2002 Dodge Durango Slt Plus Sport Utility 4-door 5.9l on 2040-cars

Auto blog

Mopar '13 Dart is a bruiser of a compact

For the fourth year in a row, Mopar is offering a limited-production car decked with a plenty of add-ons and a unique look. This year's black-and-blue car is the Mopar '13 Dart, which was unveiled at the Chicago Auto Show with the now-signature paint scheme. Like previous Mopar models, only 500 of the '13 Darts will be built. Past models include the Mopar '10 Challenger, Mopar '11 Charger and the Mopar '12 300.
The all-black Dart gets a brightly contrasting, offset blue stripe running the full length of the car, and other styling mods like the aero-tuned body kit, gloss black grille, wheels and mirror caps. Curiously, Mopar chose to stick with the Dart's standard headlights rather than the darker, smoked lights. The interior gets a similar black-and-blue treatment, but this unique cabin features a blue leather driver's seat to go along with the black leather seating for the rest of the passengers.
More than just a styling package, the Mopar '13 Dart also gets some performance and handling goodies to complement the Dart's turbocharged 1.4-liter engine, such as upgraded brakes with slotted rotors, a lowered suspension, retuned electric power steering and a "sport-tuned" exhaust system.

500+ hp Stellantis 'Hurricane' I6 previews a world without Hemis

After years of rumored development, Stellantis has revealed its new six-cylinder engine family. The 3.0-liter, twin-turbocharged "Hurricane" I6 will offer V8 power, forced induction torque and six-cylinder efficiency in a package designed to fit into any of the company's North American rear-wheel-drive platforms.  What is "V8 power," exactly? Well, in standard output guise, the new I6 cranks out more than 400 horsepower (the specific figure will vary by application) and 450 pound-feet of torque, while the high-output variant is good for more than 500 horses and 475 lb-ft. The final figures will be dependent on the application. We'll save you a little legwork: In current Ram, Jeep and Dodge products, the 5.7-liter Hemi tops out at about 395 hp and 410 lb-ft, give or take, and the 6.4-liter around 485 hp and 475 lb-ft.    This is a clean-sheet design that is only related to the company's turbocharged four-cylinder by some common measurements. The I6 is exclusively direct-injection (no hybrid/port-injection here) and the two I6 variants share 96 common parts, including the block and oil pan design. The differences are found in their internals, intake plumbing, valvetrain components and the turbochargers themselves. Stellantis is not yet ready to share specs or supplier info for the turbos but says announcements will come from its partners soon.  The standard-output I6 has a compression ratio of 10.4:1 and revs to 5,800 rpm. It will run on regular fuel, albeit with reduced performance; 91 octane is recommended for maximum output. The high-output variant has a compression ratio of 9.4:1 and will rev to 6,100 rpm. That one will require premium. The new I6's advantages go beyond basic power output. Every Hemi family engine currently in production is based on an iron block design, so they're heavy. The aluminum-block I6 shaves weight off the total engine package, even if some of that gets added back thanks to the turbos and their associated plumbing. The standard-output I6 weighs 430 pounds, Stellantis engineers told us; the high-output adds just another 11. Fully dressed 5.7-liter V8s are in the 550-560-pound ballpark, and 6.4-liters close in on 600 pounds.  You may be wondering, "Why a clean-sheet gasoline engine now, when the industry is moving toward battery-electrics?" A valid inquiry, and one Stellantis was prepared to address. While the company will be pivoting to electrification over the next decade, it won't be instantaneous.

Dodge performance could be electrified, new hybrid transmissions coming

Dodge is arguably the last company around specializing in old-school muscle cars. Outside of a few models like the Chrysler Pacifica Hybrid and the new e-Torque offerings in the Ram 1500 and Jeep Wrangler, FCA as a whole seems behind the ball when it comes to green or electrified powertrains. That might change over the next few years, as Tim Kuniskis, head of passenger cars at FCA, told Automotive News that he sees the future of performance to be electrified.  At the reveal of the Dodge Charger Hellcat Widebody a few weeks back, Kuniskis said "the absolute future is electrification of these cars." What form this takes or how soon this all might happen is unclear, but changes are likely coming. Kuniskis said the electrified models could be anything from pure battery-electric vehicles to plug-in hybrids to e-axles. FCA’s e-torque system already works with the companyÂ’s Hemi V8 in the Ram 1500, so, if thereÂ’s room in the engine bay, we imagine it would be pretty easy to adapt the mild-hybrid system for other V8-powered vehicles.  One thing to note is that FCA just inked a new deal with ZF. The latter will supply a new 8-speed automatic transmission for longitudinal front-engine cars that will work with both rear and all-wheel drive vehicles. FCA already uses a version of the ZF 8HP automatic, but the big thing to note is that the new transmission has a small electric drive unit built in. If this new transmission is as ubiquitous as the current one, you might find electrified versions of Alfa Romeo and Maserati products as well as those from Dodge, Jeep and Ram. This seems in line with what was announced in last yearÂ’s five-year plan.