1996 Dodge Ram 1500 V8 Lifted 35's Truck on 2040-cars

Auto blog

NHTSA closes investigation on 4.7M FCA power modules, no recall

FCA US hasn't had the best time with recalls as of late. Not only did the company recently agree to greater safety oversight and paid $105 million to the government, that came just days after hacking fears prompted a 1.4-million model recall campaign. However, a recent decision to close an investigation by the National Highway Traffic Safety Administration means that the automaker doesn't have to worry about another major recall possibly affecting 4.7 million vehicles, according to the agency's report (as a PDF). Last September, the Center for Auto Safety petitioned NHTSA to investigate an alleged problem with the totally integrated power module (TIPM) on these FCA US models. The group claimed that a fault with the component could cause a variety of maladies, including stalls, not starting, catching fire, unintended acceleration, and airbag non-deployment. At the time, it also submitted 70 cases where this had reportedly happened. According to NHTSA, "no valid evidence was presented in support of claims related to airbag non-deployment, unintended acceleration, or fire resulting from TIPM faults and these claims were found to be wholly without merit based on review of the field data and design of the relevant systems and components." The agency did find signs of an issue with the fuel pump relay in some Jeep Grand Cherokees and Dodge Durangos, but FCA US issued recalls for the problem in September 2014 and February 2015. Without anything else to go on, the Feds don't think it's worth investigating this topic any more.

Mopar teases a big Hemi crate engine for SEMA

Mopar has released a new video teaser hinting at the release of a large and powerful crate Hemi engine at SEMA later this month in Las Vegas. The video functions like a lesson on symbolism in an English lit class. It opens with smoke and settles on a pair of backlit, large-clawed paw prints that look to be feline in origin. Then we hear earth-shaking pounding sounds of something larger than the paw prints that stomps over them. Then cue an overhead shot of what looks to be a vintage-model Dodge Charger and its growly Hemi engine entering the frame and then gunning the engine. Mopar already offers three crate Hemi V8 engines, topped by the 6.2-liter supercharged Hellcat, good for 707 horsepower and 650 pound-feet of torque, found in the Dodge Charger SRT Hellcat and marketed for pre-1976 classic muscle cars. So promising that "Something big is coming" is really saying something. Could it be a crate version of the 808-hp Hemi 6.2 that was found in the Dodge Demon, which was rated at 840 hp on racing fuel? Or is it something different? Curiously, Mopar says its reveal is planned for Tuesday, Oct. 30 at the odd time of 4:26 p.m. Could that time be a reference to the 426 Hemi — and specifically the Generation III 426 Hemi "Elephant" that Chrysler made several years ago? That technically qualifies as "bigger," and it would also align with both the muscle car-era Charger and round, earth-shaking footprints shown in the video. Time will prove whether we were right. Related Video: Image Credit: Mopar SEMA Show Chrysler Dodge Performance Classics dodge demon dodge charger srt hellcat

Dodge revives Challenger T/A and Charger Daytona trims for 2017

Dodge is reviving the Challenger's T/A trim and the Charger's Daytona line for 2017. Introduced on iconic Woodward Avenue just days before the annual Woodward Dream Cruise kicks off, the new variants promise more performance hardware and sportier aesthetics. We'll start with the two-door. The Challenger T/A, available with either the R/T trim's 5.7-liter V8 or the fire-breathing 6.4-liter Hemi V8, is inspired by the Challenger T/As of old. That means a less restrictive, 2.75-inch active exhaust system and a conical Mopar air filter. But there's no clear bump in output – Dodge still lists the base 5.7-liter at 375 horsepower and the 6.4-liter model at 485 hp. But hey, they're going to look cooler. Unlike the Challenger Hellcat, which should have it as standard, Dodge is including a Satin Black hood on every Challenger T/A. In fact, Satin Black is a recurring theme on this Challenger's front fascia, roof, rear decklid, and T/A bodyside stripes. And yes, the 20-inch Mopar wheels are black, too – they're also an inch wider than normal. Dodge is offering the T/A in three different trims. The base T/A has everything we described above, while the T/A Plus adds some comfort features like heated and vented Nappa leather seats, an 8.4-inch UConnect system with Apple CarPlay/Android Auto, a six-speaker stereo, and a shortcut button for the Dodge Performance Pages. The T/A 392, meanwhile, adds the 6.4-liter V8, even wider wheels, and Brembo six-pot calipers. If you prefer smoking tires with four doors, there's the new Charger Daytona. No, there's not an enormous wing on the back. But Dodge added the same kind of engine/exhaust upgrades found on the T/A while upping the top speed from 135 to 150 miles per hour. Satin Black features prominently again, with hood and rear fender graphics. The roof is also black. Unlike the Challenger, Dodge is only offering two different versions of the Daytona – the 5.7-liter base model and the 6.4-liter version, called the Daytona 392. Prices for the Challenger T/A start at $38,485, including a $1,095-destination charge, while the T/A Plus adds $2,750. Adding the 392 means shelling out $45,090. For the Daytona, you'll need a check for $40,985 for the 5.7-liter or $46,090 for the 6.4-liter. Orders for the Charger Daytona open in September, while the T/A is a month later. Related Video: