06 Ram 2500 Cummins Diesel Laramie 4x4 (4 Wheel Drive) on 2040-cars

Auto blog

Chrysler recalling 2009-2010 Ram 1500, Dodge Dakota pickups over axle pinion nut

Chrysler is issuing a recall for the 2009 and 2010 Ram 1500 and Dodge Dakota pickup trucks due to improper installation of the rear axle pinion nut. According to the National Highway Traffic Safety Administration, a total of 44,300 trucks are affected by the recall, and there have been 12 confirmed incidents including one crash.
The issue on both trucks is that the pinion nut is loosening on some trucks due to a lack of thread adhesive, and it is causing the rear axle to lock up resulting in loss of vehicle control. NHTSA's recall notice says that eight incidents occurred at speeds over 35 miles per hour and most also exhibited driveshaft failures as well since the loss of the pinion nut would cause the gear to separate from the driveshaft. In one complaint, the driveshaft separated from the rear axle and punctured the gas tank.
Chrysler will begin sending out recall notices to affected owners in November, but scroll down to see the official NHTSA notice.

Dodge launches 1 of 1 Viper configurator

Get comfortable because you might be spending a good chunk of time in front of the computer on this. The configurator for the 2015 Dodge Viper GTC 1 of 1 is now online, and it's a ton of fun to play around with. Mechanically, the GTC is just like every current Viper with a 645-horsepower, 8.4-liter V10. But for the special editions Dodge lets buyers tinker with practically everything aesthetic thing. For the exterior alone, the choices include some 8,000 available body colors, two stripe styles in innumerable shades, two hood designs and various brake caliper hues. Plus, there are 16 upholstery colors inside, and options like red seat belts and carbon fiber trim. Dodge reckons there are over 25 million possible combinations, and the models are available to customers on a first-come-first serve basis for each model year. Although, two people wanting identical cars seems pretty unlikely. The configurator is a beauty too. It makes all of these myriad options extremely easy to pick from, and there are even four resolution settings to see your creation in the best possible way. Prices for the GTC start at $94,995 and deliveries are set to start in the second quarter of the year. Although, even if you have no intention of buying one, specifying these custom coupes is still highly entertaining.

Dodge reveals a few of the goodies in the Demon crate

One of the teaser trailers for the eagerly anticipated Dodge Challenger Demon featured a big crate full of goodies for the car. As with the car, though, Dodge was a bit coy about what was inside, simply saying there were 18 items, consisting of tools and parts. Now we know what tools the car gets, and they're some very nice Snap-On pieces. All of the tools and accessories are branded with the Demon logo. And the tools included should be perfect for easy tire changes at the track. Specifically, the tools include a hydraulic jack, cordless impact wrench with charger, torque wrench, and a tire pressure gauge. There's also a fender cover to protect the paint when working under the hood, and a nice carrying bag with the Demon emblem on the side. And, naturally, all of the tools are limited-edition units made specifically to accompany the Demon. If you want to do anything more involved than wheel swaps, you'll need to supply a few tools of your own. But this should be good for the weekend drag racer or autocross driver who wants to drive down to the course on street tires, then throw on the sticky rubber at the track. Also, as you may have noted, these tools only constitute six items in Dodge's count, leaving 12 others that must be car parts. We know that among the parts are some factory Demon wheels, and items that Dodge describes as "Direct Connection Performance Parts" and the "Demon Track Pack System." Details on these remain scarce, but they will probably be revealed closer to the car's debut date of April 11. Related Video: