2000 Dodge Grand Caravan Se Wheelchair.handicap.mobility on 2040-cars

Auto blog

Stellantis axed the SRT engineer team, but performance isn't going away

Stellantis has broken up the Street & Racing Technology (SRT) engineering team that created over a dozen high-performance vehicles, including the Dodge Charger Hellcat, but the situation isn't as dire as it sounds. The newly-formed company assigned SRT's former engineers to different positions, where they'll continue to make hot rods. "All of the core elements of the SRT performance engineering team have been integrated into our company's global engineering organization," a spokeswoman told enthusiast website Mopar Insiders. She added that integrating SRT's personnel into other brands in the Stellantis portfolio will ensure that the lessons learned from decades of peddling speed will permeate other products. Previously, SRT operated with a high degree of independence. Don't get too excited. Her statement does not necessarily mean that Citroen will begin building cars powered by the Hellcat engine, though a C3 Chat D'enfer sounds absolutely epic. Technology transfer will likely be limited to fields like aerodynamics and thermal management, and the design department might learn a couple of neat new tricks. Dodge will still move forward with the development of its next SRT-branded cars; the decision to dissolve the SRT team will not affect future models, according to the spokeswoman. Whether they'll be powered by a V8 is up in the air, because company boss Tim Kuniskis warned that regulations are killing the eight-cylinder engine. Similarly, Jeep will continue designing high-performance models, like the Grand Cherokee Trackhawk. What changes is that the model will be developed and designed by a group of engineers and designers from Jeep, not from SRT. SRT is dead, but performance isn't going away. SRT's demise nonetheless marks the end of an era for Chrysler. The division traces its roots to 1989, when some of the company's brightest minds were brought together to develop the first-generation Dodge Viper. It merged with Team Prowler to form the Specialty Vehicle Engineering (SVE) group, which was renamed Performance Vehicle Operations (PVO) in 2002 and finally dubbed SRT in 2004. SRT has operated as the carmaker's in-house tuner since, its resume includes a diverse selection of cars ranging from the Neon SRT-4 to the 1500 TRX, and it was promoted to a standalone brand led by designer Ralph Gilles in 2011. Fiat-Chrysler Automobiles (FCA) axed the SRT brand in 2014 but kept the name and the development team. Related video:

FCA recalls 570,000 SUVs from Jeep and Dodge over fire woes

Fiat Chrysler US has issued two recalls covering a total of about 570,000 Jeep and Dodge models. The first concerns vanity mirror wiring in the Jeep Grand Cherokee from the 2011 and 2012 model years, and in Dodge Durango units built before September 12, 2012. The automaker recalled almost 900,000 units last year to repair the issue, then faced more issues this year when the fires continued in repaired vehicles. This new recall seeks to resolve the issue, FCA saying that the post-recall fires happened in a tiny percentage of vehicles equipped with a specific wiring package. This recall is for 352,831 total units in the US, another 26,478 in Canada, 13,037 in Mexico, and 84,330 internationally. No injuries or deaths have been reported. FCA says it will inform customers as to when they can schedule a service visit to remedy the issue. The second recall takes aim at 60,107 examples of the Jeep Compass and Patriot from the 2015 model year in the US, plus 5,755 in Canada, 3,351 in Mexico, and 23,995 in other markets. Those models could suffer from an out-of-position clamp on the power steering fluid line. The error could allow fluid to leak, increasing the risk of a fire if the fluid ends up on a hot surface. In the case of a complete loss of fluid, drivers will need to use a lot more effort to steer. The automaker reports no injuries or accidents, and will advise customers when to head to the dealer for service. Related Video: Jeep Grand Cherokee and Dodge DurangoStatement: Vanity-Mirror WiringDecember 24, 2015 , Auburn Hills, Mich. - FCA US LLC is recalling an estimated 352,831 SUVs in the U.S. to help ensure vanity-mirror wiring may be serviced more consistently.Overheating conditions were reported among a small percentage of vehicles (<0.02%) serviced in connection with a related recall, conducted previously.** An FCA US LLC investigation discovered the service procedure, if not followed precisely, may leave vehicles susceptible to a short-circuit, creating a potential fire hazard.The Company is unaware of any related injuries or accidents. Post-service overheating conditions were observed only in vehicles equipped with a certain wiring package. These vehicles were produced before Sept. 2, 2012.Affected are model-year 2011-2012 Jeep Grand Cherokee and Dodge Durango SUVs produced before Sept. 2, 2012. Wiring in the headliners of these vehicles will be secured with a new adhesive.

1968 Dodge D200 'Lowliner' adds low-down diesel torque to a lowrider

When Mopar does a custom classic car, it's always spectacular, whether it's a Dodge muscle car like the 1,000-horsepower Super Charger or the monster Jeep Five-Quarter off-road pickup. For SEMA this year, Mopar skipped another Dodge sports coupe in favor of a 1968 Dodge D200 pickup truck done up as a lowrider, but with a twist. Or more accurately, with lots of twist. Under the gorgeous candy red metallic body is a 5.9-liter 24-valve Cummins turbodiesel straight-six. It makes an estimated 325 horsepower and 610 pound-feet of torque, and it's paired with a six-speed manual transmission. Representatives from Chrysler estimated the weight of the engine and transmission alone at 1,100 pounds. The diesel engine's power goes to the rear wheels, which are 22 inches in diameter and 11 inches wide with fat 325-mm tires. The front wheels are a tad narrower at 9.5 inches. 1968 Dodge D200 View 7 Photos As cool as the powertrain is, the exterior and the interior of the truck can't be ignored. This generation of Dodge pickup is already intriguing with its distinct character line with a little kink at the end and ribbed and louvered hood. These unique styling cues are accented now that Dodge removed various other details from the body such as the door handles, metallic trim and such. The bumpers were also reshaped to better fit the contours of the body, and the front wheels were pushed forward to reduce the long overhang of the stock truck. The bumpers, grille, and "smoothie" style alloy wheels were also painted in a solid cream color rather than chrome, which both accents the deep red body and gives the truck a more workmanlike feel, as low-trim cars typically had painted trim instead of chrome or stainless steel. The red paint also features subtle Cummins logos on the fenders and Dodge block lettering on the tailgate. The interior continues the simple and classy theme. The original bench seat remains, but with saddle brown leather upholstery. Leather trim has been added throughout, and exposed metal parts have been painted in the same color as the exterior. Simple gray cloth floor mats cover the bottom of the cab, and the instrument panel uses new Mopar gauges in a machine-turned metal housing. The original steering wheel remains, but a custom shifter with red Cummins shift knob sticks through the floor.