Handicap Wheel Chair Van 2000 Dodge Grand Caravan Se No Reserve Rebuilt Salvage on 2040-cars

Auto blog

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.

Values snowball for legendary Tucker Sno-Cats, latest toys of the super rich

Here's a fun-sounding vehicle perfect for the cold and snow that's currently gripping much of North America. Tucker — no, not that Tucker — just marked its 75th anniversary making the Sno-Cat, its orange-painted, four-tread snow vehicles that have inspired backcountry skiers, collectors — and increasingly, the super rich. Bloomberg in a recent story writes that demand for the Medford, Ore.-based company's products is soaring on demand from the wealthy, who need a way to get to their backcountry mountain retreats. They're also in demand from collectors and gearheads who also love snow, like two anonymous collectors who are believed to have amassed more than 200 vintage Sno-Cats. The value of vintage models has reportedly tripled in the past five years to well over $100,000 for a fully restored rig. Tucker Sno-Cat Corp. claims to be the world's oldest surviving snow vehicle manufacturer, launched by E.M. Tucker in 1942 out of a desire to design a vehicle for traveling over the kind of deep, soft snow found in the Rogue River Valley of his childhood. It was four Tucker Sno-Cat machines that helped English explorer Vivian Fuchs and his 12-man party make the first 2,158-mile overland crossing of Antarctica in 1957-58. While many of the company's competitors either shuttered or adapted to serving ski resorts with wider, heavier treads, Tucker has stuck to its formula of making lightweight vehicles to travel over deep snow. Many Tuckers use Chrysler's flat six-cylinder engine, or its Dodge Hemi V8 for larger Sno-Cats, mounted rear or centrally, with basic, no-frills aluminum cabins. Sno-Cats all have four articulating tracks that are independently sprung, powered and pivoted at the drive axle. Track options come in three different types: conventional steel grouser belt track, rubber-coated aluminum grouser belt track, and one-piece all-rubber track. Steering is hydraulically controlled by pivoting the front and rear axles for smooth movement over undulating terrain with minimal disturbance of the ground cover. The company today makes 75 to 100 Sno-Cats a year for customers including the U.S. military, oil-drilling crews in cold places like Alaska and North Dakota, and utilities. But demand is so high that it's launched a profitable service reselling and refurbishing old machines. E.M. Tucker's grandson, Jeff McNeil, now head of this division, scours Google Earth for abandoned Sno-Cats rusting in backyards that he might be able to acquire and fix up.

Weekly Recap: New bosses try to jump-start Cadillac and Lincoln

Both of America's domestic luxury brands seem to be stuck in neutral.
It's ironic that Cadillac and Lincoln got new bosses within days of each other this month. It's also a commentary on the fact both of America's domestic luxury brands seem to be stuck in neutral.