2002 Dodge Grand Caravan Handicap Wheelchair No Reserve on 2040-cars

Auto blog

Macron and Le Pen decry 'shocking' Stellantis CEO pay

PARIS — French President Emmanuel Macron and his far-right challenger in the French presidential vote, Marine Le Pen, on Friday both decried as “shocking” the multimillion euro payout to the CEO of carmaker Stellantis. Stellantis CEO Carlos TavaresÂ’ remuneration package of 19.15 million euros just a year after the company was formed became an issue as Macron and Le Pen campaigned ahead of the April 24 runoff vote. Polls show purchasing power and inflation are a top voter concern. Stellantis was formed last year through the merger of PSA Peugeot and Fiat Chrysler Automobiles. Centrist President Emmanuel Macron, perceived by many voters as being too pro-business, called the pay package “astronomical” and pushed for a Europe-wide effort to set ceilings on “abusive” executive pay. “ItÂ’s shocking, itÂ’s excessive,” he said Friday on broadcaster France-Info. “People canÂ’t have problems with purchasing power, difficulties, the anguish theyÂ’re living with, and see these sums. Otherwise, society will explode.” Far-right leader Marine Le Pen, who enjoys support from many working-class voters, called for bringing in more workers as shareholders. “Of course itÂ’s shocking, and itÂ’s even more shocking when it is the CEOs who have pushed their society into difficulty,” she said Friday on BFM television. “One of the ways to diminish this pay, which is often out of proportion with economic life, is perhaps to allow workers in as shareholders.” Stellantis continued to back the package despite a 52.1% to 47.9% vote rejecting it at an annual shareholders' meeting chaired from the Netherlands, where the company is legally based, on Wednesday. The company, citing Dutch civil code, noted that the vote is advisory and not binding. The company later said in a statement that it took note of the vote, and will explain in an upcoming 2022 remuneration report “how this vote has been taken into account.” In the 2021 report, the company identified peer group companies that it used as a salary benchmark, including U.S. companies like Boeing, Exxon Mobile, General Electric as well as carmakers Ford and General Motors. Stellantis, whose brands include Peugeot, Fiat, Jeep, Opel and Maserati, reported net profits last year had tripled to 13.4 billion euros ($15.2 billion). The French government is the third-largest shareholder in Stellantis, with a 6.15% stake through the Bpifrance Participations S.A. French public investment bank.

Junkyard Gem: 1990 Plymouth Voyager Turbo

There was a time when the word "TURBO" was king, and even Detroit minivans came with nervous, hair-drier-boosted engines and screaming TURBO badging. Why, some of them even had manual transmissions (sadly, not this van) and in the case of the 1990 Plymouth Voyager Turbo I spotted in a Denver self-service wrecking yard, a lysergic purple paint plus a Bordello Red interior. The first-generation Voyager minivan (not to be confused with the full-sized B-series Voyager van that preceded it) was a tremendous smash hit for Chrysler. Because it came from the K-Car platform, most of the powertrain options available for other members of the many-branched K Family Tree— from the Mitsubishi Astron to the Chrysler turbo 2.5— went into the Voyagers, Caravans, and Town & Countries. The turbocharged 2.5-liter four, rated at 150 horsepower, was an option for the 1989 and 1990 Voyagers. That doesn't sound like much today, an era in which the Voyager's descendants churn out close to 300 horses, but it was lunacy for a front-wheel-drive family hauler that weighed just over 3,000 pounds. And people eventually discovered they could be made far faster than stock. Voyager shoppers could get five-speed manual transmissiona with their Turbo 2.5 engines, though few did. Still, there were more Voyagers and Caravans with the 5-speed than you might think, in part because of the manual transmission's lower cost. The slushbox didn't conquer the Chrysler Corporation Minivan World until 1996. Nissan probably had the most vividly red interiors of the late 1980s and early 1990s, but Chrysler didn't lag far behind. Look at these acres of shiny red plastic and tough, red I Can't Believe It's Not Velour! Because minivans remain useful for decades, most of them have high odometer readings by the time they get junked. So at a little over 115,000 miles, this one may have had a busted speedometer cable. Speedometers reading better than 85 mph were legal after 1981, but perhaps Chrysler decided not to encourage lead-footed hoonery among minivan drivers. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Auntie Entity pitching "the best-loved minivan in the world." Featured Gallery Junked 1990 Plymouth Voyager Turbo View 19 Photos Auto News Chrysler Dodge Automotive History Minivan/Van dodge caravan

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat