2006 Dodge Ram 1500 Slt 4dr Crew Cab 4x4 5.7l V8 Florida Truck on 2040-cars

Auto blog

Awesomely '80s time-capsule Dodge Daytona Turbo on Bring a Trailer

From the humble K-car, Chrysler in the 1980s was able to spin out all manner of variants, including some fairly credible (for the time) performance machines. One of the most ambitious was the Dodge Daytona Turbo, and a rarely seen example in near-new condition is selling today on Bring a Trailer. [UPDATE: The car was bid to $9,300 but failed to meet reserve. It is now for sale on the dealer's website with an asking price of $19,900.] The Daytona Turbo featured a 2.2-liter four to which was bolted a Garrett To3 turbocharger, bringing output to 143 horses and 160 pound-feet. Naturally, it's paired with a five-speed stick. And dig that black-and-white checkerboard cloth interior, with four bucket seats. The story is that the car was purchased new in Kansas, and that after driving it for two years, the original owner put his prized Daytona up on jack stands and stored it in a climate-controlled garage. This Dodge now has just over 5,000 miles on the clock. If all of the above sounds enticing, you'll be powerless to resist after watching the launch commercial for the Daytona. BaT commenter "Himselvis" posted a link to the 2-minute cinematic masterpiece, which is equal parts "Blade Runner" and Michael Jackson's "Thriller." Some heavy-duty talent was brought to bear on the project, as he recounts: "The director, Bill Butler, was the cinematographer on 'Jaws,' 'Deliverance,' 'Grease,' and 'One Flew Over the Cuckoo’s Nest.' Production designer Jim Spencer had worked on 'Gremlins,' 'Poltergeist,' and 'Stripes.' Director of photography David Watkin shot 'Out of Africa,' the BeatlesÂ’ 'HELP!' and 'Chariots of Fire.' The voiceover was provided by Billy Dee Williams." And the actor was from "Hot Dog the Movie." But the real star is the car, of course. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

2020 Dodge Challenger Drag Pak comes solely with supercharged power

The Dodge Challenger Drag Pak has returned for 2020, five years after the last one arrived, and two years after it began development. And while in many ways it looks like past Drag Paks, there are a number of tweaks that should make this the fastest and most capable factory drag car yet from Mopar. Unlike the last model, only a supercharged 354-cubic-inch (5.8-liter for the imperically challenged) V8 is available. Mopar says it's more powerful than its predecessor, though exact horsepower wasn't given. It did confirm that the previous car was capable of a stunning 1,200 horsepower. The engine is coupled solely to a three-speed automatic transmission with a manual shifter. 2020 Dodge Challenger Drag Pak View 17 Photos Supporting the massive engine are many chassis, suspension and driveline enhancements. The independent rear suspension and axles are gone in favor of a solid axle from Strange and a four-link suspension. The front remains stock except for double-adjustable Bilstein shocks. The engine is mounted to a subframe member that's beneficial both to weight distribution and center of gravity. The car gets high-performance brakes and custom Weld Racing wheels with "DRAGPAK" engraved on them. The interior features a welded-in roll cage certified for quarter-mile times as quick as 7.5 seconds. Helping keep the car planted without increasing drag too much are front and rear spoilers from the road-going Challenger, a new addition compared with the previous car. Every Drag Pak car also comes standard with a wheelie bar and parachute. Dodge will only build 50 of these cars, and they'll only be offered as race cars that aren't legal for the street. The cars will be eligible for competing in sportsman classes in NHRA and NMCA drag racing series. Pricing and availability hasn't been set yet, but will be revealed sometime next year.

How to tune a car right: Part 3, tuning Mopar with OST Dyno

Not long ago, I wrote a story about a pony car tuned with a supercharger. The blower install had been done properly. Then the car's owner bolted on a set of great looking wheels wrapped in good looking but inexpensive rubber. On my first test drive, I couldn't get any of that supercharged sweetness to the ground. It was the perfect ride for parking in a Burger King parking lot on a Friday night. I tooled around on a Sunday drive, shaking my head that someone had spent five figures to get more power the right way, with a clean install, then wiped out the gains so thoroughly that the stock engine would likely have overwhelmed the tires. This got me thinking about the ways people ruin their quest for horsepower, either on the front end by not insisting on a clean install and paying the money for it, or on the back end with supplemental purchases like cheap tires or cheap gas. So I called three tuners, one focused on GM, one on Mopar, one on Ford, to find out what people should know about how to get the best power for their goals, and how to make sure they are able to use all that power. The first interview in this three-part series was with Blake Leonard at Top Speed Cincy in Cincinnati, Ohio, the second with Brandon Alsept at BA Motorsports in Milford, Ohio. This third and last interview is with Micah Doban at OST Dyno in Slippery Rock, Pennsylvania, a family business with more than 40 years of Mopar expertise specializing in Gen III Hemis, but tuning everything from land-speed cars and drag racers to Jeeps The interview has been edited for clarity and concision. Do people who come to OST generally know what they want? Probably 80% of the people who come in simply want more power with no particular ET goal [ET is a kind of bracket handicapped drag racing – ed.]. WhatÂ’s the best way to start a Mopar tune? The first thing is what people often skip, and that's to find a tuner or a shop. People will throw parts on their cars that the Internet said to, then go to a tuner who does things a different way, and [the tuner is] like ‘No we don't like to use these injectors, we don't like these parts.Â’ You have to find someone familiar with the parts that are on your car or that you're planning to put on your car. So having a goal and then finding a tuner who can help you with that goal is proper way to start. Exactly. And a lot of tuners have their own formula – and when I say tuner I mean someone that also does work to the cars.