1983 Dodge D150, 2wd Short Bed, 6 Cyl, Automatic, Only 72,000 Miles (no Rust) on 2040-cars

Auto blog

2019 Dodge Charger SRT Hellcat gets some Demon goodies

The 2019 Dodge Charger SRT Hellcat has been revealed, along with details on the rest of the range. Though the new Charger doesn't look a whole lot different, there are a number of special upgrades, especially for the Hellcat. The least interesting changes are on the outside. The Hellcat and the R/T Scat Pack get a new grille with twin air intakes next to the headlights. The regular RT and GT get some sportier additions such as a hood scoop, rear spoiler, and some other revised body work. The Hellcat also now gets a matte black hood option, as seen on the gray car above. Under the skin are more interesting upgrades. The Hellcat raids the Demon parts bin for its "After-Run Chiller" that continues providing cooling to the intercooler after the engine has been shut off. This way you'll still get cool air for another run when you come back and fire it back up. The Charger Hellcat also gets the Demon's fancy "Torque Reserve" system to start generating boost right at launch. Both the Hellcat and the R/T Scat Pack also come with line lock for big smoky burnouts and "Launch Assist" for minimizing wheel hop and maximizing grip. Both cars have the same power and torque as last year's iterations, though. Dodge hasn't left out its lower-rung Charger models, either. The R/T now gets standard performance suspension and shift paddles, along with a 2.62 rear axle. The GT model is now available in rear-wheel drive, and it's being marketed as more of a performance-oriented trim for the V6. As such, it also gets the performance suspension as standard, a 3.07 rear end and shift paddles. The SXT rounds out the base of the lineup and now has an all-wheel-drive option. Output remains the same with these vehicles, and the GT continues to make 300 horsepower and 264 pound-feet of torque while the SXT makes 292 horsepower and 260 pound-feet. 2019 Dodge Chargers will start showing up on dealer lots in the third quarter of this year. If you're really eager to get one, dealers will be able to start ordering them by the end of June. Pricing hasn't been announced yet for the big sedan. Related Video:

Dodge Hornet supposedly snapped inside Alfa Romeo Tonale factory

It appears that someone in Stellantis' Pomigliano d’Arco Assembly Plant in Italy couldn't keep their cellphone to themselves. Video uploaded to the Alfa Romeo Club Italia Facebook page, then quickly removed, purports to show Dodge's brand-engineered version of the Alfa Romeo Tonale in the same factory where the Alfa will be built. The Dodge is expected to be called the Hornet, and there are a few differences between it and and Alfa Romeo, which is understandable. But if the screenshots on Twitter are accurate, then the Dodge looks a lot closer to the Alfa Romeo than perhaps anyone expected. The front fascia and hood fall in line with Dodge's design language. The Alfa grille is replaced by a narrow, stepped upper grille, and the hood is one of the vented units similar to those available for Dodge's R/T performance trims. And as Mopar Insiders noticed, the silhouette of this car's front end matches a vehicle silhouette Dodge showed during Stellantis' 2021 EV Day.   Inside, the Italian brand's crest in the steering wheel center cap is replaced by Dodge's twin slashes, and the steering wheel has been stripped of the large, curved paddle shifters the Tonale showed on its debut. There's still a start/stop button on the steering wheel, but where the Tonale has a driving mode dial on its dash, this supposed Hornet has another start/stop button. Dodge's push-to-start buttons are usually on the instrument panel, so our guess is that the wheel is a holdover for testing. On the center tunnel, the parking alert buttons and Italian Tricolore flag on the Alfa Romeo are replaced by three different buttons.   We've known Dodge has two electrified vehicles on the way, and the Hornet name has been low-key buzzing for two years. Fiat Chrysler applied to trademark the name in the U.S. in March 2020; at the time, it was thought a vehicle with that name could replace the Journey. In 2021, a July rumor out of Italy was the first whisper of the Hornet name being attached to the Alfa Romeo Tonale. In August, when Stellantis CEO Carlos Tavares said Dodge would get a PHEV in 2024, watchers pegged that model as the Hornet. That hybrid powertrain would show a year after the vehicle's launch, the Hornet anticipated as a 2023 model with the Tonale's turbocharged 2.0-liter four-cylinder. That engine could get the same 256 horsepower and 295 pound-feet of torque as the Tonale, or be boosted to satisfy Dodge's performance credentials.

Dodge Scat Pack for 5.7L Hemi V8 detailed, priced

Dodge revived the Scat Pack name back in November at the 2013 SEMA show. At the time, though, we were short of details on forthcoming upgrade packages, which were destined to add some oomph to the Challenger, Charger and Dart. We're still waiting to hear about the upgrades to the Dart's 2.4-liter four-pot, but Dodge has gone ahead and released the details on the upgrades to the 5.7-liter Hemi V8 in the Challenger and Charger R/T.
As we detailed in our original post, three different Scat Packs will be available that will allow customers to upgrade their cars without voiding the warranties. Starting with the $2,195 Stage 1 kit, owners will net an extra 18 horsepower and 18 pound-feet of torque thanks to a Mopar-branded cold-air intake, exhaust and ECU ref lash. Stage 1 is also the only package that could be installed outside of a Chrysler-authorized service center without voiding the warranty (a mechanically competent owner could even do it at home, we're told by Dodge). Stage 2 builds on the entry level Scat Pack, and adds performance camshaft kit, which boosts output over the stock 5.7 by up to 30 hp for $1,895. As with the Stage 1, the ECU is tweaked.
For those that want to go whole hog, they can add the Stage 3 for $4,995. The top-tier gets quite serious, adding CNC-ported cylinder heads, as well as high-flow headers and cats. Output over stock is 58 hp and 47 lb-ft of torque. Each kit comes with a pair of badges, just in case owners want a bit of visual flair.