the mill packs a massive radiator and intercooler to keep things running cool. Leno's drive in the Tantrum is especially interesting. The beastly engine is difficult to control, and anything above half throttle in most gears can spin the rear tires. The significant turbo lag also makes the power unpredictable. When Jay finally finds a straight piece of road, he puts the hammer down and rockets into the distance. And, of course, you know Jay's not going to end the video without some suitably smoking tires. Related Video:

Jay Leno drives the Demon-powered SpeedKore carbon fiber Dodge Charger

Jay Leno drives all sorts of wild vehicles on his TV and YouTube series "Jay Leno's Garage," from concept cars to classics. Although many of the vehicles are museum quality, they don't all come through in straight by-the-book factory form, as Leno often likes to highlight the creative and insane builds from premium speciality aftermarket shops. One of his favorites is SpeedKore, which recently dropped by with its carbon-fiber-bodied 1970 Dodge Charger Evolution. After cementing itself as one of the best builds of the year at SEMA 2018, the high-performance Charger paid Leno a visit to show off its immaculately assembled blend of classic and modern Dodge. It's not the first time SpeedKore has stopped by, as they've previously shot videos together of the 1967 Chevrolet Camaro, the 2016 Ford Mustang Shelby GT350R, and the 1970 Dodge Charger Tantrum. The Charger featured here wears its Evolution name because it is an updated take on the Tantrum build (which had 1,650 horsepower, by the way), but the two are quite different. The Charger Evolution uses numerous parts from Dodge's recent superstars, the Challenger SRT Hellcat and the Challenger SRT Demon. In fact, it's one of the only ways in the world to drive a Demon engine with a manual transmission. Under the hood is the 6.2L Supercharged Hemi V8 from a Demon pre-production car, and SpeedKore has tuned it up to 966 horsepower. It pairs with a Tremec M6 6060 six-speed transmission from the Hellcat. At full bore, the whine of the supercharger paired with the grumble from the custom stainless steel SpeedKore exhaust headers makes for a thrilling, if not unharmonized, battle cry. Whereas some restomods have cut corners, shoddy build quality, or imperfect fittings, Leno notes that SpeedKore's work is top-notch, despite the entire exterior body and many pieces of the interior being fully replaced with glossy clear-coated exposed carbon fiber. According to SpeedKore Vice President Dave Salvaggio, the Charger weighs about 3,400 pounds. Check out the full video above or read full details from our time with the car at SEMA. And as a bonus, Autoblog photographer Drew Phillips recently got to spend a day shooting the Charger. His gallery of photos appears below. Speedkore 1970 Dodge Charger View 53 Photos

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.