2014 Dodge Durango Citadel on 2040-cars

Auto blog

Race Recap: Rolex 24 at Daytona was fast and feisty

Let the record show that victory at the 2015 Rolex 24 at Daytona went to the No. 02 Chip Ganassi Racing with Felix Sabates Target/Ford EcoBoost Riley DP driven by Verizon IndyCar drivers Scott Dixon and Tony Kanaan and NASCAR drivers Jamie McMurray and Kyle Larson. The winner did 740 laps to cover 2,634.3 miles in 24 hours and 57.667 seconds. That's a statement to this year's pace in spite of 18 cautions, two more than last year: the Michael Shank Racing Ligier got pole with a time of 1:39.194, slower than last year's pole time of 1:38.270; however, the winning car last year only did 695 laps. The fight for top honors was shaved to a four-car battle over the first third of the event. The No. 02 Ganassi car took the lead on the first lap, swapping it well into the night with the No. 01 Ganassi car, the No. 10 Wayne Taylor Racing Corvette DP, and the defending champion No. 5 Action Express Corvette DP, all of them staying within about 20 seconds of one another. The Action Express car had a fuel connector come loose and lost three laps getting towed back to the pits to have it reattached, but was back in the lead 18 hours in. The No. 01 Ganassi car dropped out with recurring clutch problems 22 hours in, retiring not long after. A race-within-the-race is where the concluding action happened, a seven minute, 30-second dash from the end of the last caution to the checkered flag. During the penultimate pit stops with an hour to go, Dixon was in second place followed Jordan Taylor in the Wayne Taylor Racing DP into the pits but beat him out, taking the lead. The Action Express car was in third. In the last pit stops of the race, Dixon gained even more time, getting a four-second advantage over Taylor. Then a full-course caution came out twenty minutes before the finish when a Prototype Challenge car hit the wall and caught fire, bunching up the field. That closed the pits, but the Wayne Taylor Racing car had to pit during that yellow because of a miscalculation of driver time. No driver can be behind the wheel for more than four hours in a six-hour period but Jordan Taylor was going to go over, so he came in to swap out for brother Ricky. That cost the team any chance of second place, since they took an additional drive-through penalty for entering closed pits. When the track went green again, Sebastien Bourdais in the Action Express car stayed all over Dixon for the final five laps but couldn't get around him.

Stellantis reveals STLA Large platform with EV and ICE support

Hot on the heels of a Jeep Wagoneer S teaser and photos of the prototype next-generation Dodge Charger (or Challenger), comes a reveal and details of what will likely underpin both of them: the STLA Large platform. It's one of multiple Stellantis flexible architectures that will be the basis of its upcoming electric cars, and apparently internal combustion ones, too. Stellantis says the STLA Large platform will be for D- and E-segment cars, crossovers and SUVs. In other words, it will be for midsize and large vehicles. For reference, lengths supported will be from 187.6 to 201.8 inches, and width will range from 74.7 to 79.9 inches. It will be highly flexible, too, with Stellantis claiming significant amounts of adjustability in overhangs, wheelbase, suspension placement and powertrain arrangement. The powertrain flexibility is quite impressive. Front-, rear- and all-wheel-drive layouts will be supported. Single- and dual-motor layouts will be on offer. Internal combustion will be available, too, either on its own or as a hybrid. Apparently engines can be fitted either longitudinally or transversely, too. Battery packs with between 85 and 118 kWh of capacity will be offered, with Stellantis claiming that sedan-style vehicles could have a range of up to 500 miles. The packs will also be available in 400- and 800-volt designs. Stellantis noted also that the platform can "easily accept future energy storage technologies when they reach production readiness." This seems to hint that the company is looking at different battery chemistries and maybe even solid-state batteries that could be added more easily in the future. Furthermore, the platform is designed to handle impressive output. Stellantis says that some models on the platform will have 0-to-62 mph times in the 2-second range. Limited-slip differentials for improved power delivery and wheel-end disconnects for reduced mechanical drag are also on the table for this platform. All of these details fit well with the information previously given for the concept Dodge Charger Daytona Banshee and Jeep Wagoneer S. The former was previewed with both battery voltage architectures and a wide range of electric powertrains with between 456 and 670 horsepower depending on specification and upgrades. And that's just for the 400-volt system; the 800-volt option wasn't detailed. We've also seen photos of the Charger chassis seemingly with provisions for gas engines, likely versions of the Hurricane I6.

Fiat Chrysler expands Takata airbag recall to 3.3M vehicles

Fiat Chrysler Automobiles is expanding its recall of vehicles equipped with Takata airbags, moving beyond Florida, Hawaii, Puerto Rico and the US Virgin Islands to the greater US, as well as Mexico, Canada and beyond. The affected vehicles, some 3.3 million in total, were built between 2004 and 2007, with many models, including the Dodge Ram 1500, 2500 and 3500, Durango and the Chrysler 300, having been affected by Chrysler's previous recall. Despite the somewhat alarming nature that comes with a recall of this many vehicles, it seems that Chrysler is moving more out of an abundance of caution (and federal pressure) than anything else, saying: "Neither FCA US, nor Takata Corporation, the supplier, has identified a defect in this population of inflators. These components also are distinct from Takata inflators cited in fatalities involving other auto makers. More than 1,000 laboratory tests have been performed on these components. All deployed as intended, but FCA US continues to study the suspect inflators, which are not used in the Company's current production vehicles." Owners of affected vehicles will be notified and asked to report to dealers for a free replacement driver's side airbag. Scroll down for the official press release from FCA. Statement: Global Air-Bag Inflator Replacement December 19, 2014 , Auburn Hills, Mich. - FCA US LLC will replace driver's-side air-bag inflators in an estimated 3.3 million older-model vehicles worldwide, in an expansion of an ongoing regional field action. Neither FCA US, nor Takata Corporation, the supplier, has identified a defect in this population of inflators. These components also are distinct from Takata inflators cited in fatalities involving other auto makers. More than 1,000 laboratory tests have been performed on these components. All deployed as intended, but FCA US continues to study the suspect inflators, which are not used in the Company's current production vehicles. Outside of Florida, one of the areas covered by the original action, no FCA US vehicle has been linked to an air-bag deployment of the type that has raised public concern. Nevertheless, the Company is replacing the Takata components tied to that concern. FCA US is aware of one related injury involving one of its vehicles, an older-model sedan. It occurred in a southern Florida region marked by persistent, high, absolute humidity – a condition believed to be a contributing factor in the air-bag deployments under investigation.