5.9l Cummins Diesel 4x4 Certified Big Horn Infinity 6cd Mp3 Lift 18in Wheels on 2040-cars

Auto blog

500+ hp Stellantis 'Hurricane' I6 previews a world without Hemis

After years of rumored development, Stellantis has revealed its new six-cylinder engine family. The 3.0-liter, twin-turbocharged "Hurricane" I6 will offer V8 power, forced induction torque and six-cylinder efficiency in a package designed to fit into any of the company's North American rear-wheel-drive platforms.  What is "V8 power," exactly? Well, in standard output guise, the new I6 cranks out more than 400 horsepower (the specific figure will vary by application) and 450 pound-feet of torque, while the high-output variant is good for more than 500 horses and 475 lb-ft. The final figures will be dependent on the application. We'll save you a little legwork: In current Ram, Jeep and Dodge products, the 5.7-liter Hemi tops out at about 395 hp and 410 lb-ft, give or take, and the 6.4-liter around 485 hp and 475 lb-ft.    This is a clean-sheet design that is only related to the company's turbocharged four-cylinder by some common measurements. The I6 is exclusively direct-injection (no hybrid/port-injection here) and the two I6 variants share 96 common parts, including the block and oil pan design. The differences are found in their internals, intake plumbing, valvetrain components and the turbochargers themselves. Stellantis is not yet ready to share specs or supplier info for the turbos but says announcements will come from its partners soon.  The standard-output I6 has a compression ratio of 10.4:1 and revs to 5,800 rpm. It will run on regular fuel, albeit with reduced performance; 91 octane is recommended for maximum output. The high-output variant has a compression ratio of 9.4:1 and will rev to 6,100 rpm. That one will require premium. The new I6's advantages go beyond basic power output. Every Hemi family engine currently in production is based on an iron block design, so they're heavy. The aluminum-block I6 shaves weight off the total engine package, even if some of that gets added back thanks to the turbos and their associated plumbing. The standard-output I6 weighs 430 pounds, Stellantis engineers told us; the high-output adds just another 11. Fully dressed 5.7-liter V8s are in the 550-560-pound ballpark, and 6.4-liters close in on 600 pounds.  You may be wondering, "Why a clean-sheet gasoline engine now, when the industry is moving toward battery-electrics?" A valid inquiry, and one Stellantis was prepared to address. While the company will be pivoting to electrification over the next decade, it won't be instantaneous.

Tempted by the Demon, dealers find way to thwart Dodge, jack up prices

It's the eternal story of short supply, big demand - and car dealers eager to exploit that dynamic, especially when it involves a hot car. A few weeks ago, when Dodge announced that it devised a way to attempt to prevent price-gouging on those 840-horsepower 2018 Dodge Demons, you just knew the dealers would dream up some devilish end-run. And sure enough, despite the manufacturer's best intentions, Demon order slots are being offered with five-figure markups. Here's how things were supposed to work: With a run of just 3,000 cars, Dodge knew it had to do something to address dealer greed, so it announced an allocation system: Cars purchased at or below the $86,090 MSRP would be the first orders filled and delivered. If a dealer sells an allocated Demon for more than sticker, that car goes to the end of the line for production and delivery. Dodge also ensured dealers wouldn't stockpile or hoard Demons by limiting the number of orders a dealer can submit and allocating cars to dealers based on how many Challenger and Charger Hellcats the dealer has sold. But Automotive News reports that some dealers are using intermediaries to auction off their Demon allocations on eBay. Three sellers last week said they were representing dealers in South Carolina, Tennessee and Louisiana, and auctioning off the right to buy a car in one of the priority spots at MSRP. The minimum bid for the right to buy the car at sticker? From $10,000-25,000. And previous transactions on eBay might have run as high as $75,000. So early buyers are definitely paying an upcharge - but it's a thing apart from the bottom line on the order form, where it appears they are paying MSRP. In other words, a scheme that violates the spirit of what FCA tried to do. A source at FCA told Automotive News the automaker was monitoring the practice but could do little to stop it. And the report quoted a Hellcat owner who said his dealership was ignoring Dodge's strictures altogether and offered him a Demon at MSRP plus $60K. But take heart. Not all car dealers are cynically opportunistic - or rather, some see an opportunity for doing good, not making buck. Automotive News says Bill Marsh Chrysler in Traverse City, Mich., plans to sell its single allocated Demon for $1 under MSRP - and is auctioning off the right to buy it, with the dealership's existing customers eligible to bid. The auction's proceeds will benefit four Traverse City charities.

Weekly Recap: Ferrari plans to gradually increase production by 2019

Ferrari has long been known for the exclusivity of its performance machines. It's on a different level than Porsche, BMW, and Mercedes. But as it transitions to a new era of independence from Fiat Chrysler, Ferrari is going to get a little less exclusive. It's by design, and it means a subtle, slow ramp-up of production – a move Ferrari believes will ensure its future by meeting growing demand in new markets. The strategy was detailed in SEC documents filed this month as part of the company's pending stock offering. The files reveal Ferrari will gradually increase shipments to about 9,000 units per year by 2019. This is a reversal of Ferrari's 2013 plans to cap production at 7,000 cars annually, which it hit on the nose that year. Ferrari shipments inched up to 7,255 in 2014, though that's down from 2012's record tally of 7,405. Ferrari is a vastly different operation than it was in 2013. Longtime chairman Luca di Montezemolo stepped down last fall, and FCA chief executive Sergio Marchionne has been overseeing the company since then. Its IPO has attracted high levels of attention from enthusiasts and investors. As expected, demand has reportedly outstripped the availability of the stock, which has an estimated offering price of $48 to $52 a share. Speaking of more Ferraris, the company revealed a limited-edition model this week called the F12tdf (shown above). Based on the F12 Berlinetta, the car is a salute to the Tour de France endurance auto race that Ferrari dominated in the 1950s and '60s. The V12 engine's output increases to 769 horsepower, while weight is cut by 243 pounds – allowing for a sprint to 60 mph in 2.9 seconds. Dramatic carbon-fiber elements and a radical redesign of the body panels give the F12 a more dramatic look. It will be limited to 799 units over the life of the car. If this is how Ferrari is increasing production, we're more than okay with the company's new strategy. OTHER NEWS & NOTES Tesla software unlocks Autopilot features Tesla released the latest version of its software for the Model S this week, which allows the all-electric sedan to drive in a semi-autonomous state called Autopilot. Tesla Version 7.0 enables the Model S to maintain lane position, change lanes by touching the turn signal, and manage the car's speed using an advanced, traffic-sensing cruise control. It also has a parallel parking feature, which searches for open spots and then parks your Tesla.