Clean Carfax One-owner Alloy Wheels Stability Control Dual Zone A/c Mp3 on 2040-cars

Auto blog

Junkyard Gem: This 1987 Dodge 600 SE Sedan is suspiciously Benz-ish

The K Platform, introduced for the 1981 model year, saved Chrysler from certain bankruptcy. By 1983, a stretched-out K chassis had been developed; the Chrysler version was the E-Class, while Dodge had the 600. These cars have become all but extinct now, so this '87 600 sedan in a Denver-area wrecking yard is a noteworthy Junkyard Gem. Ford explicitly compared the appearance of the late-1970s Granada to that of the Mercedes-Benz W123 in their advertising, and so the ground was broken for Chrysler to make the allusions to Stuttgart machinery even more obvious a few years later. The name of the Chrysler E-Class was about as subtle as a tire iron blow to the kidneys, and the badging on its Dodge 600 sibling left little to the imagination. 600s came from the factory with several variations of the Chrysler 2.2/2.5 engine, as well as the Mitsubishi "Hemi 2.6" four-cylinder. This car has the 2.5 Chrysler engine, rated at 97 horsepower. Base price was $10,553, about $23,500 in 2017 dollars (the cheapest new Mercedes-Benz E-Class cost $38,600 in 1987, so there wasn't much customer overlap between the two cars). The 600s weren't bad cars for the price, though the build quality wasn't quite up to Mercedes-Benz standards. You'll find this thumbtack treatment on most K-Car headliners that still drive today. The interior is all tan and brown, with plenty of tough industro-velour upholstery and not-so-convincing artificial wood. Aluminum-faced home audio equipment was all the rage during the 1980s, and the trend spread to automotive controls. No cassette in this car, but at least it had AM and FM radio (even plain old mono AM radios were still expensive options on many cars as late as 1987, so the standard AM/FM stereo rig in the 600 was an attractive deal). This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. You can't beat the 600!

2018 Dodge Challenger SRT Hellcat Widebody First Drive | Same snarl, more bite

By now, you've read a lot about the Dodge Demon, including our driving impressions from the drag strip. You've also heard a lot about the Challenger Hellcat, which we've had the pleasure of driving at Portland International Raceway, Willow Springs, and on our home turf of Woodward Avenue, both during the Dream Cruise and for an episode of AutoblogVR. Last week, Dodge and SRT invited us out to Indianapolis to sample the Demon, as well as the Durango SRT. Sandwiched between those two launches, however, was another distillation of Dodge's retro-cool coupe, the 2018 Challenger SRT Hellcat Widebody. The Widebody shares most of the guts of the standard Charger Hellcat, but went to the same cosmetic surgeon as the Demon. The Hellcat 6.2-Liter V8 with 2.4-liter-per-rev supercharger, producing 707 horsepower and 650 pound-feet of torque, is unchanged. It comes standard with a six-speed manual transmission, but our tester had the optional eight-speed automatic with steering wheel-mounted paddle shifters. It's 3.5 inches wider (look at those fenders!) than the standard Hellcat, though, which allows it to accommodate 20-by-11-inch "Devil's Rim" wheels. It shares its front splitter with the Demon, but retains the Hellcat's rear spoiler. The Widebody also features an electronic power steering system with selectable drive modes. It just slightly outperforms the standard Hellcat, as well, with better cornering grip, improved acceleration, and better braking (even though it shares the same Brembo brake package as the standard Hellcat). Dodge claims that the Widebody does the quarter-mile 0.3 seconds quicker, dropping it just out of the 11s to 10.9 seconds. 0-60 miles per hour drops from 3.5 to 3.4 seconds. Lateral grip increases by 0.04 G to 0.97 G on the skid pad. On the company's 1.7-mile road course, Dodge says the Widebody drops two seconds off its lap time compared to the standard Hellcat, finishing about 13 car lengths ahead. We spent our time with the Hellcat Widebody on the infield road course at Indianapolis Motor Speedway. Sliding into the car, the seating position is cozy and comfortable even with a helmet on, and we have no trouble adjusting our chair and steering column to ideal placement. The infotainment display shows us our drive settings for the next few miles: the transmission and suspension are in Track Mode, steering is set to Sport, with traction set to Street. We fire up the car with an instructor in the right seat, and head out of the pit lane.

Custom 2014 Dodge Durango R/T proves SEMA can be subtle

The annual SEMA Show in Las Vegas can often be a sensory overload of overwrought madness, with cars that don't even look drivable anymore. But every once in a while, a modestly modified show car graces our presence, like the customized Dodge Durango you see here, which, in addition to giving us our first glimpse at the aftermarket possibilities for the refreshed-for-2014 model, proves that a car doesn't have to be slammed, scooped, donked and Lambo-doored to have presence.
Sure, this Durango has custom hood inserts, dark 22-inch wheels and custom fender flares, but as far as external modifications go, that's it. Inside, Dodge has fitted new door sill guards, an ambient lighting kit, bright pedals, premium floor mats and - of course - Katzkin leather. The automaker has even added wireless internet connectivity as part of the excellent Uconnect infotainment system.
Performance upgrades are minimal on this Durango R/T, which comes packed with Chrysler's 5.7-liter Hemi V8. Larger brakes have been fitted, as have lowering springs (though it certainly doesn't look that much lower) and a custom exhaust.