Dodge Ram Srt-10, V10, Quad Cab, 22 Wheels, Loaded!! on 2040-cars

Auto blog

2015 Dodge Charger Pursuit prepares to keep Hellcats in line

Earlier today, Dodge pulled the wraps off its 2015 Charger SRT Hellcat - a 707-horsepower sedan capable of sprinting to 60 miles per hour in 3.7 seconds and reaching a top speed of 204 mph. Naturally, the car debuted in a bright shade of pull-me-over red, so it was fitting, then, that Dodge also brought its newly updated 2015 Charger Pursuit to keep everything under control.
No, cops won't be able to spec their Charger cruisers with the 707-hp Hellcat engine (oh man, imagine the chase scenes...), but law enforcement officials will be able to choose from either a 3.6-liter V6 or 5.7-liter Hemi V8, producing 292 hp and 370 hp, respectively. V8 models can be ordered with all-wheel drive, and Dodge estimates that with either engine, the Charger Pursuit can achieve up to 26 miles per gallon on the highway (thanks to the V8's four-cylinder mode).
Other updates for 2015 include improved braking power, a seven-inch display in the instrument cluster, a five-inch display in the center stack, and a new vehicle systems interface that could make it easier for police squads to install computer and radio equipment.

Tempted by the Demon, dealers find way to thwart Dodge, jack up prices

It's the eternal story of short supply, big demand - and car dealers eager to exploit that dynamic, especially when it involves a hot car. A few weeks ago, when Dodge announced that it devised a way to attempt to prevent price-gouging on those 840-horsepower 2018 Dodge Demons, you just knew the dealers would dream up some devilish end-run. And sure enough, despite the manufacturer's best intentions, Demon order slots are being offered with five-figure markups. Here's how things were supposed to work: With a run of just 3,000 cars, Dodge knew it had to do something to address dealer greed, so it announced an allocation system: Cars purchased at or below the $86,090 MSRP would be the first orders filled and delivered. If a dealer sells an allocated Demon for more than sticker, that car goes to the end of the line for production and delivery. Dodge also ensured dealers wouldn't stockpile or hoard Demons by limiting the number of orders a dealer can submit and allocating cars to dealers based on how many Challenger and Charger Hellcats the dealer has sold. But Automotive News reports that some dealers are using intermediaries to auction off their Demon allocations on eBay. Three sellers last week said they were representing dealers in South Carolina, Tennessee and Louisiana, and auctioning off the right to buy a car in one of the priority spots at MSRP. The minimum bid for the right to buy the car at sticker? From $10,000-25,000. And previous transactions on eBay might have run as high as $75,000. So early buyers are definitely paying an upcharge - but it's a thing apart from the bottom line on the order form, where it appears they are paying MSRP. In other words, a scheme that violates the spirit of what FCA tried to do. A source at FCA told Automotive News the automaker was monitoring the practice but could do little to stop it. And the report quoted a Hellcat owner who said his dealership was ignoring Dodge's strictures altogether and offered him a Demon at MSRP plus $60K. But take heart. Not all car dealers are cynically opportunistic - or rather, some see an opportunity for doing good, not making buck. Automotive News says Bill Marsh Chrysler in Traverse City, Mich., plans to sell its single allocated Demon for $1 under MSRP - and is auctioning off the right to buy it, with the dealership's existing customers eligible to bid. The auction's proceeds will benefit four Traverse City charities.

That thing got a Hemi? Mopar engine kits make it easier to say yes

Thanks to a new kit from Mopar, classic car owners will have an easier time dropping Hemis into their muscle cars. The kit works with Mopar's 345 and 392 Hemi engines (5.7 and 6.4 liters respectively) and with cars built before 1975. The kit will run $1,795 and has everything needed to get one of the above engines running. The parts include a power distribution system, engine computer, engine and chassis wiring harnesses, O2 and intake air temperature sensors, ground wiring and a gas pedal. The kit is also designed to work with a manual transmission, but Mopar says a transmission such as the Torqueflite 727 and 904 can be made to work with the system. As for examples of the kit in action, take a look at the Jeep CJ66 and Dodge Challenger Shakedown that Mopar revealed this week at the SEMA show. Mopar also offers a few other parts to help complete the project, including various oil pans to clear subframes, a set of headers, and accessory drives for power steering and air conditioning. All of these parts are extra cost though. You'll also need an engine, and the 345 starts at $6,070, and the 392 runs $9,335. However, if you happen to already have one from 2014 or newer, that will work, too. Muscle car fans are getting more choices for their engine conversions. Chevrolet Performance already sells crate engines with "Connect and Cruise" kits to get its engines working in classic cars. The General also offers it with more engines. However, for people who want to keep a Mopar engine in their classic Chrysler, Dodge, Plymouth, or Jeep, this is a cool new option. Related Video: Featured Gallery Mopar Hemi V8 Engine Swap Kit Image Credit: FCA Aftermarket SEMA Show Chrysler Dodge Performance Classics FCA engine swap SEMA 2016