2006 Dodge Grand Caravan Sxt 7 Passenger Sto N Go 3.8l Pwr Doors Lftgt @@@@@@@@@ on 2040-cars

Auto blog

FCA axes Dodge Journey and Grand Caravan for 2021

FCA confirmed this week that Dodge will end production of both the Grand Caravan and the Journey after the 2020 model year, leaving the brand without a front-wheel drive crossover for the first time since 2008, and without a minivan for the first time in nearly four decades.  "The year was 1983. Ronald Reagan was President of the United States of America. Lech Walesa was the Nobel Peace Prize Laureate. The Internet was created, and the first mobile phones were introduced to the public. U.S. astronauts completed the first space shuttle spacewalk; Michael Jackson performed the 'moonwalk.' The Baltimore Orioles won the World Series ... and Chrysler hit a home run with the introduction of the first minivan," FCA (then Chrysler LLC) said when it celebrated the minivan's 25th anniversary in 2008.  1984 Dodge Caravan View 9 Photos Since that anniversary, the Dodge variant of FCA's minivan has changed very little. It has received interior and powertrain improvements, including the introduction of the 3.6-liter "Pentastar" V6 in 2011, but its fundamental architecture has remained constant. The lack of attention it received came to light in 2019, when the outdated powertrain disqualified it from new-car sales eligibility in California.  The prior 25 years notwithstanding, the story of the Dodge Journey is somewhat similar. Introduced in 2008 as a 2009 model, it was praised as one of Chrysler's better, more modern offerings when it hit dealerships. Like the Grand Caravan, it later benefited from an interior overhaul and the introduction of the 3.6-liter V6, but its bones remained unchanged for the duration. This lack of attention showed, as the Journey slipped from borderline-competitive to also-ran.  2010 Dodge Journey R/T View 3 Photos The discontinuation of the Grand Caravan and Journey eliminates 40% of the Dodge lineup. The two models represent more than 38% of the brand's sales volume so far in 2020. For 2021, only the Charger, Challenger and Durango will remain. Minivan buyers will still have options at Chrysler, which offers several variants of the Pacifica, including the new Voyager, which is a stripped-down model aimed at budget-conscious buyers who would previously have been drawn to the bare-bones Dodge.  With this latest round of downsizing, Dodge will join Ram, Chrysler, Fiat and Alfa Romeo in the ranks of FCA brands offering four or fewer models; only Jeep will offer more.  Related Video:

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat

The Dodge Demon was developed under a cloud of smoke

The Dodge Demon needs no introduction. The car is so full of superlatives that most of it sounds unbelievable until you see and hear it in action. The car was revealed after months of teasers and cryptic messages, but the public weren't the only ones in the dark. From the start, the Demon's development was a closely guarded secret. There were even some within SRT that didn't know about the project. The people behind the car went through a lot of effort to keep it that way. At an event covering the finer details of the Demon's supercharged 6.2-liter V8, Dodge CEO Tim Kuniskis and SRT Powertrain Director Chris Cowland spoke about the smoke and mirrors used to hide the Demon's development. Work on the car progressed for nearly two years before it was made public, with just a small team having full access to the project. Numbers were altered. Secret meetings were held. SRT engineers worked nights and weekends while parts suppliers were given as little information as possible to move progress forward. Preliminary work on the Demon began in April of 2015, not long after the standard Hellcat hit the streets. The goal wasn't to create a faster Hellcat. Kuniskis said that would have been easy. They wanted a single-minded vehicle that could also be driven on the road. It's the same mindset that brought about the Dodge Viper ACR. Dodge wanted a car that could sell the brand to both enthusiasts and non-enthusiasts alike. 840 horsepower is going to raise anyone's eyebrows, including the Camry owner parked down the street. While preliminary work started in April, the final greenlight wasn't given until September. The project was originally going to revive the American Drag Racer, or ADR, name. When we saw the first hints of the Demon last fall, we labeled the spy photo above the Dodge Challenger ADR. It was set to have 10-percent more power and 20-percent more launch force than the already gut-punching Hellcat. It was also only going to have a quarter-mile time in the 10s, just slightly quicker than the Hellcat. Somewhere along the line, the team realized that the ADR wasn't enough. It was just going to be a Hellcat plus, and that wasn't exciting. The main goal was changed: 9s with light. Translated, that means a 9-second quarter mile with light under the tires (read: a wheelie). From that point forward, everything about the Demon's development, from power to suspension to weight, would be done in pursuit of that goal.