2008 Dodge Ram 1500 on 2040-cars

Auto blog

Lee Iacocca's very first Dodge Viper RT/10 nets $285,500 at auction

The first 1992 Dodge Viper RT/10 to roll down the assembly line, which was snapped up by Chrysler chief Lee Iacocca, yesterday hammered at the Bonhams auction in Arizona for $285,500, more than double the pre-sale estimate. According to a history of the car published by the auction house, Iacocca, in his introduction of the Viper to the press, pointed to the car on stage and said, "This one right here is mine." That historic Viper, with serial number 001, has never been available on the open market, as Iacocca kept the car from new until he passed away last year. The car has been driven just 6,200 miles and was being sold by his estate. Other Lee Iacocca cars offered at the same sale fared less well. A 1986 Chrysler LeBaron Town & Country convertible — the ultimate expression of Iacocca's company-saving K-cars — with 20,500 miles on it sold for $19,040. That's less than the $20,000 to $25,000 the auction house had estimated the car would bring. A third car from the former auto executive's estate was a customized 2009 Ford Mustang. The pony car was one of a limited run of 45 Iacocca-branded custom Mustangs, which were reworked by Metalcrafters and sold by Galpin Ford in Los Angeles. The Iacocca Mustang, never titled and with 220 miles on it, hammered for $49,280. Related Video:     Featured Gallery Lee Iacocca's 1992 Dodge Viper RT/10 View 13 Photos Celebrities Chrysler Dodge Auctions Automotive History

2018 Dodge Challenger SRT Demon First Drive | Don’t fear the Demon

"If you're not hurt, we'll be really pissed. If you are hurt, we'll still be pissed, but not quite as pissed." These are the words from Jim Wilder, the vehicle development manager of the 2018 Dodge Challenger SRT Demon, that echo through our head as we slide behind the wheel of the car for the first time. He was warning us about driving beyond our abilities, and keeping the car out of the wall. With 840 horsepower and 770 pound-feet of torque on tap from its supercharged, 6.7-liter V8, the Demon does 0-60 miles per hour in 2.3 seconds, and 0-30 mph in a second flat. If something does go wrong, it'll happen quickly. Following that talk, we had our guts sloshed as a passenger in a blurry eighth-mile run, giving us a taste of the G forces (the Demon can pull 1.8 G in a straight line) we'd feel when we got in the driver's seat for our own pass down the drag strip. We're already sweating. It had rained - you could describe it as torrential - the day before. The grassy parking areas surrounding Lucas Oil Raceway were still flooded, but any water on the pavement had evaporated and hung in the air. Combined with the heat, we were sticky and uncomfortable. In Drag Mode, the Dodge Demon's air conditioning turns off. Any condensation that it could leave on the track would be a problem, plus we need to reduce parasitic power losses for a faster run. The system is still working, though, the refrigerant diverted to the chiller system cooling the air coming into the engine. There's still condensation, but the Demon collects it on a catch pad to keep it from ending up on the pavement. We're also required to roll the windows up when entering the drag strip. For one thing, it helps keep the smoke out of the cabin during the pre-staging burnout. So, yeah, it's hot as Hell in the Demon. We pull through the water box and run through the sequence – which involves holding the "OK" button on the steering wheel usually used to navigate menus, and applying a specific amount of brake pressure before getting on the throttle to initiate the burnout. This gets any crud off the rear tires and heats up the rubber. There are multiple ways to launch the Demon. We had an instructor sitting in the passenger seat as we pulled up to the beams that trigger the Christmas tree at Lucas Oil Raceway. He walks us through the most complicated of the three he had explained to us just minutes before when we were in the passenger seat.

Somebody created a Dodge Challenger SRT Demon droptop

The Dodge Challenger SRT Demon is a vehicle built with one purpose in mind: going fast down a drag strip. Weight is the enemy when it comes to acceleration, and one surefire way to add weight to a car is to make it into a convertible. However, that’s exactly what one Demon owner decided to do to their Challenger. Motor Authority spotted this Plum Crazy Demon convertible conversion for sale online, and the dealer and builder even spilled a few details on the car itself. This particular conversion was done by Droptop Customs, a shop with experience, having previously converted a couple Challengers into convertibles for Shaq in Miami. However, ripping the roof off the 840-horsepower Demon is no small task. ThatÂ’s a ridiculous amount of horsepower to handle for a car that has lost a fair amount of structural rigidity from removing the roof. The Droptop Customs sales manager told MA about the changes that were made to make this build work. To begin, the frame rails were reinforced with 1x2-inch pieces of metal. Then, the shop added diagonally-mounted metal braces underneath to resist twist. Even more structural supports were added to the trunk, front and rear shock towers, and gussets were added to the bottom of each door to keep them from moving. Lastly, the shop boxed the connection of the front rails to the engine cradle. No specifics about weight gain were provided. There is one sad bit of news about this Demon, though. The dealer told MA that itÂ’s currently on consignment, despite being listed for sale on FCA dealership Cape CoralÂ’s website. ItÂ’s priced at an eye-watering $145,995. But the new owner wonÂ’t have to manually put down the top! ThatÂ’s right, itÂ’s powered, and itÂ’s supposed to take about 20 seconds to lower or raise into place while stationary. Somehow, the car has only 172 miles on it, so itÂ’s hardly been used. We have no photos with the top up, so youÂ’ll have to settle for top-down photos for now. It looks like a professional job through and through, and we actually dig the convertible look. Plus, who doesnÂ’t love Plum Crazy?