2006 Dodge Ram 2500 Quad Cab Slt Diesel on 2040-cars

Auto blog

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.

Stellantis reports $15B profit in first year of merger

FRANKFURT, Germany — Automaker Stellantis said Wednesday that it made 13.4 billion euros ($15.2 billion) in its first year after it was formed from the merger of Fiat Chrysler Automobiles and PSA Group. The earnings nearly tripled profits compared with its pre-merger existence as two separate companies, as the maker of Jeep, Opel and Peugeot vehicles exploited cost efficiencies from combining the businesses. The result compared to a combined 4.79 billion euros for the separate companies in 2020 before the merger, which took effect on Jan. 17, 2021. Revenue for the combined business rose 14%, to 152 billion euros. CEO Carlos Tavares said the results “prove that Stellantis is well positioned to deliver strong performance" and had overcome “intense headwinds” during the year. Automakers have struggled with shortages of key parts such as semiconductor electronic components and rising costs for raw materials as the global rebound from the worst of the coronavirus pandemic brings more demand. The company said the benefits of the merger were worth some 3.2 billion euros during the year. Mergers can lead to streamlined costs as companies combine functions and spread fixed costs over a larger revenue base. The company accelerated its rollout of battery-powered vehicles, with sales of low-emission vehicles reaching 388,000 — an increase of 160%. Stricter environmental regulations in Europe and China are pushing automakers to roll out more electric vehicles with longer range. Stellantis started production of a hydrogen fuel cell commercial van under its Opel brand in December. Stellantis' other brands include Chrysler, Citroen, DS, Fiat, Maserati, Ram and Vauxhall. Related video: Earnings/Financials Chrysler Dodge Ferrari Fiat Jeep RAM Citroen Opel Peugeot Vauxhall

Fiat Chrysler halts European production as coronavirus hits demand

MILAN — Fiat Chrysler Automobiles (FCA) is halting production for two weeks at most of its European plants to help protect staff against the coronavirus pandemic and adjust to a slump in demand, the Italian-American carmaker said on Monday. Italy has been the European country worst hit by the crisis and the first to enforce a nationwide lockdown, which has now been replicated by Spain and, to a lesser extent, by France as the virus sweeps through the continent. With all non essential services closed, including car dealers, and people forced home except for strict working needs, many forecast a heavy fall in car sales in March. FCA — which according to analyst estimates produces around 25% of its vehicles in Europe — said the suspensions through March 27 would allow it "to effectively respond to the interruption in market demand by ensuring the optimization of supply." Ferrari, meanwhile, said it closed its two plants until March 27. Ferrari said it had so far ensured production continuity, and it already implemented all the health measures decided by the Italian government at the two sites, in hometown Maranello and in Modena. But it was "now experiencing the first serious supply chain issues, which no longer allow for continued production." Marco Opipari, an analyst at Fidentiis, said a few weeks of closures was not a big problem in an over-supplied European auto industry and lost production could be recovered later on. "The real problem is on the demand side, people are not buying cars now, and sales volumes are expected to be very bad in March, with a real impact on automakers' earnings," he said. FCA said in a statement that production for its FCA Italy and luxury Maserati units would stop for two weeks, extending a temporary closure period already planned for some Italian facilities. Affected plants are Melfi, Pomigliano, Cassino, Mirafiori, Grugliasco and Modena in Italy, Kragujevac in Serbia and Tychy in Poland. The FIOM union said FCA's decision was "necessary". The carmaker said the freeze would help it to resume activity promptly once market conditions allow it. "The group is working with its supply base and business partners to be ready to enable our manufacturing operations to deliver previously planned total levels of production despite the suspension when market demand returns," it said.