2014 Dodge Durango Limited on 2040-cars

Auto blog

2018 Dodge Challenger SRT Demon First Drive | Don’t fear the Demon

"If you're not hurt, we'll be really pissed. If you are hurt, we'll still be pissed, but not quite as pissed." These are the words from Jim Wilder, the vehicle development manager of the 2018 Dodge Challenger SRT Demon, that echo through our head as we slide behind the wheel of the car for the first time. He was warning us about driving beyond our abilities, and keeping the car out of the wall. With 840 horsepower and 770 pound-feet of torque on tap from its supercharged, 6.7-liter V8, the Demon does 0-60 miles per hour in 2.3 seconds, and 0-30 mph in a second flat. If something does go wrong, it'll happen quickly. Following that talk, we had our guts sloshed as a passenger in a blurry eighth-mile run, giving us a taste of the G forces (the Demon can pull 1.8 G in a straight line) we'd feel when we got in the driver's seat for our own pass down the drag strip. We're already sweating. It had rained - you could describe it as torrential - the day before. The grassy parking areas surrounding Lucas Oil Raceway were still flooded, but any water on the pavement had evaporated and hung in the air. Combined with the heat, we were sticky and uncomfortable. In Drag Mode, the Dodge Demon's air conditioning turns off. Any condensation that it could leave on the track would be a problem, plus we need to reduce parasitic power losses for a faster run. The system is still working, though, the refrigerant diverted to the chiller system cooling the air coming into the engine. There's still condensation, but the Demon collects it on a catch pad to keep it from ending up on the pavement. We're also required to roll the windows up when entering the drag strip. For one thing, it helps keep the smoke out of the cabin during the pre-staging burnout. So, yeah, it's hot as Hell in the Demon. We pull through the water box and run through the sequence – which involves holding the "OK" button on the steering wheel usually used to navigate menus, and applying a specific amount of brake pressure before getting on the throttle to initiate the burnout. This gets any crud off the rear tires and heats up the rubber. There are multiple ways to launch the Demon. We had an instructor sitting in the passenger seat as we pulled up to the beams that trigger the Christmas tree at Lucas Oil Raceway. He walks us through the most complicated of the three he had explained to us just minutes before when we were in the passenger seat.

Is Mopar readying a special-edition Dart for Chicago?

Chrysler has released the above teaser of a limited-edition Mopar 2013 model that will be unveiled at next month's Chicago Auto Show. Although the automaker doesn't announce what vehicle will get the Mopar treatment, closer investigation of the seats and center console suggest that this car will be a special version of the 2013 Dodge Dart.
This will be the fourth Mopar model in as many years, following on the heels of the Mopar 2010 Challenger, Mopar 2011 Charger and the Mopar '2012 300. There are no details for the Mopar '13 Dart, but we do see that the car will retain the signature black-and-blue color scheme as past Mopar editions. Like these previous models, we expect production of Mopar '13 Dart to be limited to just 500 units.
Scroll down for Chrysler's press release teasing the new Mopar model, and we'll be sure to bring you plenty of live images from the show floor in a couple weeks.

Dodge reveals a few of the goodies in the Demon crate

One of the teaser trailers for the eagerly anticipated Dodge Challenger Demon featured a big crate full of goodies for the car. As with the car, though, Dodge was a bit coy about what was inside, simply saying there were 18 items, consisting of tools and parts. Now we know what tools the car gets, and they're some very nice Snap-On pieces. All of the tools and accessories are branded with the Demon logo. And the tools included should be perfect for easy tire changes at the track. Specifically, the tools include a hydraulic jack, cordless impact wrench with charger, torque wrench, and a tire pressure gauge. There's also a fender cover to protect the paint when working under the hood, and a nice carrying bag with the Demon emblem on the side. And, naturally, all of the tools are limited-edition units made specifically to accompany the Demon. If you want to do anything more involved than wheel swaps, you'll need to supply a few tools of your own. But this should be good for the weekend drag racer or autocross driver who wants to drive down to the course on street tires, then throw on the sticky rubber at the track. Also, as you may have noted, these tools only constitute six items in Dodge's count, leaving 12 others that must be car parts. We know that among the parts are some factory Demon wheels, and items that Dodge describes as "Direct Connection Performance Parts" and the "Demon Track Pack System." Details on these remain scarce, but they will probably be revealed closer to the car's debut date of April 11. Related Video: