2014 Dodge Grand Caravan Avp/se on 2040-cars

Auto blog

2018 Dodge Challenger SRT Demon First Drive | Don’t fear the Demon

"If you're not hurt, we'll be really pissed. If you are hurt, we'll still be pissed, but not quite as pissed." These are the words from Jim Wilder, the vehicle development manager of the 2018 Dodge Challenger SRT Demon, that echo through our head as we slide behind the wheel of the car for the first time. He was warning us about driving beyond our abilities, and keeping the car out of the wall. With 840 horsepower and 770 pound-feet of torque on tap from its supercharged, 6.7-liter V8, the Demon does 0-60 miles per hour in 2.3 seconds, and 0-30 mph in a second flat. If something does go wrong, it'll happen quickly. Following that talk, we had our guts sloshed as a passenger in a blurry eighth-mile run, giving us a taste of the G forces (the Demon can pull 1.8 G in a straight line) we'd feel when we got in the driver's seat for our own pass down the drag strip. We're already sweating. It had rained - you could describe it as torrential - the day before. The grassy parking areas surrounding Lucas Oil Raceway were still flooded, but any water on the pavement had evaporated and hung in the air. Combined with the heat, we were sticky and uncomfortable. In Drag Mode, the Dodge Demon's air conditioning turns off. Any condensation that it could leave on the track would be a problem, plus we need to reduce parasitic power losses for a faster run. The system is still working, though, the refrigerant diverted to the chiller system cooling the air coming into the engine. There's still condensation, but the Demon collects it on a catch pad to keep it from ending up on the pavement. We're also required to roll the windows up when entering the drag strip. For one thing, it helps keep the smoke out of the cabin during the pre-staging burnout. So, yeah, it's hot as Hell in the Demon. We pull through the water box and run through the sequence – which involves holding the "OK" button on the steering wheel usually used to navigate menus, and applying a specific amount of brake pressure before getting on the throttle to initiate the burnout. This gets any crud off the rear tires and heats up the rubber. There are multiple ways to launch the Demon. We had an instructor sitting in the passenger seat as we pulled up to the beams that trigger the Christmas tree at Lucas Oil Raceway. He walks us through the most complicated of the three he had explained to us just minutes before when we were in the passenger seat.

Gauging reaction to the 2015 Dodge Charger Pursuit on Detroit highways

Steven Ewing and I kind of pretended to be cops a few weeks ago. No, not in the illegal way; we just took turns driving the 2015 Dodge Charger Pursuit around Detroit and its suburbs, learning invaluable life lessons along the way. A lot of those lessons came in the form of weird reactions from other drivers. Steve peeved his neighbors by surprising them in the parking lot, I can damn close to sitting in jail next to a murderer and we both caught our fair share of evil-eyed glances. One of my very first observations was a pronounced "bubble effect" when driving in traffic on the highway. Attempting to recreate the effect for the video camera, I grabbed Senior Producer Chris McGraw and we went for a ride in the name of pseudo psychology. The results weren't exactly as we'd predicted, but we had fun all the same. Get one more dose of your cop car fix, above.

Mopar Hellephant crate engine sells out in 48 hours

This happened so quickly that we're only just catching up with it. Mopar opened pre-orders on the 7.0-liter Hellephant Hemi crate engine on April 26, which is Hemi Day. According to Allpar, hubbub on social media not long after that day claimed Mopar had gone through all of its Hellephant stock. When Allpar asked Fiat Chrysler for clarification, a spokesperson e-mailed, "Given the high demand and the hand-built, time-intensive build process, we have closed preordering for the 426 Hellephant Supercharged HEMI crate engine. Based on preorders, the engine sold out in just two days. Customers can visit www.cratehemi.com to receive future information and updates on the 'Hellephant' engine." No one is certain how many engines Mopar sold. Allpar wrote, "Industry insiders believe Mopar may be making around 100," but reiterated that it's a guess. The engine and the ordering process have their peculiarities. Mopar Insiders explained that Tool Engineering International helped create the 426-cubic-inch block, and that the Hellephant engine "shares nothing except for displacement with the rumored upcoming 7.0-liter 426 Hemi V8." On the Hellcat.org forum, a poster wrote that the engines "can only be sold through a dealer and that the dealers can only order 1 engine per week." The Hellephant doesn't come with Mopar's three-year, 100,000-mile warranty, either. During a press briefing last October, FCA officials said they weren't sure about offering any warranty. Based on the motor being given a part number starting with the letter P, there is a bit of protection, but it's a 90-day limited warranty covering "defects in materials or wokmanship," and only applies to engines not used in competition. For those who didn't get the opportunity to drop $29,995 for 1,000 horsepower and 950 pound-feet of torque, the best bet is to hope for the return of Apollyon's pachyderm. Motor1 wrote that "Rumors hint at... another limited run scheduled for next year due to overwhelming demand." That's thin thread to hang a Hellephant from, but it beats bupkis.