Sxt 3.8l Cd Handicappedpower Steering 4-wheel Disc Wheelchair Aluminum Wheels on 2040-cars

Auto blog

Chrysler recalls AWD 300, Charger, Ram 1500 over ZF transmission

What do the Chrysler 300, Dodge Charger and Ram 1500 all have in common? Yes, they're all Chrysler products, and two of them are based on the same platform. And we're sure you could find more similarities between them all, but the common trait we're looking at here is that, while they all come standard in rear-drive form, they're also available with all-wheel drive. And it's the transmission in those models that's the subject of the latest recall notice issued by the National Highway Traffic Safety Administration.
The output shaft on the eight-speed automatic transmission supplied by ZF to Chrysler for the AWD versions of the 300, Charger and Ram 1500 is apparently prone to fracture. That in the end could leave the vehicle without power and could, according to the NHTSA investigation, increase the chance of a crash. The vehicle could also roll away if even if left in Park without the handbrake applied.
That's why Chrysler is calling in 4,194 examples of those three models from the 2013 model year. Dealers will be responsible for inspecting the transmissions and, where necessary, replace the entire unit. See the full recall notice below for all the details.

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat

Our interview with Jeremy Clarkson and James May, plus SEMA! | Autoblog Podcast #491

This week, David Gluckman and Mike Austin talk SEMA madness, mis-aligned steering wheels, wireless charging, McLarens (they're sports cars!), and decals. We also have an excerpt from a recent interview with James May and Jeremy Clarkson of The Grand Tour and Top Gear fame. As always, we talk about a variety of cars we've been driving and then respond to some questions from listeners. And as a bonus, there's a trivia question mixed in. The rundown is below. Remember, if you have a car-related question you'd like us to answer or you want questionable buying advice of your very own, send a message or a voice memo to podcast at autoblog dot com. Oh, and please send trivia questions! You'll get the honor of stumping your fellow listeners, and we'll thank you too. Autoblog Podcast #491 The video meant to be presented here is no longer available. Sorry for the inconvenience. Topics and stories we mention Stars Selling Cars The Ford Flex is dying SEMA! Dodge Durango Shaker concept New Mercedes inline-six engines Our interview with Jeremy Clarkson and James May Mercedes-Benz E-Class McLaren 570S Ad of the Week: Volvo ABCs of Death Spend My Money on used cars Rundown Intro - 00:00 The news - 02:15 Clarkson/May interview excerpt - 17:12 What we've been driving - 21:12 Ad of the Week - 39:02 Spend My Money/listener questions - 44:13 Total Duration: 57:05 Get The Podcast iTunes – Subscribe to the Autoblog Podcast in iTunes RSS – Add the Autoblog Podcast feed to your RSS aggregator MP3 – Download the MP3 directly Feedback Email – Podcast at Autoblog dot com Review the show in iTunes Celebrities Podcasts SEMA Show Cadillac Dodge Ford McLaren Mercedes-Benz Volvo ford flex the grand tour mclaren 570s SEMA 2016