2002 Dodge Ram 2500 Laramie on 2040-cars

Auto blog

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.

Dodge Scat Packages add Mopar performance upgrades in three stages

Dodge has revealed what it calls Scat Package Stage Kits that enhance the performance of the Charger and the Challenger equipped with the 5.7-liter V8, and the Dart equipped with the turbocharged 2.4-liter inline four-cylinder engine. The Scat Packs use Mopar performance parts that also can be bought separately. Most of the upgrades increase engine output, but Dodge somehow manages to not specifically mention the power gains associated with each Scat Pack.
The three Scat Packs offered for the V8-powered cars focus on higher power ratings, and each stage comes complete with a unique engine-management calibration to optimize output. Stage one comes with a cold-air intake and a cat-back exhaust; stage two adds a performance camshaft; and stage three really gives you the goods, adding ported polished cylinder heads and performance headers.
For the Dart, the Scat Packs focus on engine, transmission, chassis and brake upgrades. Stage one will net you a cold-air intake, a short-throw shifter and slotted rotors with performance brake pads; stage two adds a cat-back exhaust system and an engine-management calibration to increase output by taking advantage of premium-octane gasoline; and stage three adds 13-inch vented brake discs up front clamped by four-piston calipers, suspension with adjustable springs and struts and performance front and rear antiroll bars.

The Dodge Neon is coming back... to Mexico

It's been a long time since we've seen a new Dodge Neon putt-putting around. But soon it will be back, and in North America, too, if you want to get technical about it. But this time, the Neon will be limited exclusively to Mexico. According to Ward's Auto, FCA is planning to import the Fiat Tipo to Mexico, but rebadged under the Dodge brand and with the Neon nameplate on the trunk... even if it doesn't have those signature round headlights, or a three-speed automatic transmission. Never heard of the Fiat Tipo? It debuted almost a year ago as the Aegea Project, and went into production shortly thereafter – similarly called the Egea in Turkey where it's made, but the Tipo in other European markets. It's a budget-oriented, C-segment compact with a range of four-cylinder engines, and though designed from the get-go as a four-door sedan, it rolled into Geneva last month in hatchback and wagon forms as well. The Tipo is built at the Tofas plant in Bursa, Turkey, alongside the Fiat Doblo – which is also shipped over to North America, rebadged as the Ram ProMaster City. In the Mexican market, FCA also sells the Fiat Siena sedan as the Dodge Vision, the Mitsubishi Mirage rebadged as the Dodge Attitude, and the Fiat Strada as the Ram 700 – all nameplates exclusive to our neighbors to the south. Whatever its origin, it'll be interesting to see a Neon again the next time we venture South of the Border – particularly considering that the Neon was arguably the last time that Chrysler had a competitive compact on its hands. The Caliber that followed never gained the same kind of traction, so to speak, and FCA recently ceased production (for the time being at least) of the Dodge Dart and Chrysler 200 to focus on larger trucks crossovers – the likes of which the Caliber tried to emulate (in style, if not in substance).