2013 Dodge Durango R/t Hemi Htd Leather Nav Rear Cam 8k Texas Direct Auto on 2040-cars

Auto blog

Lee Iacocca's very first Dodge Viper RT/10 nets $285,500 at auction

The first 1992 Dodge Viper RT/10 to roll down the assembly line, which was snapped up by Chrysler chief Lee Iacocca, yesterday hammered at the Bonhams auction in Arizona for $285,500, more than double the pre-sale estimate. According to a history of the car published by the auction house, Iacocca, in his introduction of the Viper to the press, pointed to the car on stage and said, "This one right here is mine." That historic Viper, with serial number 001, has never been available on the open market, as Iacocca kept the car from new until he passed away last year. The car has been driven just 6,200 miles and was being sold by his estate. Other Lee Iacocca cars offered at the same sale fared less well. A 1986 Chrysler LeBaron Town & Country convertible — the ultimate expression of Iacocca's company-saving K-cars — with 20,500 miles on it sold for $19,040. That's less than the $20,000 to $25,000 the auction house had estimated the car would bring. A third car from the former auto executive's estate was a customized 2009 Ford Mustang. The pony car was one of a limited run of 45 Iacocca-branded custom Mustangs, which were reworked by Metalcrafters and sold by Galpin Ford in Los Angeles. The Iacocca Mustang, never titled and with 220 miles on it, hammered for $49,280. Related Video:     Featured Gallery Lee Iacocca's 1992 Dodge Viper RT/10 View 13 Photos Celebrities Chrysler Dodge Auctions Automotive History

2020 Ford Explorer ST vs 2019 Dodge Durango SRT: How they compare on paper

For a few years now, the Dodge Durango SRT has been the sole three-row performance crossover from a non-luxury brand. That all changes now that the 2020 Ford Explorer ST is coming to market. Now we have two family crossovers with rear-drive-based platforms vying for buyers that demand practicality and power. As such, there's no better time to dig into their specs to see how they compare. We'll check out each crossover's horsepower, torque, space, capability and prices. The full specs are listed below, followed by some analysis afterward. We also compared the regular 2020 Explorer models to other crossovers in this segment, if if that's not enough, you can check out our car comparison tool. Performance The Explorer and Durango go about making power in very different ways. The Explorer goes the force-fed route with two turbos feeding a 3.0-liter V6, while the Durango's enormous 6.4-liter V8 produces power with air flow au natural. Of the two, the Durango has the greater output of 475 ponies and 470 pound-feet of torque, feeding the flames of everyone that lives by the phrase "There's no replacement for displacement." The Explorer is no slouch at 400 horsepower and 415 pound-feet of torque, though. Performance isn't purely based on power, though. Other factors play a role, such as weight, and in that regard, the Explorer is way ahead. At 4,701 pounds, it weighs a massive 809 pounds less than the portly Durango. This also means that both crossovers are very close in weight-to-power ratio, with the Explorer only slightly worse at 11.75 pounds per horsepower and the Durango at 11.6. Less weight will also play a roll in handling, and the Explorer is likely to feel sprightlier without so much mass to shift back and forth. Semi-related to handling are tire sizes. The Durango features 295-mm wide tires on 20-inch wheels. The Explorer has 255-mm wide tires on 20-inch wheels, but 21-inch wheels with 275-mm tires are available. So the Durango is working with more contact patch, but as we mentioned, it's carrying a lot more weight. 2020 Ford Explorer ST View 20 Photos Interior Space and Practicality Although the Durango SRT is the largest on the outside in every dimension, it loses out to Explorer repeatedly inside. The Ford has more headroom, leg room and shoulder room in nearly every row except the third-row where headroom comes up a bit short.

Junkyard Gem: This 1987 Dodge 600 SE Sedan is suspiciously Benz-ish

The K Platform, introduced for the 1981 model year, saved Chrysler from certain bankruptcy. By 1983, a stretched-out K chassis had been developed; the Chrysler version was the E-Class, while Dodge had the 600. These cars have become all but extinct now, so this '87 600 sedan in a Denver-area wrecking yard is a noteworthy Junkyard Gem. Ford explicitly compared the appearance of the late-1970s Granada to that of the Mercedes-Benz W123 in their advertising, and so the ground was broken for Chrysler to make the allusions to Stuttgart machinery even more obvious a few years later. The name of the Chrysler E-Class was about as subtle as a tire iron blow to the kidneys, and the badging on its Dodge 600 sibling left little to the imagination. 600s came from the factory with several variations of the Chrysler 2.2/2.5 engine, as well as the Mitsubishi "Hemi 2.6" four-cylinder. This car has the 2.5 Chrysler engine, rated at 97 horsepower. Base price was $10,553, about $23,500 in 2017 dollars (the cheapest new Mercedes-Benz E-Class cost $38,600 in 1987, so there wasn't much customer overlap between the two cars). The 600s weren't bad cars for the price, though the build quality wasn't quite up to Mercedes-Benz standards. You'll find this thumbtack treatment on most K-Car headliners that still drive today. The interior is all tan and brown, with plenty of tough industro-velour upholstery and not-so-convincing artificial wood. Aluminum-faced home audio equipment was all the rage during the 1980s, and the trend spread to automotive controls. No cassette in this car, but at least it had AM and FM radio (even plain old mono AM radios were still expensive options on many cars as late as 1987, so the standard AM/FM stereo rig in the 600 was an attractive deal). This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. You can't beat the 600!