2018 Dodge Durango Gt on 2040-cars

Auto blog

Dodge Challenger outsold Mustang, Camaro in third quarter of 2019

The Dodge Challenger is nearly old enough to start driver's ed in some states, and it doesn't have a firm grasp on the increasingly crucial concept of downsizing, yet it beat the odds to become the most popular American two-door model during the third quarter of 2019. Its ballooning sales figures suggest buyers don't always want the latest, most advanced car they can get their hands on. Dodge sold 18,031 examples of the Challenger during the third quarter of 2019, a shocking 21% increase over the same period in 2018. It's a true muscle car, normally sardined in the same can as the Chevrolet Camaro and the Ford Mustang, a pair of smaller, nimbler two-doors that are much closer to the historic definition of a pony car. Semantics aside, the Mustang finished on the second spot of the sales podium with 16,823 sales, a 12.3% drop compared to the third quarter of 2018, and the Camaro took third with 12,275 sales, a 15% dip that alarmingly comes in the wake of two redesigns. More specific sales figures aren't available. We don't know what percentage of the sales mix V8s represent, or whether buyers prefer manual or automatic transmissions. The scoreboard looks different when we examine 2019's year-to-date figures. The Mustang takes first place with 55,365 sales, followed by the Challenger at 46,699, and the Camaro at 36,791. While the Challenger's recent ascent is encouraging, it can't mask the fact that two-door models no longer enjoy a favorable tailwind, and the entire segment — not just the American entries — is declining. The aforementioned year-to-date figures are down by 10.1, 11, and 7.6 percent, respectively. The third-quarter statistics revealed a handful of other surprises unrelated to the world of performance. Dodge notably sold three examples of the Dart, a sedan it hasn't built since 2016. That's a 93% drop compared to the 45 units that found a home during the third quarter of 2018.

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat

Mopar Hellephant crate engine sells out in 48 hours

This happened so quickly that we're only just catching up with it. Mopar opened pre-orders on the 7.0-liter Hellephant Hemi crate engine on April 26, which is Hemi Day. According to Allpar, hubbub on social media not long after that day claimed Mopar had gone through all of its Hellephant stock. When Allpar asked Fiat Chrysler for clarification, a spokesperson e-mailed, "Given the high demand and the hand-built, time-intensive build process, we have closed preordering for the 426 Hellephant Supercharged HEMI crate engine. Based on preorders, the engine sold out in just two days. Customers can visit www.cratehemi.com to receive future information and updates on the 'Hellephant' engine." No one is certain how many engines Mopar sold. Allpar wrote, "Industry insiders believe Mopar may be making around 100," but reiterated that it's a guess. The engine and the ordering process have their peculiarities. Mopar Insiders explained that Tool Engineering International helped create the 426-cubic-inch block, and that the Hellephant engine "shares nothing except for displacement with the rumored upcoming 7.0-liter 426 Hemi V8." On the Hellcat.org forum, a poster wrote that the engines "can only be sold through a dealer and that the dealers can only order 1 engine per week." The Hellephant doesn't come with Mopar's three-year, 100,000-mile warranty, either. During a press briefing last October, FCA officials said they weren't sure about offering any warranty. Based on the motor being given a part number starting with the letter P, there is a bit of protection, but it's a 90-day limited warranty covering "defects in materials or wokmanship," and only applies to engines not used in competition. For those who didn't get the opportunity to drop $29,995 for 1,000 horsepower and 950 pound-feet of torque, the best bet is to hope for the return of Apollyon's pachyderm. Motor1 wrote that "Rumors hint at... another limited run scheduled for next year due to overwhelming demand." That's thin thread to hang a Hellephant from, but it beats bupkis.