Crew Edition Leather Interior Back Up Camra on 2040-cars

Auto blog

NHTSA investigates FCA for SUVs that roll out of Park

The National Highway Traffic Safety Administration is opening a preliminary evaluation into the 2014 Dodge Durango and 2014-205 Jeep Grand Cherokee after 14 complaints of the SUVs rolling out of Park. An estimated 408,000 of them could be affected, if a recall is necessary. All of the current complaints submitted to NHTSA about the issue concern the Grand Cherokee, and the claims allege that the SUV can roll out of Park whether or not the engine is running. Some folks report that they check the indicator each time because the gear sometimes fails to engage. Among the 14 cases, there are five accounts of crashes and three injuries, including a situation with someone allegedly being rolled over. NHTSA's preliminary evaluations are meant to investigate "the scope, frequency, and safety-related consequence" of a reported problem. They don't necessarily lead to a recall. Related Video: INVESTIGATION Subject : Unattended vehicle rollaway Date Investigation Opened: AUG 20, 2015 Date Investigation Closed: Open NHTSA Action Number: PE15030 Component(s): POWER TRAIN All Products Associated with this Investigation Vehicle Make Model Model Year(s) DODGE DURANGO 2014 JEEP GRAND CHEROKEE 2014-2015 Details Manufacturer: Chrysler (FCA US LLC) SUMMARY: The Office of Defects Investigation (ODI) has received 14 complaints (VOQs) alleging that after being placed in Park the subject vehicles have then rolled away from their parked position. The unintended motion has occurred with both the engine off and the engine running. ODI has also identified EWR field report data related to the alleged defect. The model year 2014 and 2015 Jeep Grand Cherokee vehicles are equipped with an electronic gear selector (shift-by-wire system). The gear selection is made by pressing the shifter-paddle forward or backwards; the shifter does not move along a gate path as with conventional gear selectors. A Preliminary Evaluation has been opened to asses the scope, frequency, and safety-related consequence of the alleged defect. The VOQs associated with the opening of this investigation are: 10733158, 10730952, 10683556, 10679497, 10583366, 10725429, 10715401, 10711893, 10676998, 10668651, 10662619, 10662308, 10605865, and 10567538.

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat

Who are Mike Manley, Louis Camilleri, and Suzanne Heywood?

MILAN – Fiat Chrysler aid on Saturday that boss Sergio Marchionne, 66, would not be returning to work because he was gravely ill. In addition to being FCA chief executive, Marchionne was also CEO and chairman of luxury sports car brand Ferrari and chairman of truck and tractor maker CNH Industrial, which were spun off from FCA in recent years. Following is a brief summary on the executives who have been appointed to replace him in the various roles: MIKE MANLEY The 54-year-old Briton picked to become the FCA's new CEO has been leading the group's top brand Jeep since 2009, first as Jeep President and CEO at Chrysler and then as FCA's Jeep head. In 2015 he was also appointed head of the Ram brand. Under his tenure, Jeep turned into a global brand becoming, together with Ram, FCA's profit engine. Jeep sold nearly 1.4 million cars last year compared with less than 338,000 in 2009. Manley had worked as DaimlerChrysler's head of network development in Britain since 2000, having earlier worked for several years in car dealership. At Chrysler, he headed product planning and all sales activities outside of North America and then became the group's chief operating officer for Asia and the lead executive for the international activities outside of NAFTA. LOUIS CAMILLERI The new Ferrari CEO was already a board member at the luxury sportscar maker before his latest appointment. He is also the chairman of Philip Morris International, where he also held the job of CEO from 2008 to 2013. Born in 1955, Camilleri had joined Altria Group, which controls Philip Morris, in 1978 holding various positions until he became chief financial officer in 1996 and then CEO in 2002. Camilleri was also chairman of Kraft Foods from 2002 to 2007. Malta's Prime Minister Joseph Muscat wished Camilleri luck on Twitter saying he was proud to have "a bit of Malta in Ferrari" thanks to the new CEO, who was born in Egypt to Maltese parents. SUZANNE HEYWOOD The new, British-born chairwoman of CNH Industrial has been since 2016 the managing director of EXOR, the holding company through which the Agnelli family controls FCA. Heywood, 49, started her career at the British Treasury and then joined McKinsey in 1997, leading for many years the consultancy firm's global service line on organization design. She eventually became a senior partner there. Heywood sits on the board of The Economist, which is controlled by EXOR, and the board of the Royal Opera House, where she is also deputy chair.