Quad Cab 4x4 5.9 Cummins Diesel 6 Spd. Manual One Owner Immaculate Condition on 2040-cars

Auto blog

Roadkill pits every project car against each other

The guys behind Motor Trend's monthly Roadkill series have collected nine of their favorite project cars from their videos and pitted them against each other in a battle royale to determine a winner. It's 44 minutes long, but it's completely worth the investment of time.
The cars run the gamut from a 1973 Chevrolet Ramp Truck, a 1975 AMC Pacer and a legitimately impressive 1967 Chevy Camaro, and they are pitted against each other to see which is the fastest around an autocross course. The drivers include Roadkill's two hosts and Motor Trend's Johnny Lieberman and Carlos Lago. It's reminiscent of the best episodes of Top Gear and worth a watch.
So it's the weekend - the perfect time to relax. Grab your preferred beverage, get comfortable and enjoy 44 minutes of some seriously ratty but utterly cool project cars as they are throttled within an inch of their lives (or past it). Scroll down to check out the video.

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat

NC dealer creates the convertible Challenger that Dodge won't build

Dodge still hasn't turned the Challenger into a convertible, and the odds of seeing a factory-built drop-top muscle car appear in showrooms are decreasing annually. Tired of waiting, a dealership in North Carolina teamed up with a Florida-based body shop to create a topless alternative to the Ford Mustang and the Chevrolet Camaro. It's the real thing, and it's for sale. Keffer Dodge, Chrysler, Ram and Jeep shipped three 2019 Challengers to a shop named Convertible Builders, according to Motor Authority. After losing their lid, they gained a cloth soft top that opens and closes at the push of a button. There's no word on what effect the conversion has on handling, or what Convertible Builders did to offset the loss of structural rigidity. The build didn't include mechanical modifications. Two of the convertibles are R/T Scat Pack models equipped with a 6.4-liter Hemi V8 engine that serves 485 horsepower and 475 pound-feet of torque. It's not a supercharged Hellcat V8, but it's potent enough to spin the rear wheels in third gear. The third, R/T-based model features a 375-horsepower, 5.7-liter V8. While our dream build would use a six-speed manual transmission, all three come with an eight-speed automatic that sends the engine's power to the rear wheels. Keffer's website lists the gray, white, and red cars at $64,000, $60,000, and $56,300, respectively. The regular R/T Scat Pack Widebody model starts at $46,245, and the eight-speed automatic adds another $1,595, so the convertible conversion adds about $16,000. It's your only option, unless you're brave enough to chop the top yourself, or patient enough to wait until the early 2020s. Dodge has already started developing the next-generation Challenger, so the current car is unlikely to spawn a convertible before it retires. Its replacement due out in 2021 or 2022 will allegedly ride on a wider, longer evolution of the Giorgio platform found under the Alfa Romeo Giulia, among other models, and unverified rumors claim it's being designed with a topless variant in mind from the get-go. It might resurrect the Barracuda nameplate originally assigned to Plymouth when it makes its debut. Auto News Dodge Convertible Performance