2017 Dodge Durango Gt on 2040-cars

Auto blog

Fiat Chrysler recalls 320,000 Dodge Darts that could roll away

WASHINGTON — Fiat Chrysler Automobiles NV said Friday it is recalling more than 320,000 Dodge Dart compact cars in North America that could roll away because of a defective part that could allow the shift cable to detach from the transmission. The Italian-American automaker said the recall covers 2013 through 2016 model year automatic transmission Dart cars and that the defect could prevent drivers from shifting vehicles into park. The company said it is not aware of any crashes or injuries related to the issue but has several thousand reports of related repairs to vehicles. The company said a cable bushing may degrade after prolonged exposure to high ambient heat and humidity. The company said owners should make sure they shut off the vehicle and engage the parking brake. Fiat Chrysler will replace the transmission side shifter cable bushing, the company said. The company did not said when repairs will be ready. The recall covers about 298,000 U.S. vehicles, 20,117 in Canada, 3,400 in Mexico and about 900 outside of North America. Fiat Chrysler ended production of the Dart in 2016. FCA has had a number of recalls over shifter problems in recent years. Some 1.5 million Ram trucks were recalled in 2017 for a shifter problem, and another 228,000 were recalled in 2018. And 1.1 million Chrysler, Dodge and Jeep models were recalled in 2016 over what the National Highway Traffic Safety Administration called an "unintuitive" shifter design that caused drivers to exit their vehicles thinking they were in Park when in reality they were still in Drive or Reverse. The shifter in Dodge Chargers, Chrysler 300s and Jeep Grand Cherokees was implicated in more than 120 accidents, more than 40 injuries, and in the death of "Star Trek" actor Anton Yelchin.

Chrysler recalling 2009-2010 Ram 1500, Dodge Dakota pickups over axle pinion nut

Chrysler is issuing a recall for the 2009 and 2010 Ram 1500 and Dodge Dakota pickup trucks due to improper installation of the rear axle pinion nut. According to the National Highway Traffic Safety Administration, a total of 44,300 trucks are affected by the recall, and there have been 12 confirmed incidents including one crash.
The issue on both trucks is that the pinion nut is loosening on some trucks due to a lack of thread adhesive, and it is causing the rear axle to lock up resulting in loss of vehicle control. NHTSA's recall notice says that eight incidents occurred at speeds over 35 miles per hour and most also exhibited driveshaft failures as well since the loss of the pinion nut would cause the gear to separate from the driveshaft. In one complaint, the driveshaft separated from the rear axle and punctured the gas tank.
Chrysler will begin sending out recall notices to affected owners in November, but scroll down to see the official NHTSA notice.

FCA inline-six rumored to be real, headed for Jeep Wagoneer

In September, Allpar reported that that clues being dropped at Fiat- Chrysler headquarters, in the carmaker's factories, and on engineer resumes pointed to the development of an inline six-cylinder engine. The site has just proclaimed the rumor is reality, writing that the straight-six, "turbocharged to meet or beat 5.7 Hemi power ratings, with a smoother torque curve, is on the way." The motor's first outing is expected to be either the next-generation Jeep Grand Cherokee, debuting perhaps next year, or the Jeep Wagoneer, debuting in 2020 or 2021. "Tornado" is the purported codename for the power plant said to be just under three liters in displacement, expanding the family begun with the Global Medium Engine 2.0-liter turbo codenamed Hurricane. Engine bay constraints and a long use horizon mean engineers won't simply add two more cylinders to the GME, however. Allpar says the brief is to keep the Tornado GME-T6 — the alphanumeric for "turbocharged six" — no more than three inches longer than the Tigershark 2.4-liter four-cylinder. That means "major design changes" that could include a space-saving head, more closely spaced cylinders, and no cylinder liners. An FCA division called Comau could be called on for its "SmartSpray" plasma lining technology. Allpar muses that the standard version of the engine for Chrysler, Dodge, Jeep, and Ram could get a single twin-scroll turbocharger. Performance trims for Alfa Romeo and Maserati could get different heads and maybe twin turbos, an SRT version might also get both those tweaks. History shows that the Italian versions would make changes to the block, as well. Even so, the Tornado would be less expensive than any Ferrari-supplied V6. A straight-six would put FCA in company with current adopters BMW and Mercedes-Benz, future users like Jaguar, and perhaps Aston Martin. The engine would span the widest range of use cases in the U.S. carmaker's portfolio, though. Potential applications include being a base engine for Ram trucks, serving double duty as a base engine and 5.7-liter Hemi replacement for the Dodge Charger and Challenger, working in the high-end Jeeps, and as a properly hot trim — with Ferrari-designed heads — in the luxury Italian sports cars. The Alfa Romeo Giulia begs for just such motivation to fill the gap between the 280-hp, $42,695 Ti Sport RWD and the 505-hp, $73,700 Giulia Quadrifoglio RWD. And a twin-turbo inline-six in a Maserati Alfieri would stack up nicely with the Germans.