2006 Dodge Ram 2500 Diesel 4x4 Slt Quad Cab on 2040-cars

Auto blog

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.

Hennessey Dodge Demon sets hellishly fast quarter-mile time

The Dodge Demon doesn't strike us as a muscle car much in need of a performance makeover. After all, this 840-horsepower MoPar machine's voracious quest for straight-line speed means it trims weight by jettisoning everything from a front passenger seat and rear seat, to its stereo and all carpeting in the trunk. The folks at Hennessey apparently think that's not nearly extreme enough. So, the Texas-based tuning outfit has turned the Demon into a 1,035-horsepower mega beast that runs a quarter-mile in 9.14 seconds at 152 mph. That's fast, really fast. In fact, the HPE1000 is now the world's fastest Dodge Demon, having set its record-setting pace at Lonestar Motorsports Park on May 8. "The 2018 Demon is a street-legal rocket from Dodge, but we wanted to take the car's impressive track times to an industry leading level." said president and company founder, John Hennessey. For comparison, the stock Dodge Demon is credited with running the quarter-mile in 9.65 seconds at 140 mph. The main HPE1000 modification involves replacing the stock 2.7-liter supercharger with one that's a staggering 4.5-liters in capacity. Also included in the Hennessey toy-chest are stainless steel long tube headers, a high-flow air induction system, upgraded throttle body, upgraded fuel pump and fuel injectors, along with custom engine management calibration. When all is said and done, the HPE1000 Dodge Demon delivers a total of 1,035 horsepower at 6,500 rpm and 948 pound-feet of torque at 4,200 rpm. While the standard Demon accelerates from 0-60 mph in only 2.3 seconds, the Hennessey variant trims this down to only 1.9 seconds. That's quick enough to make a Bugatti Chiron blush. Hennessey hasn't stated what all this will cost, though the company did say production of these devilishly fast Demons will be limited to only 50 examples. Customers also receive a 1-year/12,000-mile warranty, which seems a nice touch for a car that's downright scary with its performance specs. Related Video: Featured Gallery Dodge Demon Hennessey HPE1000 View 30 Photos Aftermarket Dodge Coupe Performance supercharger Hennessey dodge demon quarter mile demon

Cold start comparison: 2020 Alfa Romeo Giulia Quadrifoglio vs. 2013 Dodge Challenger SRT8

The 2020 Alfa Romeo Giulia Quadrifoglio is a five-seat, compact luxury sport sedan packing 505 horsepower thanks to a 2.9-liter twin-turbocharged V6. My personal 2013 Dodge Challenger SRT8 392 is ... well ... not. It's a full-sized muscle coupe whose iron-block 6.4-liter V8 makes 470 hp in the very traditional way: it's freakin' huge, like everything else about the car.  On paper, these two have nothing in common beyond the fact that they were built by the same multi-national manufacturing entity.  But if paper were the be-all and end-all of automotive rankings, everybody would buy the same car. And we don't, especially as enthusiasts. Whether it's looks or tuning or vague "intangibles" or something as simple as the way a car sounds, we often put a priority on the things that trigger our emotions rather than setting out to simply buy whatever the "best" car is at that particular moment.  So, what do these two have in common? They both sound really, really good. Like looks, sounds are subjective. While a rubric most assuredly exists in the world of marketing (attraction is as much a science as any other human response), we have no way of objectively scoring the beauty of either of these cars, and the same applies to the qualities of the sound waves being emitted through their tail pipes.  But we can measure how loud they are. In fact, there's even an app for that. Dozens, as it turns out. So, I picked one at random that recorded peak loudness levels, and set off to conduct an entirely pointless and only vaguely scientific experiment with the two cars that happened to be in my garage at the same time.  For the test, I opened up a window and cracked the garage door (so as not to inflict carbon monoxide poisoning upon myself in the name of discovery), and then placed my phone on a tripod behind the center of each car's trunk lid. I fired each one up and let the app do the rest. I then placed my GoPro on top of the trunk for each test so that I could review the video afterward for any anomalies.  I started with the Challenger. The 6.4-liter Hemi under the hood of this big coupe is essentially the same lump found under the hood of quite a few Ram pickups, and it has the accessories to prove it. Its starter is loud and distinctive. Almost as loud, it turns out, as the exhaust itself. As its loud pew-pew faded behind the V8's barking cold start, we recorded a peak of 83.7 decibels. In the app's judgment, that's roughly the equivalent of a busy street.