2013 Dodge Durango Awd 4dr R/t Leather Moonroof Navigation And More on 2040-cars

Auto blog

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.

Dodge Journey to get a performance-focused replacement in 2022?

The Dodge Journey is neither fast nor agile, but it has proved a hard-to-hit target for everyone trying to figure out what the next generation will hold, including Fiat Chrysler. In 2014, the automaker's five-year plan for Dodge included an all-new Journey in 2016, and a hotted-up SRT version of the crossover come 2017. In 2016, "supplier sources" told Automotive News a new Journey on rear-drive Alfa Romeo's Giorgio platform would show for the 2019 model year, and production would be moved from Mexico to Italy, Those prognostications came to naught, the 11-year-old Journey riding on its Mitsubishi-based platform into 2020 with fewer options. Now Mopar Insiders says the next-gen Journey could come in 2022 as an early 2023 model, still on the Giorgio platform and given a performance-focused brief. According to MI, the new Journey — and it's not clear if the name will be retained — comes in strict two-row, five-seater guise. It "will be around the size of the Stelvio," the Alfa Romeo coming in at 184.5 inches. Previous reports have said the Journey will be shorter than the current 192.4-inch model, but longer than the Stelvio. The Dodge Charger is said to donate major styling cues, and there will supposedly be a Scat Pack trim. Under the hood, the entry-level engine will be the same GME 2.0-liter four-cylinder in that makes 276 horsepower and 306 pound-feet of torque in the Stelvio. MI believes a Hemi V8 will make the options list, hence the Scat Pack. Previously, other outlets have figured a turbo V6 like that in the Alfa Quadrifoglio models will stand in as the upgrade, although the model is "being developed with V8s in mind." Any engine choice is expected to be paired with an eight-speed transmission. All of those options far outdo the 2.4-liter four-cylinder with 172 hp and 165 lb-ft, shifting through a four-speed automatic, which is the only powertrain possible for the 2020 Journey. The platform switch and the change to rear-drive will greatly enhance on-road manners and performance, but MI believes an all-wheel-drive option should make the transition. If Journey production moves to Italy from Mexico, Fiat Chrysler will open up capacity in North America for big-profit crossovers and trucks, and get more from its underutilized European operations. Rumor says the Journey would roll down the same lines as the Stelvio in the Cassino Assembly Plant; the crossover is still sold in Europe and other markets as the Fiat Freemont.

2018 Dodge Challenger SRT Hellcat Widebody First Drive | Same snarl, more bite

By now, you've read a lot about the Dodge Demon, including our driving impressions from the drag strip. You've also heard a lot about the Challenger Hellcat, which we've had the pleasure of driving at Portland International Raceway, Willow Springs, and on our home turf of Woodward Avenue, both during the Dream Cruise and for an episode of AutoblogVR. Last week, Dodge and SRT invited us out to Indianapolis to sample the Demon, as well as the Durango SRT. Sandwiched between those two launches, however, was another distillation of Dodge's retro-cool coupe, the 2018 Challenger SRT Hellcat Widebody. The Widebody shares most of the guts of the standard Charger Hellcat, but went to the same cosmetic surgeon as the Demon. The Hellcat 6.2-Liter V8 with 2.4-liter-per-rev supercharger, producing 707 horsepower and 650 pound-feet of torque, is unchanged. It comes standard with a six-speed manual transmission, but our tester had the optional eight-speed automatic with steering wheel-mounted paddle shifters. It's 3.5 inches wider (look at those fenders!) than the standard Hellcat, though, which allows it to accommodate 20-by-11-inch "Devil's Rim" wheels. It shares its front splitter with the Demon, but retains the Hellcat's rear spoiler. The Widebody also features an electronic power steering system with selectable drive modes. It just slightly outperforms the standard Hellcat, as well, with better cornering grip, improved acceleration, and better braking (even though it shares the same Brembo brake package as the standard Hellcat). Dodge claims that the Widebody does the quarter-mile 0.3 seconds quicker, dropping it just out of the 11s to 10.9 seconds. 0-60 miles per hour drops from 3.5 to 3.4 seconds. Lateral grip increases by 0.04 G to 0.97 G on the skid pad. On the company's 1.7-mile road course, Dodge says the Widebody drops two seconds off its lap time compared to the standard Hellcat, finishing about 13 car lengths ahead. We spent our time with the Hellcat Widebody on the infield road course at Indianapolis Motor Speedway. Sliding into the car, the seating position is cozy and comfortable even with a helmet on, and we have no trouble adjusting our chair and steering column to ideal placement. The infotainment display shows us our drive settings for the next few miles: the transmission and suspension are in Track Mode, steering is set to Sport, with traction set to Street. We fire up the car with an instructor in the right seat, and head out of the pit lane.