05 Dodge Ram Srt-10 Viper Powered Air Suspension Low Miles on 2040-cars

Auto blog

Chrysler recalls 350k vehicles over ignition switches

Chrysler has announced a recall covering 349,442 vehicles due to ignition switches that can either become stuck or move without warning. All of the affected vehicles are from the 2008 model year, and were built before May 12, 2008.
The automaker has learned that ignition keys on some vehicles "may not fully return to the 'ON' position after rotation to the 'START' position during engine-startup," the company said in a statement. Additionally, "an ignition key may not fully return to the 'ON' position after rotation to the 'START' position and may inadvertently move through the 'ON' position to 'ACCESSORY' or 'OFF.'"
Chrysler says it is unaware of any related injuries, and notes that while reduced braking, engine or steering power is possible in such instances, the airbags are not affected. The later stands in contrast to General Motors' recent rash of high-profile recalls, and it's an important distinction that Chrysler (understandably) felt necessary to call out in bold print in its press release.

The Dodge Neon is alive!

"Holy crap! It's a new Dodge Neon! Like a new new one." Oddly, no one else on the Cancun resort shuttle seemed to notice. Or care. Ogling Mexican-market compact sedans is apparently something exclusive to automotive journalists on vacation. Yet there it was, fittingly on Dio de los Muertos, in all its resurrected glory. With a margarita in hand and an ocean in front of me, ignored, I turned my attention to my phone to get to the bottom of Neon version 3.0. Introduced for 2016, today's Dodge Neon is based upon and built alongside the Fiat Tipo/Egea, a C segment compact sedan co-developed by Fiat and Turkish industrial outfit Koc Holding. More than 125,000 were sold last year in Europe, with another 47,000 in Turkey. It's also sold in the Middle East and Africa, with Mexico alone getting the Neon version. Exterior styling is really the only difference, and then, only the crosshair grille manages to identify it as a Dodge. Then again, the same could be said for the not-so-dearly departed Dart, which belonged to the same segment. It was much bigger, though, with an extra 6 inches of overall length and 3 inches of wheelbase (which, as I just discovered, is "distancia entre ejes" en espanol). The Neon interior, not surprisingly, is pretty much the same as its Fiat siblings. The dash has two variations. A bigger, upgrade touchscreen resides in a dash-mounted, tablet-style infotainment pod, but the standard stereo head unit or 5-inch touchscreen upgrade fits into a binnacle shared with the instrument panel. It's a bit more like the Challenger, Charger, and yes, Dart in this regard, but in total, the Neon's cabin design is also less blocky and more organic in appearance. The switchgear is pure Fiat, but the steering wheel has the same control layout as Dodges, Jeeps and Chryslers. Power comes from the Challenger Scat Pack's 6.4-liter Hemi V8. No, it doesn't, I totally got you. The standard engine, dubbed FIRE, is a 1.4-liter naturally aspirated four-cylinder good for 95 horsepower and 94 pound-feet of torque. So, less than the Scat Pack. The optional engine, dubbed E.TorQ, which is in no way related to the Ram's eTorque mild hybrid system and not especially eTorquey, is a 1.6-liter naturally aspirated four-cylinder good for 110 hp and 112 lb-ft. Sadly, the Neon color selection is in no way neon, which probably doesn't matter since virtually every car on the Yucatan peninsula is painted white.

SpeedKore carbon-fiber 1970 Dodge Charger packs a 996-hp Demon engine

SpeedKore Performance does some pretty neat things with carbon fiber. SEMA is always the place to show off new and interesting builds, and SpeedKore has a few new offerings on display. We talked about the lightweight carbon fiber 2018 Dodge Demon late last week, but now that SEMA 2018 is in full swing, we've got a look at something even cooler, an all-carbon, Demon-powered 1970 Dodge Charger "Evolution." SpeedKore Performance is based in Wisconsin and has been churning out SEMA showstoppers for years. In addition to the Demon, take a look at this Shelby GT350R the shop modified a few years back. The Charger Evolution is named so because it further modifies the SpeedKore Charger "Tantrum" that was used in the " Fast and Furious" films. That car used a carbon composite body and was fitted with a 9.0-liter Mercury Racing twin-turbo engine making an absurd 1,650 horsepower. The Evolution might be down on power — only 996 horses thanks to a modified Demon crate engine — but the goal was to create something a little more usable than the Tantrum. Upgrades include a smaller supercharger pulley, larger fuel injectors, a custom cold-air intake, stainless steel headers and a custom exhaust with SLP mufflers. There's also a Dailey Engineering dry sump, upgraded oil cooler, and Saldana radiator. It's also lighter, thanks to even more carbon fiber. SpeedKore had a goal to get the '70 Charger to about 3,200 pounds. To get there, the Evolution employs carbon-fiber bodywork, an aluminum floor, a steel roll cage and a new 2x3-inch steel box frame. SpeedKore's autoclave is large enough to bake a one-piece roof, hood and quarter panels. The bare bodywork has been finished with a clear coat to help prevent fading. The Evolution uses billet aluminum for the door handles, fuel cap and grille, all finished in a bronze-nickel coating to pair with the HRE wheels. In addition to the floor, aluminum was used for the firewall, transmission tunnel and radiator shroud. To slow the Charger down, it uses Brembo brakes with six-piston calipers up front and four-piston calipers in the rear. The suspension uses Penske adjustable coilovers while Michelin Pilot Sport 2 tires wrap 19x10-inch front wheels and 20x12-inch rear wheels. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.