2003 Dodge Durango Slt on 2040-cars

Auto blog

Inner Demon revealed: 840 hp and other jaw-dropping details

After months of teasers, rumors, cryptic messages, and veiled hints, the 2018 Dodge Challenger SRT Demon is finally here, and it's as wonderfully insane as we hoped it would be. Finally we know the facts and figures that Dodge has been hinting at for so long. 840 horsepower. 770 lb-ft of torque. 2.3 seconds to 60 mph. A quarter-mile run of 9.65 @ 140 mph. While pricing hasn't been announced, Dodge is trying to keep it under $100,000. That horsepower figure makes this the most powerful production V8 ever. With those 0-60 and quarter-mile times, it's also NHRA certified as the quickest production car ever. Someone with the means needs to line a Demon up against a Tesla Model S P100D. All that power and all of the Demon's trick launching software and hardware will throw a driver back against their seat with 1.8 Gs. Drivers will be seeing a bit of sky, as the Demon is the first production car to pull a wheelie from a dead stop. Yes, this is all totally and 100 percent street legal. View 48 Photos In order to make all this power, the red-painted supercharged 6.2-liter Hemi V8 has been significantly improved over the Hellcat. It's equipped with a larger 2.7-liter supercharger that turns the boost up to 14.5 psi, redlines at 6,500, and has what Dodge is calling SRT Power Chiller, a system that uses the air conditioning to cool the air coming in through the new Air Grabber hood scoop. In order to keep your engine running time and time again, there is an after-run cooler than cools the supercharger after the car is shut off. The pistons and connecting rods have been strengthened to deal with the higher load. In order to feed enough juice into the engine, the Demon uses dual fuel pumps. We assume that a decent EPA rating wasn't on the top of the engineer's list. Oh, and the Demon can run on 100-octane with the press of a button. With the traditional SRT black and red keys, the Demon actually has three horsepower ratings: 500 with the black key, 808 with the red key, and the full 840 with the red key and 100-octane fuel. Don't worry, even if you have the black key, the Demon will drop the 1/4 mile in 11.59 seconds, still quicker than almost anything around. Most of the rest you already know from the seemingly endless teasers. The Demon wears lightweight wheels with sticky 315/40R18 Nitto drag radials at all four corners.

Inline-6 Hemi replacement on the cusp of production from Stellantis

It appears that Stellantis is ready to put its long-rumored inline-six into production at its Saltillo, Mexico plant, possibly marking the beginning of the end of Chrysler's long-running 5.7L Hemi V8. But so far, the automaker's American brands have remained mum on where exactly the new turbocharged "Tornado" I6 may land. Stellantis powertrain blog Stellpower (by way of Muscle Cars & Trucks) spotted an entry for a new "GME T6" inline-six engine on the Saltillo facility's web site, suggesting that it was either in production or close to it. That entry has since been removed, but the mystery remains.  We've been hearing tidbits here and there about this new inline engine for years, but this is the first time we've seen anything suggesting its arrival is imminent. Usually, such a significant powertrain update would coincide with the launch of a new product to showcase it. So far, Stellantis has remained mum, even overseas, about where this engine is destined to reside. 2022 model year vehicles are likely off the table entirely.  But while it's common for new engines to debut with new cars and trucks, it's not a universal truth. Ford's Coyote V8 missed the corresponding Mustang refresh by a year, for example, orphaning the 2010 model and its much-needed styling updates with the old 4.6L V8 (and the 3.8L V6, for that matter; the 3.7L Duratec was also late to that party). Even sticking just to Stellantis, the JL Wrangler's powertrains have been a work in progress since it arrived back in 2018. The standard V6 and 2.0-liter turbo-4 debuted at launch; the EcoDiesel, 392 and 4xe all came later.  And 4xe may be the model by which to measure our expectations. Its introduction didn't come completely out of nowhere, but it was rather sudden for what turned out to be such a solid offering. That bodes well for the company's existing Hemi-powered trucks and SUVs. The Ram 1500, Jeep Grand Cherokee and Wagoneer are all strong candidates to receive the new Hemi replacement, as all would greatly benefit from even small improvements in fuel economy. If there's to be a future for the Dodge Charger and Challenger and Chrysler 300, they'd benefit too. And how about a Gladiator with the wick turned up, positioned as its equivalent to the Wrangler 392. Turn that Tornado into a Dust Devil. Don't worry; we've got plenty more where that came from.  Related Video This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

2019 Dodge Charger SRT Hellcat gets some Demon goodies

The 2019 Dodge Charger SRT Hellcat has been revealed, along with details on the rest of the range. Though the new Charger doesn't look a whole lot different, there are a number of special upgrades, especially for the Hellcat. The least interesting changes are on the outside. The Hellcat and the R/T Scat Pack get a new grille with twin air intakes next to the headlights. The regular RT and GT get some sportier additions such as a hood scoop, rear spoiler, and some other revised body work. The Hellcat also now gets a matte black hood option, as seen on the gray car above. Under the skin are more interesting upgrades. The Hellcat raids the Demon parts bin for its "After-Run Chiller" that continues providing cooling to the intercooler after the engine has been shut off. This way you'll still get cool air for another run when you come back and fire it back up. The Charger Hellcat also gets the Demon's fancy "Torque Reserve" system to start generating boost right at launch. Both the Hellcat and the R/T Scat Pack also come with line lock for big smoky burnouts and "Launch Assist" for minimizing wheel hop and maximizing grip. Both cars have the same power and torque as last year's iterations, though. Dodge hasn't left out its lower-rung Charger models, either. The R/T now gets standard performance suspension and shift paddles, along with a 2.62 rear axle. The GT model is now available in rear-wheel drive, and it's being marketed as more of a performance-oriented trim for the V6. As such, it also gets the performance suspension as standard, a 3.07 rear end and shift paddles. The SXT rounds out the base of the lineup and now has an all-wheel-drive option. Output remains the same with these vehicles, and the GT continues to make 300 horsepower and 264 pound-feet of torque while the SXT makes 292 horsepower and 260 pound-feet. 2019 Dodge Chargers will start showing up on dealer lots in the third quarter of this year. If you're really eager to get one, dealers will be able to start ordering them by the end of June. Pricing hasn't been announced yet for the big sedan. Related Video: