Find or Sell Used Cars, Trucks, and SUVs in USA

1951 Dodge Pilot House Rat Rod Truck, Hot Rod, Street Rod Custom Chevrolet Ford on 2040-cars

Year:1951 Mileage:23
Location:

Sweetwater, Tennessee, United States

Sweetwater, Tennessee, United States
Advertising:

1951 Dodge Truck Rat Rod Hot Rod/Street Rod Custom

 I have included pictures of the progress of this build.  Please if you have any questions about this truck call 423-519-3935.  If you want any specific pictures please text or call, we will provide you with any thing you may need.  We also have this truck for sale and reserve the right to end the auction early. Thank you and good luck!  THIS IS A NO RESERVE AUCTION!


305 Professionally Rebuilt Motor

Intake Weiand contender with Holley 650 vac/sec

Chrome Holley valve covers with chrome air cleaner

New Morosso Plug wire and all new cap/rotor/coil

The wiring harness is NEW painless wiring harness with modern fuses

New aluminum radiator with electric fan

New aftermarket brake booster & master cylinder

All new brakes front and rear

Steering is all new DD u-joints and shafts

Steering column is chrome with aftermarket 9 hole Steering wheel

Transmission is a Turbo 350 with a stock stall converter

Front end is a S-10

Rear end is a S-10 all mounted to stock frame

Front end is all S-10 with the v-8 conversion kit no homed motor mounts

Truck has aftermarket headers, hooked to straight Pipe exhaust

Truck was set up to put muffler very easily if needed or required by buyers state.

Interior

Stock seat redone black

New carpet

Custom made shifter

All new gauges that work

All turn signal indicators work high / low/

Hazards work

Tilt wheel

Body

Body was almost a rust free truck when we started

All new wood was added to the Bed

New polished aluminum 15 gallon fuel cell with working gas gauge

New Coy Wheels and Tires 18 x 8 in the rear / 18 x 7 in the front

Truck is bare metal with a coat of WD-40 ( I leave this truck outside with no problems)

Windshield wipers work

Truck is all stock suspension up front no lowering springs

The rear has a 4 inch block

Have seen small drips, from the motor, as it is still getting broken in.









Auto Services in Tennessee

Sunset Towing ★★★★★

Auto Repair & Service, Towing, Locks & Locksmiths
Address: 1040 Buffalo Trl, Morristown
Phone: (423) 587-5665

Solar Pros Window Tinting ★★★★★

Auto Repair & Service, Glass Coating & Tinting
Address: 2721 N Wright Rd, Alcoa
Phone: (865) 379-0510

Rod`s Tire Company ★★★★★

Automobile Parts & Supplies, Tire Dealers, Auto Oil & Lube
Address: 608 Highway 76, White-House
Phone: (615) 581-0430

Rocky Top Chrysler Jeep Dodge Ram ★★★★★

New Car Dealers
Address: 3269 Winfield Dunn Pkwy, Sevierville
Phone: (865) 932-4144

RCS Automotive ★★★★★

Auto Repair & Service
Address: 1610 Verona Caney Rd, Belfast
Phone: (931) 422-5075

Raleigh Tire Service Inc ★★★★★

Auto Repair & Service, Wheel Alignment-Frame & Axle Servicing-Automotive, Brake Repair
Address: 653 W Poplar Ave, Collierville
Phone: (901) 457-5326

Auto blog

Junkyard Gem: 1988 Dodge Aries America LE Station Wagon

Wed, Jan 9 2019

During the late 1970s, Chrysler appeared doomed as outdated car designs and a second catastrophic oil crisis caused by Middle Eastern conflict hammered sales. Chrysler had some successful economy cars made by Mitsubishi or based on Simca designs, but the need for an efficient, modern front-wheel-drive platform grew desperate. After a government bailout in 1979 bought some time, CEO Lee Iacocca masterminded the creation of the all-new K Platform, which hit showrooms for the 1981 model year. The first two K-Cars, the Plymouth Reliant and Dodge Aries, were big sales successes, and Chrysler went on building vehicles based on the platform through 1995. Here's an example of the later Aries wagon, found in a Phoenix self-service wrecking yard. The "true" K-Cars were the Aries, the Plymouth Reliant, the Chrysler LeBaron, and the Dodge 400. They have become very rare in wrecking yards today, so I honor their historical significance by documenting the ones I find. During my junkyard expeditions, I have photographed this '81 Aries wagon, this '81 Reliant wagon, this '82 Aries wagon, this '82 400 coupe, this '82 LeBaron convertible, this '83 Aries sedan, this '83 LeBaron Town & Country wagon, this '85 LeBaron woodie convertible, this '86 Aries sedan, this '86 LeBaron Town & Country wagon, this '86 Reliant wagon, and this '89 Reliant coupe. The early K-Cars could be purchased with optional Mitsubishi Astron 2.6-liter four-cylinder (complete with "HEMI 2.6" badging), but in 1988, the choices were down to a 93-horsepower 2.2-liter Chrysler-built four-cylinder or a 2.5-liter version of the same engine rated at 96 horses and 13 extra pound-feet of torque. This car has the 2.2. The "America LE" trim level was the only one available for the 1988 Aries, and it resulted in a fairly Spartan car. Tough, scratchy cloth upholstery and lots of hard plastic were the order of the day. The MSRP on this car started at $7,695, or about $16,770 in 2018 dollars. That's a lot of car for that kind of money. For comparison, the rear-wheel-drive (and much bigger) 1988 Pontiac Safari wagon went for nearly twice that price. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. By 1988, the Aries wagon was looking pretty old, but it was a bargain.

How Dodge is making sure dealers don't gouge Demon buyers

Tue, Jun 20 2017

The Dodge Challenger SRT Demon is a ridiculous 840-horsepower, limited-production machine that we're sure many are eager to purchase. But, they're probably not excited at the prospect of the massive dealer markups that accompany rare, high-performance cars. Fortunately, Dodge is taking steps to make sure buyers aren't paying thousands of dollars extra to get a car early, and its main method is production priority. Dodge announced that cars purchased at or below the MSRP of $86,090 will be the first ones the company builds and delivers. If a dealer sells an allocated car for more than the sticker price, that car won't be built until the high-priority vehicles have been. Dodge will also ensure fair distribution of the 3,000 Demons it will build by limiting the number of orders a dealer can submit. Dealers will be allocated a certain number of cars, and the amount will be based on how many Challenger and Charger Hellcats the dealer has sold. This should also help prevent dealers from hoarding cars and slapping sky-high prices on them. Also, the fact that every Demon comes with a number plate with the buyers' name on it should help prevent dealers from buying cars for the lot to mark up. In addition to revealing these measures, Dodge announced that buyers will be able to submit an order for a Demon at an eligible dealer tomorrow, June 21. The only dealers eligible for Demon ordering are those that have sold more than one Hellcat in the past 12 months. Cars will begin production this summer, and deliveries will begin in the fall. Related Video: Featured Gallery 2018 Dodge Challenger SRT Demon: New York 2017 View 48 Photos Image Credit: Drew Phillips Dodge Car Buying Car Dealers Coupe Performance dodge demon

Driving the Jeep J6, Shakedown Challenger and other Mopar concepts

Wed, Sep 11 2019

Mopar has been a one-stop-shop for factory-backed performance modifications and accessories on FCA products for a long time now. You want a 707-horsepower engine for your old Plymouth Belvedere? Mopar has you covered with the Hellcrate. Maybe you want a lift and off-roading lights on that newly-bought Wrangler? Mopar can accommodate those wants (or needs, we don’t judge) as well. We get to see some of the companyÂ’s weirdest creations every now and then, but rarely do we get the opportunity to drive the FCA Mopar concepts. ThatÂ’s what made this past Woodward Dream Cruise so special: We got to rip some of MoparÂ’s finest and most recent creations up and down Woodward Avenue. Everything from a 1971 Challenger restomod to the brand-new Easter Jeep Safari J6 concept was in attendance, so letÂ’s get right to it. Mopar Woodward View 6 Photos 1967 Plymouth Hellvedere This car is near the pinnacle of what you can do with off-the-shelf Mopar purchases. It was only a humble 1967 Plymouth Belvedere before Mopar dropped the 707-horsepower supercharged V8 from the Hellcat into the engine bay. Sound ridiculous? Yeah, it is. Other parts of it are new as well, including the disc brakes. Good call. However, Mopar didnÂ’t remove the classic car charm from the entire driving experience. The steering, for example, is surely as slow and inaccurate as it was back in 1967. That doesnÂ’t help matters when youÂ’re trying to put 707 horsepower to the pavement with less-than-ideal rear rubber. Floor it in damn near any gear of the Tremec six-speed, and the front end rises straight up as the rear kicks sideways with the force of many mules. There are no electronics such as traction control or stability control to step in and wrangle the car into submission. But hey, who wants them, anyway? The question remains: Should you buy a Hellcrate engine for your classic? If money were no object, the easy answer is yes. Have at it so long as you love smoky burnouts and excessive amounts of horsepower. Just make sure you know how to deal with that much power before you stick your right foot in it.   Dodge Challenger Shakedown View 15 Photos 2016 Dodge Shakedown Challenger Concept WeÂ’re going downhill in horsepower with this restomod, but the drivability and ease of driving goes way up. Dodge showed this “Shakedown” concept at SEMA awhile back, and as with most concept cars, getting a chance behind the wheel is a special opportunity.