09 Mini Van Family 7 Passenger Cargo Work Dual Purpose Florida Stow & Go Gr on 2040-cars

Auto blog

Fiat Chrysler expands Takata airbag recall to 3.3M vehicles

Fiat Chrysler Automobiles is expanding its recall of vehicles equipped with Takata airbags, moving beyond Florida, Hawaii, Puerto Rico and the US Virgin Islands to the greater US, as well as Mexico, Canada and beyond. The affected vehicles, some 3.3 million in total, were built between 2004 and 2007, with many models, including the Dodge Ram 1500, 2500 and 3500, Durango and the Chrysler 300, having been affected by Chrysler's previous recall. Despite the somewhat alarming nature that comes with a recall of this many vehicles, it seems that Chrysler is moving more out of an abundance of caution (and federal pressure) than anything else, saying: "Neither FCA US, nor Takata Corporation, the supplier, has identified a defect in this population of inflators. These components also are distinct from Takata inflators cited in fatalities involving other auto makers. More than 1,000 laboratory tests have been performed on these components. All deployed as intended, but FCA US continues to study the suspect inflators, which are not used in the Company's current production vehicles." Owners of affected vehicles will be notified and asked to report to dealers for a free replacement driver's side airbag. Scroll down for the official press release from FCA. Statement: Global Air-Bag Inflator Replacement December 19, 2014 , Auburn Hills, Mich. - FCA US LLC will replace driver's-side air-bag inflators in an estimated 3.3 million older-model vehicles worldwide, in an expansion of an ongoing regional field action. Neither FCA US, nor Takata Corporation, the supplier, has identified a defect in this population of inflators. These components also are distinct from Takata inflators cited in fatalities involving other auto makers. More than 1,000 laboratory tests have been performed on these components. All deployed as intended, but FCA US continues to study the suspect inflators, which are not used in the Company's current production vehicles. Outside of Florida, one of the areas covered by the original action, no FCA US vehicle has been linked to an air-bag deployment of the type that has raised public concern. Nevertheless, the Company is replacing the Takata components tied to that concern. FCA US is aware of one related injury involving one of its vehicles, an older-model sedan. It occurred in a southern Florida region marked by persistent, high, absolute humidity – a condition believed to be a contributing factor in the air-bag deployments under investigation.

Stellantis previews 4 electric platforms: Here's how they'll be used

Stellantis EV Day is hitting hard and fast this morning, with big news coming from Dodge and Ram and Jeep and the rest. But to support those brand transformations, a core initiative within Stellantis will help it become a leader in electrification. To do that, the group is developing platforms and technologies with cross-shared components and systems. This starts with four flexible BEV platforms: STLA Small, STLA Medium, STLA Large and STLA Frame. As for targeted numbers, they’re lofty: By 2024, Stellantis aims for over 500 miles of range, 0-62 mph in 2 seconds and charging 200 miles of range in 10 minutes. The four platforms will offer battery capacities from 37 kWh to more than 200 kWh. More specifically, STLA Small will offer 37-82 kWh and up to 300 miles of range. STLA Medium will have 87-104 kWh and up to 440 miles. STLA Large will provide 101-118 kWh and up to 500 miles of range. The truck-focused STLA Frame will provide 159-200+ kWh and up to 500 miles of range (and will support an electric Ram 1500 pickup). Chrysler EV Front 34 View 8 Photos Stellantis has big plans for the STLA Large platform, and is currently developing eight vehicles for it in the next three to five years. Examples of possible vehicles shown include a midsize Ram truck and a Jeep off-roader that could fight against the likes of the Toyota 4Runner. Stellantis design boss Ralph Gilles could be seen in a presentation looking over a Chrysler electric crossover based on this platform. We also saw a Wagoneer badge teased momentarily. There was a rendered silhouette of a crossover that looked like it could compete with the Ford Mustang Mach-E. Gilles said the platform would allow Stellantis to “create a long-range luxury sedan, an all-conquering muscle car, a heart-of-the-market DUV, a heart-of-the-market SUV, a very capable Jeep off-roading white-space opportunity vehicle as well as a new mid-sized truck.” See for yourself in this video starting at the 90-minute mark. As for powertrains, Stellantis is developing three electric drive modules with a shared, scalable inverter, and other common components, as well as in-house software to control them. Those drive units will offer from 70 to 330 kW (94-402 horsepower). More specifically, one EDM will provide 70 kW, a second will provide 125-180 kW, while the most potent can produce 150-330 kW.

The Dodge Demon gets a Drag Mode and a lesson in Newtonian physics

It's Thursday morning, which means we have more news on the upcoming Dodge Demon, the pumped-up Challenger Hellcat variant that's looking to cause mayhem at a drag strip near you. This week's video, "Third Law," shows the Demon's revised suspension in action and displays another one of SRT's cryptic messages. Dodge claims that the 6.2-liter supercharged Hemi V8 in the Hellcat twins is compromised because it's fitted to a car that needs to be comfortable on the street in addition to a performer on the drag strip. Not so with the Demon, as Dodge says the car is "designed to be highly competent in all drive modes and configurations," including the all-new Drag Mode. Dodge says details about the new mode will trickle out over the next few weeks, but all the info this week focused on suspension. The "Third Law" in this week's title refers to Isaac Newton and motion: "When one body exerts a force on a second body, the second body simultaneously exerts a force equal in magnitude and opposite in direction on the first body." We're not sure what Newton would have thought seeing the sidewall wrinkling Nitto NT05R drag radials in action, but he'd probably have a reaction of some sort himself. An ideal suspension setup for the drag strip makes for a poor setup on the road. As Dodge puts it, the "old school" way to set up a drag car was to "get the quickest reacting springs upfront, the softest rebound front shocks that wouldn't restrict the springs' reaction, remove any restrictions (sway bar) and increase the compression of the rear shocks." This would give a car great front to rear weight transfer but made for very poor lateral direction control, meaning minor corrections were difficult. The Demon's Drag Mode will use electronics to give the car the best combination of launch and lateral stability. Dodge listed some of the parts to help aid in this goal. They also gave us a few equations that we can't make sense of. Let us know if you have any clues. Hardware: 35 percent lower rate front springs/28 percent lower rate rear springs 75 percent lower rate hollow front sway bar/44 percent lower rate rear sway bar Drag-tuned Bilstein Adaptive Damping Shocks Software: Rear = F/F and Front = F/S F/F – F/S maintained @ wide open throttle (WOT) F/F – F/F < WOT Traction control disabled/ESC maintained Result: 13.5=575@500 Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.