Power Seat Sirius Satellite Radio Lone Star Edition Spray In Bed Liner Cruise on 2040-cars

Auto blog

Chrysler recalling 67k trucks with manual transmissions

Earlier this month, Chrysler announced the recall of some 280,000 pickup trucks over concerns that their axles could seize up. Now the automaker has announced an entirely separate recall of another 66,819 trucks over the springs that could break in the clutch ignition interlock switch. The recall affects Dodge Ram 1500, 2500 and 3500 pickups, as well as the Dodge Dakota and Mitsubishi Raider. The issue is relevant only to those trucks fitted with manual transmissions, from the 2006 and 2007 model years and manufactured between July 1, 2005, and July 31, 2006. Since a broken spring could, according to statements issued by the National Highway Traffic Safety Administration and FCA US LLC (previously known as the Chrysler Group) prevent the vehicle from starting, or cause it to move unintentionally once the ignition kicks over, the automaker will begin notifying owners of the affected vehicles just before Valentine's Day to bring their trucks into their local dealers to have the clutch ignition interlock switch replaced. FCA emphasizes, however, that the unintended movement would only occur "in rare cases" and only "if recommended starting procedures are not followed." Only one such case is known to have occurred, but it did regrettably result in a fatality. Statement: Clutch Ignition Interlock Switch December 29, 2014 , Auburn Hills, Mich. - FCA US LLC is launching a voluntary global recall of an estimated 66,819 older-model pickup trucks equipped with manual transmissions. The Company will replace their clutch ignition interlock switches at no charge to customers. An investigation by FCA US engineers discovered switches in certain model-year 2006 and 2007 pickups may be equipped with spring wire that differs from wire used in previous switches. The alternate wire may break and, as a result, the vehicles may not start. In rare cases, a vehicle may – if recommended starting procedures are not followed – exhibit unintended movement when its ignition key is turned. The Company is aware of one fatality related to this campaign. It stemmed from the single known accident involving this population of vehicles. The recall covers certain Dodge Dakota, Dodge Ram 1500, 2500, 3500 and Mitsubishi Raider pickups. Switches with the alternate wire were not used in any vehicles produced before July of 2005, or after June of 2006. The Dakota and Raider are no longer in production.

2018 Dodge Durango SRT First Drive | Speed, and space for six

We're gathered along with other members of the media at the Indianapolis Motor Speedway to drive a trio of new vehicles from Dodge's performance arm. Alongside a pair of SRT Challengers – the Demon and the Hellcat Widebody – the 2018 Dodge Durango SRT towers over the coupes, and is surprisingly menacing to behold. Its proportions may be relatively simple, but its hood scoop, air vents, and aero features let us know that this car is built for performance. A set of sporty wheels and bright Brembo brakes reiterate its purpose. A badge on the fender bearing the number "392," denoting the V8's displacement in cubic inches, gets us thinking about classic muscle. Even with the Demon sitting feet away, just looking at the Durango has us excited to drive it. Our first stint in the Durango SRT takes place on the infield road course at Indy. We had just gotten out of the Challenger SRT Hellcat Widebody, driving the same circuit, and we expected the Durango to seem tame by comparison. We were mistaken, mostly. The Durango SRT's seating position feels very upright, particularly due to a helmet that kept us from settling into the headrest. Still, we make ourselves comfortable, able to adjust the steering wheel right where we want it. Everything is in Track Mode – transmission, AWD, suspension, and steering – except for stability control, which is still set to Street. Taking off from behind Indy's famous bricks, throttle tip-in is quick, and the Durango SRT springs to life. The Durango feels fast under wide-open throttle in a straight line, which is impressive consider we had just gotten out of a louder, faster coupe. Dodge claims a 0-60 time of just 4.4 seconds, and it's that kind of acceleration that makes us agree with Dodge's boastful claim that the Durango SRT is a "three-row Charger." Then we take the first corner. The steering feels progressive, if not super tight, but the size and weight of the Durango quickly make themselves known. Body roll reminds us that this is, in fact, a tall utility vehicle, and definitely not a Charger. We lean to the side as the tires dig in, pulling the Durango around its axis and toward the apex of the corner despite the lateral momentum they are fighting. We're hesitant, but the instructor in the passenger seat coaches us to keep on the throttle despite what our inner ear is telling us. The Durango manages to stay stuck to our line as we push harder through the corners than we had thought possible.

Dodge Scat Pack for 5.7L Hemi V8 detailed, priced

Dodge revived the Scat Pack name back in November at the 2013 SEMA show. At the time, though, we were short of details on forthcoming upgrade packages, which were destined to add some oomph to the Challenger, Charger and Dart. We're still waiting to hear about the upgrades to the Dart's 2.4-liter four-pot, but Dodge has gone ahead and released the details on the upgrades to the 5.7-liter Hemi V8 in the Challenger and Charger R/T.
As we detailed in our original post, three different Scat Packs will be available that will allow customers to upgrade their cars without voiding the warranties. Starting with the $2,195 Stage 1 kit, owners will net an extra 18 horsepower and 18 pound-feet of torque thanks to a Mopar-branded cold-air intake, exhaust and ECU ref lash. Stage 1 is also the only package that could be installed outside of a Chrysler-authorized service center without voiding the warranty (a mechanically competent owner could even do it at home, we're told by Dodge). Stage 2 builds on the entry level Scat Pack, and adds performance camshaft kit, which boosts output over the stock 5.7 by up to 30 hp for $1,895. As with the Stage 1, the ECU is tweaked.
For those that want to go whole hog, they can add the Stage 3 for $4,995. The top-tier gets quite serious, adding CNC-ported cylinder heads, as well as high-flow headers and cats. Output over stock is 58 hp and 47 lb-ft of torque. Each kit comes with a pair of badges, just in case owners want a bit of visual flair.