2014 Dodge Ram 2500 Crew 5.7l Hemi 6-pass Bedliner 13k Texas Direct Auto on 2040-cars

Auto blog

Junkyard Gem: 1987 Dodge Ram 50 with V8 swap

Chrysler did very well selling Mitsubishi Forte pickups with Plymouth and Dodge badging in the United States, even after Mitsubishi began moving the same trucks out of their own American dealerships in 1982. The 1987 Ram 50 2WD short bed weighed in at just over 2,500 pounds, so it was reasonably perky with its 2.0-liter G63B four-banger making 90 horsepower… but there's no replacement for displacement! At some point along the line, a Chrysler small-block V8 engine found its way into the engine compartment of this truck, now residing in a car graveyard in Sparks, Nevada. This was the cheapest new Dodge-branded pickup Americans could buy as a 1987 model, though it had to compete with its near-identical Mitsubishi Mighty Max twin for sales. The 1980s were great times for little pickups in the United States, but a desire for bigger cabs and more creature comforts doomed them by the dawn of the following decade. The most interesting thing about this engine swap is that it didn't involve a Chevrolet or Ford small-block V8. Both the Chevy small-block and Ford Windsor V8s are a few inches narrower than the Chrysler LA-series V8, which makes them easier to stuff into a small vehicle. It appears that engine length was the critical dimension in this case, since the Mopar seems to have had enough side-to-side clearance to avoid any slicing of Mitsubishi steel to make it fit. My guess is that whoever did the swap happened to have the engine handy and that's why it's here. Keeping it all Dodge might have been a factor in the decision as well, though the truck's Mitsubishi ancestry makes that unlikely. It was over 100°F out when I found this truck, so I wasn't motivated to check block casting numbers to determine exactly which LA engine we're dealing with here. The easiest LAs to get cheap for the last four or so decades have been the 318 (5.1-liter) and the 360 (5.8-liter), so one of those two is the most likely candidate here. Power levels for these engines got pretty dismal during the Malaise Era, but anyone with the wrenching skills to do this swap would have applied some basic power-enhancing wizardry before the engine went in. We can see there's an Edelbrock Performer intake manifold, and you might as well stab in a better camshaft if you're upgrading the intake. How much power? With a four-barrel carburetor on a dual-plane intake plus a meaner cam, 300 to 350 horsepower is easily achieved with one of these engines, even with stock exhaust manifolds.

2020 Dodge Charger Widebody Daytona wrecked with 296 miles on the clock

The Dodge Charger SRT Hellcat Widebody Daytona 50th Anniversary Edition can do 0-60 faster than you can say its name, and one new owner appears to have proven that it can all go wrong just as quickly. This one-of-501 sedan currently resting on a Copart lot in California has already met its end.  Dodge named the model after NASCAR's season-opening venue. The Daytona 500 gets the numerical part of its name from the length of the race — 500 miles. This poor White Knuckle example didn't even live long enough to put that much distance behind it; it shows just 296 miles on its odometer, says Motor1.com, who spotted the wreck on Copart.  This poor Widebody suffered a front-end accident severe enough to pop the airbags, which is never a good sign. Both front fenders took a beating, and the passenger-side panel was ripped off completely. The hood was badly buckled in several places, and the bumper covers appear pretty badly thrashed. It's difficult to tell from these photos whether the front crash structure was badly mangled, but we suspect it didn't come out unscathed. The passenger-side front suspension clearly took a beating, as the tire on that side was de-beaded from the wheel.  On the bright side, multiple images show that the car's electrical system is intact; whether it starts and runs is another matter.  The Daytona 50th Anniversary Edition package is, fundamentally at least, little more than a plaque, a sticker package, and a re-rated 717 peak horsepower. What you really get for your money is exclusivity, and thanks to this little "oops," there's more of that to be had. Only 501 were built (to commemorate the number of production units required to homologate the original Charger Daytona for NASCAR racing); just 451 went to U.S. dealers, and the other 50 were reserved for the Great White North where it's built. These models are so scarce that some dealers were already tacking on tens of thousands of dollars in additional markup. Back in December, at least one dealer had slapped a $25,000 market adjustment on a Daytona model (in the same "White Knuckle" finish as the wrecked car here), and others were being spotted with similar tacked-on premiums.  Related Video:    

FCA applies to trademark 'Hornet' and 'Dodge Hornet' names

FCA's trademark binge on March 6 isn't the only time this month that the automaker's appealed to the U.S. Patent and Trademark Office. Motor Trend discovered two applications FCA submitted on March 3, one for "Dodge Hornet," the other simply for "Hornet." The automaker requested to reserve both names in Canada and Mexico, too. The only time Dodge has ever used the Hornet name was on a chunky, four-door subcompact hatchback revealed at the 2006 Geneva Motor Show, planned for the European market with a 170-horsepower engine developed with BMW. Crowds loved the car, encouraging Chrysler to find a way to put it into production. What followed was three years of aborted platform-swapping efforts first with Chinese automaker Chery and then with Nissan before Chrysler gave up. In 2009, analysts suspected new owner Fiat might try to get a Hornet done on one of the Italian automaker's European platforms. Nothing came of that, either, FCA opting to resurrect another historical nameplate for the Dodge Dart sedan in 2011. If a new Dodge model gets the Hornet label, the best guess for a product that needs to succeed in North America is a crossover. With the Grand Caravan soon headed to pasture and the Journey expected to follow soon after, the brand will be left with a big sedan, a big coupe, and a big three-row crossover. A reborn Hornet could pick up where the concept left off, slotting into the compact space left by the outgoing Journey and where models like the Nitro and Caliber once lived. Another guess posits something a little larger, based off the Chrysler Pacifica platform, to lower development costs and increase utilization at the Windsor, Ontario, plant that builds the Pacifica and Grand Caravan. Or the Hornet could be a PSA Group model reworked into service for our market; that opens up the size choices, although PSA is moving all of its products to two platforms, both front-wheel-drive based. It's possible Dodge won't do anything with the name, the recent application nothing more than an attempt to reserve company property. Hudson reserved Hornet in 1950 for a sedan built from 1951 to 1954. After Hudson merged with Nash to form AMC, AMC used the name on a compact sedan built from 1969 to 1977. Chrysler took over AMC in 1987, letting the Hornet trademark expire in 1992.