2001 Dodge Ram 2500 Cummins Diesel Quad Cab Short Bed 4x4 on 2040-cars

Auto blog

500+ hp Stellantis 'Hurricane' I6 previews a world without Hemis

After years of rumored development, Stellantis has revealed its new six-cylinder engine family. The 3.0-liter, twin-turbocharged "Hurricane" I6 will offer V8 power, forced induction torque and six-cylinder efficiency in a package designed to fit into any of the company's North American rear-wheel-drive platforms.  What is "V8 power," exactly? Well, in standard output guise, the new I6 cranks out more than 400 horsepower (the specific figure will vary by application) and 450 pound-feet of torque, while the high-output variant is good for more than 500 horses and 475 lb-ft. The final figures will be dependent on the application. We'll save you a little legwork: In current Ram, Jeep and Dodge products, the 5.7-liter Hemi tops out at about 395 hp and 410 lb-ft, give or take, and the 6.4-liter around 485 hp and 475 lb-ft.    This is a clean-sheet design that is only related to the company's turbocharged four-cylinder by some common measurements. The I6 is exclusively direct-injection (no hybrid/port-injection here) and the two I6 variants share 96 common parts, including the block and oil pan design. The differences are found in their internals, intake plumbing, valvetrain components and the turbochargers themselves. Stellantis is not yet ready to share specs or supplier info for the turbos but says announcements will come from its partners soon.  The standard-output I6 has a compression ratio of 10.4:1 and revs to 5,800 rpm. It will run on regular fuel, albeit with reduced performance; 91 octane is recommended for maximum output. The high-output variant has a compression ratio of 9.4:1 and will rev to 6,100 rpm. That one will require premium. The new I6's advantages go beyond basic power output. Every Hemi family engine currently in production is based on an iron block design, so they're heavy. The aluminum-block I6 shaves weight off the total engine package, even if some of that gets added back thanks to the turbos and their associated plumbing. The standard-output I6 weighs 430 pounds, Stellantis engineers told us; the high-output adds just another 11. Fully dressed 5.7-liter V8s are in the 550-560-pound ballpark, and 6.4-liters close in on 600 pounds.  You may be wondering, "Why a clean-sheet gasoline engine now, when the industry is moving toward battery-electrics?" A valid inquiry, and one Stellantis was prepared to address. While the company will be pivoting to electrification over the next decade, it won't be instantaneous.

Why the Charger Hellcat can't be ordered with a manual transmission

Fans of truly irreverent amounts of horsepower will find lots to love in the form of the 2015 Dodge Challenger and Charger Hellcat models. Both of them send 707 ridiculous horsepower to the rear wheels; the only question is whether you want your absurdity delivered with two or four doors. Oh, and whether or not you want the option of a manual transmission.
If you prefer rowing your own gears, the choice is made for you; there is no manual gearbox option available on the Charger Hellcat, or any Charger model at all, for that matter. Wonder why? Well, besides the fact that almost nobody - sorry, clutch fans, but it's true - would choose to buy a Charger with a manual transmission, that is? The answer, according to an industry insider in a post written on Jalopnik's Opposite Lock forum, is the floorpan.
It's probably not a surprise to most of our readers that the Dodge Challenger and Charger share a large portion of their chassis structure, which is codenamed LX at Chrysler, but there are still some significant differences under the skin due to the shorter wheelbase and two-door coupe bodyshell of the Challenger, as opposed to the sedan shape of the Charger. One of the differences is the floorpan, the huge chunk of sheetmetal that makes up the floor of the car and props up such essential items as the car's seats.

Ford Police Interceptors dominate Michigan State Police testing

Once again, Ford Motor Company builds the fastest police vehicles. The Blue Oval touted the news in an official release following Michigan State Police and Los Angeles County Sheriff's Department testing. Ford did very well. Except for one acceleration metric – zero to 10 miles per hour – the Blue Oval's Taurus and Explorer-based cop cars were the quickest, with particular praise coming for the EcoBoost-powered models, which bested Chevrolet and Dodge's V8-powered variants. Dearborn's products also posted the fastest average times around MSP's vehicle dynamics course. But it wasn't all positive for Ford. The only four-cylinder in the contest, the 2.0-liter, EcoBoost Ford SSP Sedan, had both the lowest top speed, 120 mph, and the slowest acceleration figures. It was also the slowest in track testing. Ford's products also failed to match the braking and top speeds of its rivals from Detroit and Auburn Hills – the rear-drive Charger Pursuit posted the best braking stats of the entire test, while the V8-powered Chevrolet Caprice hit the highest top speed, at 155 mph. Ford did score a top speed award, among SUVs, but at 132 mph, the naturally aspirated Police Interceptor Utility had to share its award with the equally fast, rear-drive Chevrolet Tahoe. The LA County Sheriff's timing isn't publicly available, but according to Ford, the EcoBoost-powered police cars put on a similarly impressive show for cops on the West Coast. We've assembled a spreadsheet on Google Docs that offers an easy to browse comparison of the different stats assembled by the Michigan State Police, and divided the vehicles between standard V6-powered sedans, high-performance sedans (EcoBoost and V8 models), and SUVs. You can check it out here. Related Video: