Dodge Ram 2500 Diesel 4x4 on 2040-cars
Auburn, Illinois, United States
|
Hello, you are bidding on a 2004 dodge ram 2500 4x4. This truck has been well maintained mechanically. The truck has had ball joints, front axle u joints, and sway bar end links replaced within the last year (or 8k ish miles). The truck has a factory remanufactured transmission that was replaced around 100k miles I would have to look on the paperwork to be exact which leads to the next point. All of the work described I have the receipts for so if you would like to see what all has been done I keep all receipts for the truck with the truck so that is no problem. The truck has always had full synthetic oil ran it and about 6 months ago the trans fluid transfer case fluid and axle fluids were all changed to synthetic oils as well. the truck is an awesome truck and will do anything that you ask of it. As for mods the truck is mostly stock. The truck has a K&N air intake and 5 inch turbo back exhaust with resonator. It has new tires put on just before winter which puts them with just around 10k miles on them. They are currently on the set of American racing wheels that you see pictured but those wheels will be taken off unless you would like to pay a bit extra for them, otherwise the factory wheels will be reinstalled with these tires on them. The interior is all factory with no rips or tears. Truck has never been smoked in and the seats have no stains, and is very clean overall. The one downfall to this truck is it has rusty rockers and cab corners but for any of you body guys out there you know that it is a fairly inexpensive repair and could be fixed cheaply, I choose to use my limited funds to upkeep the truck mechanically instead of the body work that I know can be done at any time. This is the only flaw with the entire truck and really isn't a big deal at all. This isn't a have to sell situation so I wont take crazy low ball offers but if you would like to shoot me a reasonable offer I will consider it and if I accept I will pull auction down early. The truck is also for sale locally so I do reserve the right to end the auction early. If you have any questions PLEASE feel free to call or text me (Drake) at 217 six 9 one 6466.
|
Dodge Ram 2500 for Sale
Dodge ram 2500 / nicest in country / like new / dealer serviced / 100% loaded
97 ram 2500 slt laramie 12-valve 5.9l cummins 5spd 4x4 longbed 2owners carfax tx(US $14,995.00)
5.9 cummins r2500
2006 dodge ram 2500 laramie 4x4 quad cab(US $23,999.00)
Dodge ram 2500 slt 5.7l hemi 18mpg
2006 dodge ram 2500 quad cab trx4 4x4 cummins diesel 5.9l lifted 37s(US $23,777.00)
Auto Services in Illinois
Wolf and Cermak Auto ★★★★★
Wheels Of Chicagoland ★★★★★
Urban Tanks Custom Vehicle Out ★★★★★
Towing Solutions ★★★★★
Top Coverage Ltd ★★★★★
Supreme Automotive & Trans ★★★★★
Auto blog
Chrysler earns $1.7B in 2012, revises product plans for US
Wed, 30 Jan 2013Hot on the heels of Ford's earnings announcement for the year that was, Chrysler today reported a 2012 net income of $1.7 billion, up substantially from the comparatively minuscule $183 million profit earned in 2011 when it repaid its US government loans.
Chrysler's good year ended with an excellent fourth quarter that saw net income rise 68 percent from $225 million in 2011 to $378 million. Where are all those extra earnings coming from? Market share, which Chrysler saw increase to 11.4% last year on sales of 1.65 million vehicles. In fact, the Auburn Hills, MI-based automaker out-paced the industry's market growth of 13 percent last year with sales up 21 percent for the year.
The company also revealed an updated product plan for its Chrysler Group and Fiat brands that looks all the way out to 2016. It's an updated version of the plan introduced in 2009 shortly after Fiat took control of the American automaker, and includes such new additions as an Alfa Romeo model, likely the 4C, to be introduced in the US this year, as well five more Alfa models by 2016. Likewise, Fiat will be growing by an additional seven models in the coming few years.
Dodge Durango Shaker concept: A 392 V8 in front of six Viper seats
Tue, Nov 1 2016When done right, a parts-bin special can be a beautiful thing. This Dodge Durango Shaker concept for the 2016 SEMA show is one such vehicle, and it's easily our favorite Mopar debuting in Vegas. The key, of course, is pulling from the right bins. Take a tour and you'll see Charger, Challenger, and Viper pieces grafted onto this slick crossover. The featured special part is the big, 6.4-liter 392 Hemi V8 that's been dropped under the hood; it's sourced from the SRT Challenger and Charger where it makes 485 horsepower and 475 pound-feet of torque. With that in place, the fabricators cut a big hole in that hood for the Challenger's awesome optional shaker scoop. It wasn't an easy installation; it required a custom spacer for the intake to make sure everything lined up with the hole properly. View 17 Photos Apparently there were some Viper seats lying around, so six of them were stuck into this Durango. Makes sense. It does lose a bit of people-carrying capability as a result, since only two seats fit in each row, and the seats don't fold for extra cargo room. A Dodge spokesperson attested to the fact that all three rows are usable, if not totally comfortable. But then stock third-row seats aren't always that comfortable anyway. Seriously, though, Viper seats. We don't care how comfortable or usable the result is. Although you might not give it a second thought, even the fuel filler needed some special attention. This piece was also lifted from a Dodge Challenger, and it was taken along with the surrounding sheet metal. Because of the different orientation of the filler cover on the Challenger, the builders decided the easiest way to get it to fit was to chop the fuel filler section out and weld it onto the Durango. The designers also put a little blue Stig on the cover. And those are just the cool parts that were hard to install. This Durango features plenty of other slick details, like the custom bumpers, fender flares, and side skirts. Everything is painted B5 Blue with matte black and carbon accents all around. Up front, the bumper hides a pair of fog lights stolen from a Challenger Hellcat – and yes, they're the ones with intakes in the middle. The grille is also a custom piece, losing the standard crosshair design for better airflow. The fender flares cover up some seriously wide, 305-section tires at all four corners, which are hauled down by Hellcat brakes. The rear bumper bumper contains a stylish center-exit exhaust with dual tips.
Coal-rolling Ram dually does tandem beer-shooting burnout with ATV in bed
Fri, 25 Jul 2014Sometimes a video comes around that just makes you shake your head in disbelief. Take for example these guys from Nebraska in their dually diesel flatbed Ram, doing a smoky burnout. Lighting up the tires is nothing new, but these folks take things a step further by having another guy on an ATV in bed that is also smoking the tires. Finally, people are sitting on a couch in the bed taking the whole show in, as beer cans shoot out of the stacks.
There have been several stories recently about the scourge of rolling coal, i.e., diesel trucks modified to lay down a thick, black smoke screen, sometimes for vaguely political reasons. Whatever your opinion is on it, breathing in this much nasty stuff isn't exactly great for your health. Of course, it turns out that burning rubber is pretty awful, too. Both diesel and tire emissions contain cancer-causing Group 1 carcinogens. Combine them with the cigarette smoking here, and these guys are an oncologist's nightmare. Scroll down to take it all in for yourself. Warning, there is a little explicit language.










