1966 Dodge Polara 500 on 2040-cars

Auto blog

1972 Dodge Challenger on an M1009 CUCV military frame is YES

The subject of this post is cause for celebration, not reason to ask "But why?" We don't know why this random Craigslist seller chose to marry the body of a 1972 Dodge Challenger with the frame and axles from a 1987 Chevrolet M1009 military vehicle. We're here to appreciate it, thanks to The Drive, and maybe spend some time after dinner considering whether to buy it. Now that we're on the same page, an owner in Tucson wants to rid his garage — or his Bullet Farm — of what appears to be an exceptionally well built conversion. Starting from the bottom, the M1009 CUCV, for Commercial Utility Cargo Vehicle or "Cuckvee," emerged from a program turning K5 Blazers into supply rigs that were meant to support hardcore hardware like the AM General Humvee. The M1009 got GM's 6.2-liter Detroit Diesel V8, a TH400 transmission, an NP-208 chain-driven transfer case, a 10-bolt rear axle and 3.08 gears. Produced from 1983 to 1987, they returned "less than desirable" results in the field and the military unloaded them. Not much of that remains for this build. The diesel got dropped, replaced by a 5.7-liter GM gasser with a four-barrel carb and long-tube headers, shifting though a 4L80E automatic transmission attached to a U.S. Shift Quick 1 transmission controller in the cabin. The seller doesn't mention output, but if it's a more recent Chevy 350 then it'll certainly provide a healthy bump over the maximum 160 horsepower from the diesel, especially running through a custom Flowmaster dual exhaust. An NP-205 two-speed transfer case switches between 2H, 4L, and 4H. The Dana 44 front and Dana 60 rear axles feature lockers and 3.52 gearing in back. Skyjacker Black Max provides the suspension to keep the 37-inch BFG KM2 on the pavement or the dirt. About 11,000 miles ago the owner rebuilt and upgraded the drivetrain, installing new accessories like a high-rise intake, four-core radiator, new alternator and Holley fuel pump. Losing the K5 body for an E-body Challenger cap means losing M1009 features like the rifle rack and gas can mounts. But you gain style, something real hard to find on a vehicle stout enough to back you up when you tell the crew, "I've been to hell and I'm going back." As part of that rebuild a few miles back, the minimalist interior got all new panels, dash and custom gauges, headliner, seats, and a Sony audio system with Alpine amps, a sub, and Kenwood speakers.

Fiat Chrysler faces $79 million U.S. penalty for fuel economy shortfall

WASHINGTON — Fiat Chrysler Automobiles NV on Wednesday said it faces a $79 million U.S. civil penalty for failing to meet 2017 fuel economy requirements, as regulators reported more automakers were falling short of U.S. greenhouse gas emissions standards. The Italian-American automaker said the payment is not expected to have a material impact on its business. Of 18 major carmakers in the United States, 13 including Fiat Chrysler failed to comply with fuel economy and greenhouse gas emissions standards for the 2017 model year without using credits, according to the National Highway Traffic Safety Administration (NHTSA). The agency said its review of model year 2017 vehicles showed "automakers falling further behind current standards." The 2017 model fleet fell 1 1/2 miles per gallon short of the 33.8 mpg standard based on yearly performance without including credits, NHTSA reported. The shortfall was a half-mile per gallon for the 2016 model year. NHTSA said more automakers were failing to comply with standards for the 2018 and 2019 model years, "and the potential penalties on automakers, which are passed along to consumers, are expected to continue to increase." The Trump administration has used the widening gap between the emissions of automakers' U.S. fleets, which are skewing toward larger vehicles, and national vehicle CO2 emissions standards to bolster its case for freezing vehicle emissions and mileage standards at current levels through 2026. Environmental groups and regulators in California and other states are fighting against any rollback in standards, saying tough rules are needed to address climate change and reduce consumer outlays for fuel. NHTSA and the Environmental Protection Agency are working to finalize as early as next month a rewrite of the Obama administrationÂ’s fuel efficiency requirements, which call for sharp reductions in fleet-wide emissions by 2026. Fiat Chrysler is paying fines for the shortfall in its domestic passenger car fleet, which includes several front-wheel-drive Jeep and rear-drive Dodge SUVs and some sedans and muscle cars. The automaker killed its slow-selling domestic small and midsize sedans. After paying $77.3 million last year for a 2016 model year fuel-economy shortfall, a Fiat Chrysler spokesman confirmed Wednesday the company had received a letter on the 2017 penalty and has 60 days to pay the fine.

Dodge brings Charger Widebody 'concept' to Spring Fest

Last week we asked if an Instagram user had really seen a Dodge Charger Widebody cruising suburban Detroit. The answer is yes, he had. Dodge brought its Charger Widebody concept to Spring Fest 14, a celebration of everything built on Chrysler's LX platform. Note the use of the word "concept," and a Fiat Chrysler spokesperson telling journos, "We are taking a Charger design concept to Spring Fest to gauge feedback from the huge Dodge Charger, Challenger, and Chrysler 300 enthusiast base that attends the California event each year." Mark Trostle, head of design for Dodge and SRT, shared a few snaps of the Charger Widebody to Instagram. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Now ignore the word "concept." Of course a thing isn't done until it's done, but two years ago a thread on Charger Forums mused on a Photoshop of the sedan as a widebody. User ResumeSpeed chimed in to say, "Rear is not accurate as it's being revised. 2020 model year. Two Charger WB models: Hellcat and 392 Scat Pack." Fast forward to February of this year when Mopar Insider said its sources confirmed a thick-hipped Charger R/T Scat Pack and Hellcat with "drastically different looking front and rear fascias." Then, earlier this month, Allpar received a slide from what looks like an internal Dodge presentation explaining the "2020 Dodge Charger Hellcat Wide Body." The sedan in the slide looks almost exactly like the "concept." And now this. They even designed it with the Dodge Durango SRT grille treatment, which seems like a logical part of that 2020 revision. Giving the Charger a nip and tuck, a little more tire, and a $6,000 surcharge similar to the Challenger Widebody makes too much sense to merely toy with and then file away. Check out this video for a complete walkaround, and stay tuned.