07 Ram 2500 (lone-star) 6.7l Cummins 4x4 6-speed 79k Jakes Carfax Serviced Tx !! on 2040-cars

Auto blog

A look at the Dodge Demon's drag settings, modes, and go-fast tech

In the same video that gave us a peek at the 2018 Dodge Challenger SRT Demon's performance stats, there's a serious dump of info on the tech and tools that will likely help this muscle coupe slaughter drag strips. Dodge has outlined a few of them for us and we're using the power of inference to figure out the rest. Here's what we've gathered. A lot of these hints come from the Demon's version of Performance Pages, the infotainment screens that show what SRT models are doing and let the driver change the powertrain and chassis setup. There are a lot of Demon-only features, including line lock, a quick cooldown mode for the supercharged engine, and data recording. And of course there are pages to show a digital time slip with acceleration and braking figures, a g-load plot, and lots of gauges to track temps and levels. The engine output is shown in the video on a special Dyno page. It tracks horsepower and torque over time on the upper graph, and engine rpm and shift points on the lower graph. And we think it's still hiding something. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Any good drag car has a line lock, allowing the driver to lock the front brakes and leave the rears free to do a nice tire-warming (or tire-shredding, depending on length) burnout. Ford has it on the Mustang, Chevy puts it on the ZL1, and now Dodge is adding it to the Demon. It should help get the giant Nitto tires up to temp for a drag run. And once the tires are warm, there's launch control, just like on the SRT Hellcat, with selectable rpm to dial things in for the conditions. The Demon also has a shift light in the cluster, and the driver can set a shift point individually for each gear. After each drag run, you can activate Quick Cooldown, which Dodge says uses the first production application of After-Run Chiller – it runs the cooling fan and intercooler coolant pump with the engine off until the coolant reaches its target temp. It's shown in one of the slides above. The checklist on the left side of that page suggests it requires a set of conditions be met to work: engine off, hood open, and sufficient battery level. This further reinforces our theory that the supercharger is going to make big boost, beyond the Hellcat's 11.6 psi. And while you're waiting for the supercharger to cool off for another run, you can review the performance data the car records.

Are you the Dodge Dart SRT4?

Dodge has just confirmed that it will be bringing its newest Dart variant, the Dart GT, to Detroit next week, but we're still in the dark about when we'll see a truly hotted-up SRT4 version. But now, by way of the rumormill anyway, we've got at least one proposed, potentially Dodge-based rendering to light our way.
Seen here is what would appear to be a design sketch of the SRT4 Dart. Obviously the image that has surfaced is of rather low-resolution, but there's at least some evidence to support that it may be legitimate. In the original picture, one can just make out the name Tim Doyle in the lower right corner. As it turns out, Tim Doyle's name is also watermarked on the final design image for the 2011 Dodge Durango Citadel Black & Tan, a model that was shown at SEMA in 2010.
Of course, even if this really is the work of Doyle, there's nothing to say that this image isn't one of a great many potential looks for the future SRT4. In fact, the departure of the cross-hair grille from the Dodge's nose seems like it could be a hard sell, though we do, naturally, dig the sleek hood scoop and the bulked up wheel/tire combination.

Junkyard Gem: This 1987 Dodge 600 SE Sedan is suspiciously Benz-ish

The K Platform, introduced for the 1981 model year, saved Chrysler from certain bankruptcy. By 1983, a stretched-out K chassis had been developed; the Chrysler version was the E-Class, while Dodge had the 600. These cars have become all but extinct now, so this '87 600 sedan in a Denver-area wrecking yard is a noteworthy Junkyard Gem. Ford explicitly compared the appearance of the late-1970s Granada to that of the Mercedes-Benz W123 in their advertising, and so the ground was broken for Chrysler to make the allusions to Stuttgart machinery even more obvious a few years later. The name of the Chrysler E-Class was about as subtle as a tire iron blow to the kidneys, and the badging on its Dodge 600 sibling left little to the imagination. 600s came from the factory with several variations of the Chrysler 2.2/2.5 engine, as well as the Mitsubishi "Hemi 2.6" four-cylinder. This car has the 2.5 Chrysler engine, rated at 97 horsepower. Base price was $10,553, about $23,500 in 2017 dollars (the cheapest new Mercedes-Benz E-Class cost $38,600 in 1987, so there wasn't much customer overlap between the two cars). The 600s weren't bad cars for the price, though the build quality wasn't quite up to Mercedes-Benz standards. You'll find this thumbtack treatment on most K-Car headliners that still drive today. The interior is all tan and brown, with plenty of tough industro-velour upholstery and not-so-convincing artificial wood. Aluminum-faced home audio equipment was all the rage during the 1980s, and the trend spread to automotive controls. No cassette in this car, but at least it had AM and FM radio (even plain old mono AM radios were still expensive options on many cars as late as 1987, so the standard AM/FM stereo rig in the 600 was an attractive deal). This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. You can't beat the 600!