2007 Ram 2500 Turbo 6.7l I6 24v 4wd Heated Leather Keyless Entry Cd Gray on 2040-cars

Auto blog

Chrysler recalling over 200k vehicles across its brands

With more than 200,000 units across six separate recalls and almost all of its brands, it appears that Chrysler has officially jumped headfirst into the recall pool this month. The National Highway Traffic Safety Administration has issued three official recalls for the automaker, and The Detroit News is reporting that the automaker itself has announced three more.
The biggest of the recalls applies to about 120,000 Dodge Charger, Dodge Challenger and Chrysler 300 models for 2011 and 2012 due to faulty wiring harnesses for the seat-mounted side airbags, which could lead to these airbags not deploying in the event of a crash. A little more than 60,000 two-wheel-drive versions of the 2007-2008 Dodge Nitro and 2008 Jeep Liberty SUVs are being recalled due to a heat shield that could cause the driveshaft to break, which if that isn't bad on its own, could then hit underneath where the airbag sensor is mounted, causing the airbags to deploy. Wrapping up NHTSA's recall notices, about 20,000 Jeep Patriot and Jeep Compass models for 2012 are also being recalled due to a problem with the fuel tank transfer tube that could lead to the vehicle stalling. The LX car recall campaign is going into effect this month, while the other two will start next month - all three notices are posted below.
In addition to the official NHTSA recalls, The Detroit News is also reporting that Chrysler is recalling more than 16,000 Ram trucks and a small number of Dodge Dart sedans. Around 6,500 2013 Ram 1500 trucks will be recalled due to an improper adjustment of the parking brake cable from the factory, while 7,000 Cummins-powered 2013 Ram Heavy Duty trucks are being recalled due to an engine cover that does not have as much heat resistance as it is supposed to. Finally, a total of 46 Dodge Dart sedans are being recalled due to a problem with the brake calipers and/or parking brake.

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.

Macron and Le Pen decry 'shocking' Stellantis CEO pay

PARIS — French President Emmanuel Macron and his far-right challenger in the French presidential vote, Marine Le Pen, on Friday both decried as “shocking” the multimillion euro payout to the CEO of carmaker Stellantis. Stellantis CEO Carlos TavaresÂ’ remuneration package of 19.15 million euros just a year after the company was formed became an issue as Macron and Le Pen campaigned ahead of the April 24 runoff vote. Polls show purchasing power and inflation are a top voter concern. Stellantis was formed last year through the merger of PSA Peugeot and Fiat Chrysler Automobiles. Centrist President Emmanuel Macron, perceived by many voters as being too pro-business, called the pay package “astronomical” and pushed for a Europe-wide effort to set ceilings on “abusive” executive pay. “ItÂ’s shocking, itÂ’s excessive,” he said Friday on broadcaster France-Info. “People canÂ’t have problems with purchasing power, difficulties, the anguish theyÂ’re living with, and see these sums. Otherwise, society will explode.” Far-right leader Marine Le Pen, who enjoys support from many working-class voters, called for bringing in more workers as shareholders. “Of course itÂ’s shocking, and itÂ’s even more shocking when it is the CEOs who have pushed their society into difficulty,” she said Friday on BFM television. “One of the ways to diminish this pay, which is often out of proportion with economic life, is perhaps to allow workers in as shareholders.” Stellantis continued to back the package despite a 52.1% to 47.9% vote rejecting it at an annual shareholders' meeting chaired from the Netherlands, where the company is legally based, on Wednesday. The company, citing Dutch civil code, noted that the vote is advisory and not binding. The company later said in a statement that it took note of the vote, and will explain in an upcoming 2022 remuneration report “how this vote has been taken into account.” In the 2021 report, the company identified peer group companies that it used as a salary benchmark, including U.S. companies like Boeing, Exxon Mobile, General Electric as well as carmakers Ford and General Motors. Stellantis, whose brands include Peugeot, Fiat, Jeep, Opel and Maserati, reported net profits last year had tripled to 13.4 billion euros ($15.2 billion). The French government is the third-largest shareholder in Stellantis, with a 6.15% stake through the Bpifrance Participations S.A. French public investment bank.