2007 Dodge Ram 1500 Quad Cab 4x4 Slt on 2040-cars

Auto blog

Texas cops pull armed suspect from burning car

A high-speed chase through Fort Worth, Texas ended in dramatic fashion earlier this month when FWPD pulled armed burglary suspects from the burning wreckage of their escape vehicle. According to NBC DFW, Fort Worth police were dispatched to Avington Way on the evening of July 16 to investigate reports of a burglary. The burglary victim told police he had arrived home to find three individuals hauling his property out of his house. When he approached them, one of the suspects pointed a handgun at him and told him to stay back. Then all three suspects climbed into a silver Dodge Avenger and sped away. FWPD officers spotted the Avenger a short time later on Sycamore School Road and, after the car refused to pull over, the chase was on. Police chased the burglary suspects through the city at speeds approaching 100 mph until the Avenger blew a red light and was t-boned by an oncoming pickup at the intersection of California Parkway and James Avenue. As the pursuing officers closed in on the disabled car, it suddenly caught fire. One suspect bailed out and ran for it, but the remaining two were trapped inside with the flames quickly mounting. Despite the spreading fire and the threat of armed suspects in the vehicle, police officers rushed to pull the men from the wreck. The driver was removed easily, but the passenger was unconscious and trapped behind a crushed passenger door. The scene was caught on the officers' body cameras as they pried the door open with their bare hands. Eventually the officers got the semi-conscious man out of the passenger seat just as the car was completely engulfed in flames. "It was pretty dramatic. We recruit people that can think on the fly, think quickly, and perform under pressure," FWPD Sergeant Marc Povero told WFAA. All three suspects are facing charges for burglary, and the driver was charged with evading arrest. News Source: WFAA, NBC DFW Auto News Chevrolet Dodge Driving Safety Truck Police/Emergency Sedan fire car fire burglary

Chrysler recalls AWD 300, Charger, Ram 1500 over ZF transmission

What do the Chrysler 300, Dodge Charger and Ram 1500 all have in common? Yes, they're all Chrysler products, and two of them are based on the same platform. And we're sure you could find more similarities between them all, but the common trait we're looking at here is that, while they all come standard in rear-drive form, they're also available with all-wheel drive. And it's the transmission in those models that's the subject of the latest recall notice issued by the National Highway Traffic Safety Administration.
The output shaft on the eight-speed automatic transmission supplied by ZF to Chrysler for the AWD versions of the 300, Charger and Ram 1500 is apparently prone to fracture. That in the end could leave the vehicle without power and could, according to the NHTSA investigation, increase the chance of a crash. The vehicle could also roll away if even if left in Park without the handbrake applied.
That's why Chrysler is calling in 4,194 examples of those three models from the 2013 model year. Dealers will be responsible for inspecting the transmissions and, where necessary, replace the entire unit. See the full recall notice below for all the details.

We're pretty sure the Challenger SRT Demon won't have 1,121 horsepower, but what if?

Dodge's slow rollout of the upcoming Demon continues, and with it comes endless speculation about what it all means. Every video, every image, and every press release contains some clue that points towards the Demon's final specs. We don't think any of it is random or arbitrary. This week cryptic image, a small plate with a name and two numbers, shows us a little more than last week's license plate. Unfortunately, Dodge will neither confirm or deny anything, meaning we have no way of knowing which rabbit hole to go down. Don't expect to see official horsepower, a quarter-mile time, or an MSRP until the New York Auto Show. The plate is attached to the crate of goodies that comes along with every Dodge Demon. This particular one is labeled with three things: Tom Coddington, serial number 0757, and VIN 001121. The name is simple enough. According to Hot Rod, Coddington was one of the original Ramchargers, a group of engineers in the early 1960s that helped Dodge get involved in drag racing. He was a fuel system specialist, motor consultant, and a rotating garage manager. All of that could be clues. While a name is easy enough to Google, the two numbers can't be broken down so easily. The crazier theory is that the car makes 1,121 horsepower and will do the quarter-mile in 7.57 seconds. Frankly, those numbers are about as likely as the Demon actually being powered by a Rolls-Royce turbofan engine from a Boeing 757 or packing a carburetor with 1,121 CFM. The Demon is going to be street legal, and the costs associated with making a 1,121-hp car meet emissions standards alone are assuredly astronomical. As our friends from Road & Track pointed out, the more likely theory is that 757 is actually the horsepower rating. This seems totally plausible, but it means we still don't know what 1,121 means. Surely it's not a drag strip time, as the standard Hellcat will do 1/4 mile in 11.2 seconds. Like before, if you have any ideas, post them in the comments. Until April, we'll keep trying to solve Dodge's demonic puzzle. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. News Source: Road & Track, Hot RodImage Credit: FCA New York Auto Show Dodge Coupe Performance dodge demon dodge hellcat