1996 4wd Dodge 2500 Ram Pickup Fiberglass Bed Cover Automatic Boss Plow Ready on 2040-cars

Auto blog

Dodge Charger Hellcat makes 1,032 hp with Hennessey help

Sometimes you just want four doors. Earlier this week we brought you Hennessey's riff on the Dodge Challenger Hellcat. Now comes the Charger. Much like its two-door sibling, the Charger gets boosted to as much as 1,032 hp and 987 lb-ft of torque (at the crank) thanks to the addition of a twin-turbocharging setup that works with the factory supercharger. The turbo headers and downpipes are stainless steel, and there is a high-flow air-to-water intercooler and dual-turbo waste gates. Hennessey also beefs up the fuel injectors, fuel pump, and the rest of the fuel system. The engine management system and chassis are recalibrated to accommodate all of this. You also get numbered plaques signed by John Hennessey, the boss of the Texas tuning outfit, and the technician who does your build. Hennessey's additions result in zero-to-60 mph sprints in 2.7 seconds, and the big sedan can run the quarter mile in 9.9 seconds at 142 mph. Like the Challenger, the Charger has the same disclaimer: the lofty horsepower figure comes from an engine dyno, and it will be a 15-to 20-percent lower at the rear wheels. Related Video: Image Credit: Hennessey Performance Dodge Performance Sedan Hennessey dodge charger hellcat

2020 Dodge Charger SRT Hellcat Widebody Daytona 50th Anniversary Edition celebrates an icon

Fifty years ago, Dodge commissioned Creative Industries to build the 1969 Dodge Charger Daytona as a homologation special to satisfy NASCAR rules. The extraterrestrial-looking coupe conquered at the race track, broke records, and frightened any onlooker possessed of a weak constitution; it's claimed that even the carmaker's general manager at the time, Bob McCurry, considered the Charger Daytona the ugliest car he'd ever laid eyes on. Time having worked its magic, Dodge is celebrating the now-iconic Winged Warrior with the 2020 Charger SRT Hellcat Widebody Daytona 50th Anniversary Edition. The new model goes without a nose cone and vertical stabilizers, but it does loose 717 horsepower from its 6.2-liter supercharged V8, which is 10 more than the standard car. The grunty sedan will be available in four colors: Pitch Black, Triple Nickel, White Knuckle, and B5 Blue exclusive to this model. B5 was the original paint code for a Blue Fire Poly hue available on Dodge and Plymouth products built between 1969 and 1972. Evoking the original as well as highlighting the decklid spoiler on the new Charger, the black, nickel, and blue sedans get white "Daytona" decals on the rear quarter panels and a white spoiler, matching white Hellcat badges on the front fenders. White cars get blue "Daytona" decals and spoiler, and Hellcat badges in a bright finish. Twenty-inch Warp Speed wheels finished in Satin Carbon on all-season Pirellis and black Brembo brakes complete the exterior overhaul. Inside, heated and cooled 12-way adjustable performance seats are trimmed in Nappa leather and Alcantara, with blue cross-stitching joining seatbacks embroidered with the word "Daytona." The flat-bottomed, suede-wrapped steering wheel with silver stitching and "velour-bound" floor mats will only come in this model, the festival of special appointments also including the dynamica suede headliner, carbon fiber instrument panel and bezels, light black chrome trim pieces, and blue stitching on the dash, shifter, center console armrest, and door panels. Dodge will only produce 501 units, said to match the number of cars necessary for NASCAR homologation at the time, and each wears a plaque identifying it as "X out of 501." NASCAR rules in 1969 demanded 500 units, actually — the car Dodge built in 1968 to race was called the Charger 500, in fact. Also, Creative Industries built 503 1969 Charger Daytonas for the U.S. and another 40 for Canada, but who's counting?

The Walter P. Chrysler Museum is shutting down permanently this December

It is with disappointment that we report the Walter P. Chrysler Museum in Auburn Hills, MI, will be closed down permanently at the end of this year. The museum, which closed in 2012 after not being able to cover costs, was recently reopened to the public on alternating weekends starting in June, but Chrysler made the decision to shutter it altogether after its final day of operation on December 18, 2016. The reason for this is primarily because FCA needs more office space, and the company decided to convert the museum for that purpose. The the cars will be moved to storage after the closure, and they'll be shown at various events. However, they'll only be able to be seen together for two more weekends. Those weekends include those of November 19 and 20, and December 17 and 18. The museum will be open from 10 am to 4 pm on those days. If you can, we highly recommend visiting the museum. Adults get in for $10, seniors and retired FCA employees for $8, kids between 6 and 17 for $6, and kids under 5 for free. It also has some fantastic cars including concepts from the 1950s to the 2000s, oddball performance vehicles such as the Omni GLH-S, and of course plenty of fascinating history. And if it makes any difference to you, there's even a purple Plymouth Prowler you can sit in. Just make sure you don't wait too long to make up your mind about visiting. Related Video: