on 2040-cars

Auto blog

Dodge Durango Hellcat teased in 'Fast and Furious' spot is real, headed to New York

The Durango Hellcat teased in a Dodge commercial appears to be the real deal, according to a report that surfaced Monday afternoon, and we could see it as soon as the New York International Auto Show in April. The horsepower Gods are smiling upon us.  Motor Authority says that a Dodge insider was able to confirm the existence of a Durango Hellcat, and suggested it will make its public debut at the New York show this spring. "Hellcat all the things" has become a bit of a meme, and it appears Dodge is either in on the joke, non-ironically committed to the concept, or maybe a little bit of both. A commercial FCA debuted to coincide with the release of the trailer of the latest "Fast and Furious" film gave us our first brief glimpse the new supercharged Durango SUV. Credit for the original find goes to the fine (and eagle-eyed) folks at Road & Track, who spotted the fender badge at approximately the 17-second mark in the embedded commercial. The tease left little to the imagination. The badge is shown prominently on the fender of the mystery vehicle, which isn't much of a mystery at all. It's a Dodge and it's not a Charger or Challenger; no need to overthink it.  Immediately after, the camera cuts to what is obviously a Durango silhouette, but we can't see a whole lot in the glare of its headlights.  It also makes sense from a product cycle perspective, as the Durango is well past the point where it has received its AARP card and we're not necessarily expecting a replacement. The three-row slot in FCA's lineup may go exclusively to Jeep once all is said and done.  We know (or have heard rumors) that other variants of the family SUV are in the pipeline, making it clear that FCA plans to milk the aging three-row for all it's worth. The Jeep Grand Cherokee, which rides on the same fundamental platform but with a shortened wheelbase, has already gotten the Hellcat treatment in the Trackhawk, so porting this engine over for three-row duty should be a snap.  More importantly, a mild facelift may accompany other updates to the Durango, which would conveniently explain why Dodge obscured the Durango's front end in the teaser.  If there's any downside to this, it's that FCA is going to run out of vehicles eventually. With the Ram Rebel TRX well underway and now this, there just aren't many vehicles left in FCA's various brand lineups that can physically accommodate a supercharged, 6.2-liter V8.  Hopefully they have Sawzalls. Related Video:    

Junkyard Gem: 1988 Dodge Aries America LE Station Wagon

During the late 1970s, Chrysler appeared doomed as outdated car designs and a second catastrophic oil crisis caused by Middle Eastern conflict hammered sales. Chrysler had some successful economy cars made by Mitsubishi or based on Simca designs, but the need for an efficient, modern front-wheel-drive platform grew desperate. After a government bailout in 1979 bought some time, CEO Lee Iacocca masterminded the creation of the all-new K Platform, which hit showrooms for the 1981 model year. The first two K-Cars, the Plymouth Reliant and Dodge Aries, were big sales successes, and Chrysler went on building vehicles based on the platform through 1995. Here's an example of the later Aries wagon, found in a Phoenix self-service wrecking yard. The "true" K-Cars were the Aries, the Plymouth Reliant, the Chrysler LeBaron, and the Dodge 400. They have become very rare in wrecking yards today, so I honor their historical significance by documenting the ones I find. During my junkyard expeditions, I have photographed this '81 Aries wagon, this '81 Reliant wagon, this '82 Aries wagon, this '82 400 coupe, this '82 LeBaron convertible, this '83 Aries sedan, this '83 LeBaron Town & Country wagon, this '85 LeBaron woodie convertible, this '86 Aries sedan, this '86 LeBaron Town & Country wagon, this '86 Reliant wagon, and this '89 Reliant coupe. The early K-Cars could be purchased with optional Mitsubishi Astron 2.6-liter four-cylinder (complete with "HEMI 2.6" badging), but in 1988, the choices were down to a 93-horsepower 2.2-liter Chrysler-built four-cylinder or a 2.5-liter version of the same engine rated at 96 horses and 13 extra pound-feet of torque. This car has the 2.2. The "America LE" trim level was the only one available for the 1988 Aries, and it resulted in a fairly Spartan car. Tough, scratchy cloth upholstery and lots of hard plastic were the order of the day. The MSRP on this car started at $7,695, or about $16,770 in 2018 dollars. That's a lot of car for that kind of money. For comparison, the rear-wheel-drive (and much bigger) 1988 Pontiac Safari wagon went for nearly twice that price. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. By 1988, the Aries wagon was looking pretty old, but it was a bargain.

We're pretty sure the Challenger SRT Demon won't have 1,121 horsepower, but what if?

Dodge's slow rollout of the upcoming Demon continues, and with it comes endless speculation about what it all means. Every video, every image, and every press release contains some clue that points towards the Demon's final specs. We don't think any of it is random or arbitrary. This week cryptic image, a small plate with a name and two numbers, shows us a little more than last week's license plate. Unfortunately, Dodge will neither confirm or deny anything, meaning we have no way of knowing which rabbit hole to go down. Don't expect to see official horsepower, a quarter-mile time, or an MSRP until the New York Auto Show. The plate is attached to the crate of goodies that comes along with every Dodge Demon. This particular one is labeled with three things: Tom Coddington, serial number 0757, and VIN 001121. The name is simple enough. According to Hot Rod, Coddington was one of the original Ramchargers, a group of engineers in the early 1960s that helped Dodge get involved in drag racing. He was a fuel system specialist, motor consultant, and a rotating garage manager. All of that could be clues. While a name is easy enough to Google, the two numbers can't be broken down so easily. The crazier theory is that the car makes 1,121 horsepower and will do the quarter-mile in 7.57 seconds. Frankly, those numbers are about as likely as the Demon actually being powered by a Rolls-Royce turbofan engine from a Boeing 757 or packing a carburetor with 1,121 CFM. The Demon is going to be street legal, and the costs associated with making a 1,121-hp car meet emissions standards alone are assuredly astronomical. As our friends from Road & Track pointed out, the more likely theory is that 757 is actually the horsepower rating. This seems totally plausible, but it means we still don't know what 1,121 means. Surely it's not a drag strip time, as the standard Hellcat will do 1/4 mile in 11.2 seconds. Like before, if you have any ideas, post them in the comments. Until April, we'll keep trying to solve Dodge's demonic puzzle. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. News Source: Road & Track, Hot RodImage Credit: FCA New York Auto Show Dodge Coupe Performance dodge demon dodge hellcat