Find or Sell Used Cars, Trucks, and SUVs in USA

2004 Neon Srt 4 on 2040-cars

Year:2004 Mileage:126000
Location:

Crosby, Texas, United States

Crosby, Texas, United States
Advertising:

This neon is in good condition overall. It has slight damage to passenger door but I have color matching door that comes with it. I also have two sets of suspension that comes wth it. Eibach sport and eibach pro. The wheels and tires only have a few thousand miles on them. Interior is clean no rips or cracks. I drive this car daily and never had any issues. All work was done at the 100xxx mile service. Also did a compression test plug and wires at 115xxx it has 150 psi to 155 psi on all four cylinders. This car runs,drives great it is fast and still very good on gas. Happy bidding!! This car has been very well maintained and runs flawlessly!! I drive this daily about 400 miles a week to work everything work as it should a/c heat work great it has led taillights marker lights front and rear you will love driving this car as I have without anything besides basic maintenance. Oil always changed on time with mobile 1 and k and n oil filters also hak & n cold air intake kit and upgraded waste gate. Bif with confidence! ! Buy drive enjoy!

Auto Services in Texas

Zoil Lube ★★★★★

Auto Repair & Service
Address: 3321 Fondren Rd, Fresno
Phone: (713) 783-2050

Young Chevrolet ★★★★★

New Car Dealers, Used Car Dealers
Address: 9301 E R L Thornton Fwy, Seagoville
Phone: (214) 328-9111

Yhs Automotive Service Center ★★★★★

Auto Repair & Service
Address: 19831 Greenwind Chase Dr, Katy
Phone: (281) 944-9748

Woodlake Motors ★★★★★

Used Car Dealers
Address: 2416 N Frazier St, Dobbin
Phone: (936) 441-3500

Winwood Motor Co ★★★★★

Auto Repair & Service, Gas Stations, Towing
Address: 4922 Graves Rd, Santa-Fe
Phone: (409) 925-2039

Wayne`s Car Care Inc ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Automobile Accessories
Address: 2725 S Cooper St, Richland-Hills
Phone: (817) 795-8436

Auto blog

Fiat Chrysler halts European production as coronavirus hits demand

Mon, Mar 16 2020

MILAN — Fiat Chrysler Automobiles (FCA) is halting production for two weeks at most of its European plants to help protect staff against the coronavirus pandemic and adjust to a slump in demand, the Italian-American carmaker said on Monday. Italy has been the European country worst hit by the crisis and the first to enforce a nationwide lockdown, which has now been replicated by Spain and, to a lesser extent, by France as the virus sweeps through the continent. With all non essential services closed, including car dealers, and people forced home except for strict working needs, many forecast a heavy fall in car sales in March. FCA — which according to analyst estimates produces around 25% of its vehicles in Europe — said the suspensions through March 27 would allow it "to effectively respond to the interruption in market demand by ensuring the optimization of supply." Ferrari, meanwhile, said it closed its two plants until March 27. Ferrari said it had so far ensured production continuity, and it already implemented all the health measures decided by the Italian government at the two sites, in hometown Maranello and in Modena. But it was "now experiencing the first serious supply chain issues, which no longer allow for continued production." Marco Opipari, an analyst at Fidentiis, said a few weeks of closures was not a big problem in an over-supplied European auto industry and lost production could be recovered later on. "The real problem is on the demand side, people are not buying cars now, and sales volumes are expected to be very bad in March, with a real impact on automakers' earnings," he said. FCA said in a statement that production for its FCA Italy and luxury Maserati units would stop for two weeks, extending a temporary closure period already planned for some Italian facilities. Affected plants are Melfi, Pomigliano, Cassino, Mirafiori, Grugliasco and Modena in Italy, Kragujevac in Serbia and Tychy in Poland. The FIOM union said FCA's decision was "necessary". The carmaker said the freeze would help it to resume activity promptly once market conditions allow it. "The group is working with its supply base and business partners to be ready to enable our manufacturing operations to deliver previously planned total levels of production despite the suspension when market demand returns," it said.

2 men die in Dodge Challenger Hellcat crash at Colorado airport

Tue, Sep 12 2017

Two friends died in the crash of a Dodge Challenger Hellcat over the weekend after they shot off the end of an airport runway, authorities said. That someone died in a 707-horsepower Hellcat is, sadly, not unexpected. But two aspects of the story are remarkable. First, the men's ages: The Denver Post reports the crash victims were Lynd Fitzgerald, 71, of Colorado Springs, and his passenger, Roger Lichtenberger, 76, of San Marcos, Calif. Second, their speed: The car was likely moving at over 100 miles per hour, authorities said. The men had permission to use the 8,300-foot runway at Central Colorado Regional Airport in Buena Vista. That's more than a mile and a half long. But when the car left the runway, it went 300 feet before flying over a ravine, hitting the ground, becoming airborne again, flipping end over end across a second ravine, and ultimately landing on its wheels 650 feet past the end of the pavement. Responding police officers tried to provide first aid, but the men were declared dead at the scene. "They were just test-driving this car. They went a little too fast. I don't want to surmise. ... They probably got to the end of the runway and, at that speed, didn't realize they were there so fast. And they lost control. It was just too high a speed and they got to the end of the runway," said Chaffee County Sheriff John Spezze. There were skid marks near the end of the runway, but the sheriff didn't know the length. "I've never seen anything like it," Spezze told the newspaper. "They had permission to be there. There were no laws broken." Related Video:

Watch dual-engined Dodge SRT4 do a FWD burnout, a RWD burnout, then AWD launch

Wed, Dec 3 2014

There's something fantastically insane about racers who go out on their own and build something unique. Just take this crazy video from last year of a twin-engine Dodge SRT4 at a drag strip that can burn the rubber at either end – or both ends – at a moment's notice. With tires sticking out way past the fenders, a massive cooling system at the front and no back window to speak of, this Dodge is clearly meant solely for speed. Though it's real party trick is being able to spin the front or rear wheels independently. The setup makes for three quite showy burnouts. When it came time to actually get down the track, things got somewhat awkward. Like other twin-engine creations we've seen, the separate powertrains make for some odd sounds and a weird look launching down the strip. Still, there's no doubt that the engineering behind this Frankenstein is very impressive. Scroll down to see this monster in action and another of it in a very mismatched race last year. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.