2002 Dodge Ram 1500 Slt, 4 Door Crew Cab, 4 Wheel Drive on 2040-cars

Auto blog

Fiat Chrysler recalls 650,000 Dodge, Jeep SUVs for brake issue

Fiat Chrysler Automobiles said Tuesday it's voluntarily recalling nearly 650,000 Jeep Grand Cherokee and Dodge Durango SUVs to ensure that brake-booster shields were properly installed. The recall affects mostly vehicles sold in the U.S. but also roughly 60,000 combined in Canada and Mexico. The shields were installed in 2014 in conjunction with a recall involving the same set of vehicles, which cover the model years 2011 through 2014. A review of warranty data led to an FCA U.S. investigation that discovered the problem. FCA says it is aware of one potentially related accident, but no injuries. The shields are designed to keep water away from the boosters, lest it cause corrosion or freeze in cold temperatures and negatively affect brake performance. Brakes will still function even if boosters are compromised by water, FCA says, but drivers may experience brake-pedal firmness. In some cases, a potential booster issue may trigger a warning light or activation of the anti-lock brakes. Customers who've observed any of those conditions are urged to contact their dealers. The automaker says it plans to notify affected owners that free service to check and repair the issue if necessary will be available in early November. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Recalls Dodge Jeep Safety SUV FCA

Dodge Charger R/T NHRA Funny Car is ready to burn rubber at SEMA [w/video]

The Dodge Charger R/T is all set to rocket down the drag strip in NHRA Funny Car competition with a completely redesigned body debuting at this year's SEMA Show. While only the front decal, side scallops and rear logo really signal this racer as a Charger, that doesn't take away from its promise of hitting absolutely ludicrous speeds.
The engineers' biggest tweak to the body was moving the cockpit further back. This created more clearance under the hood, and the change came with added advantage of giving the driver better visibility out of the car. Composites like Kevlar also helped make the one-piece shell even lighter, while not sacrificing strength.
The new design has already undergone extensive time in the wind tunnel and real-world runs to make sure that none of the changes negatively impacted the aerodynamics. With those tests out of the way, the Charger R/T Funny Car will have the first chance to truly prove itself in NHRA competition at the 2015 Winternationals from February 5-9 at Auto Club Raceway in Pomona, CA.

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat