49k Low Miles Dodge Ram 2500 Truck 4x4 Mega Cab Black Cummins Diesel Tech Pkg on 2040-cars

Auto blog

Stellantis invests more than $100 million in California lithium project

Stellantis said it would invest more than $100 million in California's Controlled Thermal Resources, its latest bet on the direct lithium extraction (DLE) sector amid the global hunt for new sources of the electric vehicle battery metal. The investment by the Chrysler and Jeep parent announced on Thursday comes as the green energy transition and U.S. Inflation Reduction Act have fueled concerns that supplies of lithium and other materials may fall short of strong demand forecasts. DLE technologies vary, but each aims to mechanically filter lithium from salty brine deposits and thus avoid the need for open pit mines or large evaporation ponds, the two most common but environmentally challenging ways to extract the battery metal. Stellantis, which has said half of its fleet will be electric by 2030, also agreed to nearly triple the amount of lithium it will buy from Controlled Thermal, boosting a previous order to 65,000 metric tons annually for at least 10 years, starting in 2027. "This is a significant investment and goes a long way toward developing this key project," Controlled Thermal CEO Rod Colwell said in an interview. The company plans to spend more than $1 billion to separate lithium from superhot geothermal brines extracted from beneath California's Salton Sea after flashing steam off those brines to spin turbines that will produce electricity starting next year. That renewable power is expected to cut the amount of carbon emitted during lithium production. Rival Berkshire Hathaway has struggled to produce lithium from the same area given large concentrations of silica in the brine that can form glass when cooled, clogging pipes. Colwell said a $65 million facility recently installed by Controlled Thermal can remove that silica and other unwanted metals. DLE equipment licensed from Koch Industries would then remove the lithium. "We're very happy with the equipment," he said. "We're going to deliver. There's just no doubt about it." Stellantis CEO Carlos Tavares called the Controlled Thermal partnership "an important step in our care for our customers and our planet as we work to provide clean, safe and affordable mobility." Both companies declined to provide the specific investment amount. Controlled Thermal aims to obtain final permits by October and start construction of a commercial lithium plant soon thereafter, Colwell said. Goldman Sachs is leading the search for additional debt and equity financing, he added.

Mopar highlights wild SEMA creations, AWD Challenger Concept

Thanks to 15,345 square feet of display area, FCA US' Mopar division certainly has ample space to display its parts and accessories at the SEMA Show. To lure attendees to check out all of those cars and components, the company is now revealing ten tuned vehicles for this year's aftermarket event. This isn't even the brand's whole fleet for the show, but it includes some major highlights for Dodge and Ram fans. A lack of traction traditionally makes rear-wheel-drive muscle cars dismal to drive when the weather gets slippery, but the Dodge Challenger GT AWD Concept (above) solves that age-old problem at SEMA. In addition to powering all four wheels through an eight-speed automatic, it boasts an angry-looking, wide-body kit with aggressively flared wheel arches. The asymmetrical stripe with Header Orange accents also adds some extra panache to the Destroyer Grey and Matte Black color scheme. The coupe can back up the macho look thanks to the Scat Pack 3 Performance Kit that adds 75 horsepower and 44 pound-feet of torque to the 5.7-liter V8. However, before you get too excited about driving one this winter, FCA US spokesperson Ariel Gavilan tells Autoblog: "It is only a concept." Mopar isn't done tuning Dodges for SEMA. The Charger Deep Stage 3 shows what's possible with the company's catalog by packing the Scat Pack 3, strut tower braces, coilover suspension kit, and bigger brakes. Meanwhile, the blacked-out Dart GLH Concept tries to harken back to the style of the famous Omni GLH by fitting a red-accented body kit, including a Mopar Performance aluminum hood. If the standard Ram 1500 Rebel is somehow too subdued, check out the Rebel X (right) in a vibrant shade called Copper. To be ready for anything offroad, it wears some muscular flares to fit 17-inch beadlock wheels and 35-inch Toyo tires. A concept, two-piece front skid plate protects the front. Drivers should also be comfortable no matter where they drive thanks to prototype Katzkin leather seats and a concept air-ride suspension. Chrysler enjoys some mods, as well. The 300 Super S has suave style with Matte Cerulean paint, concept 22-inch wheels, and a grille with little Mopar Ms dotted around it. Performance also sees a boost with a tuned engine, bigger brakes, and coilover kit. The gray 200 S Mopar is similarly stylish with a complete body kit, including a conceptual, dual-vented hood. Fiat and Ram's commercial models aren't left out of the SEMA fun, either.

1968 Dodge Super Charger is a super Charger with a supercharger

Mopar's latest custom creation is sure to be in the running for coolest car at this year's SEMA show. It's a 1968 Dodge Charger, a car selected in part because this year marks the car's 50th anniversary, but taken to the extreme and renamed Super Charger. The headliner of the car's radical upgrades is the new "Hellephant" engine. It's a take on the original car's 426-cubic-inch Hemi V8. But this new engine, with the same displacement, is based on the current Hemi V8, and adds a supercharger. All told, it makes a whopping 1,000 horsepower and 950 pound-feet of torque on 93 octane pump gas. It will be available as a crate engine, too. The engine is far from the only impressive change to the car. All over the body are mild to wild tweaks. The wide, uninterrupted grille from the original is still here, but it's a one-piece example now. And instead of hiding the headlights behind doors that have to open for illumination, the lights simply shine through the grille, retaining a clean look even at night. The whole car sits 2.5 inches lower than stock, and it's now four inches wider thanks to the huge fender flares. They house 305-mm-wide tires up front, and 315-mm tires in the rear. Likely the most complicated change to the car is the lengthened wheelbase. There are two more inches between the wheels now, something Mopar did to reduce the front overhang. A close second in complexity are the taillights. They're the same shape as the originals, but now the round elements are actually exhaust outlets. The tips also happen to be the same as those on the Alfa Romeo Stelvio. There are other details that help bring together the exterior. The rain rails have been smoothed out on the roof, the vent windows removed, special 426 stickers have been added, and the fuel door now has a Hellephant badge with a blue background with lots of little Mopar Ms. The interior gets some attention, too. The rear seat has been removed, Dodge Demon style. It gets a custom roll bar designed to be as unobtrusive as possible, even getting the hoop around the seats to roughly line up with where the windows meet. Gauges come from the Mopar catalog, and the steering wheel and seats are from the dearly departed Dodge Viper. They're particularly relevant, as the six-speed manual transmission comes from the Viper, too. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.