2000 Dodge Durango Slt Sport Utility 4-door 5.9l on 2040-cars

Auto blog

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.

Work at a Chrysler dealership, get free college education

The cost of a college education in the US can put a student tens (hundreds, in some cases) of thousands of dollars into debt. FCA US wants to give its dealership employees a leg up, though, and the automaker is now offering a completely free education to them through a partnership with Strayer University. The workers can take any of the college's classes online or on campus through program called Degrees@Work. Currently, the offer is only available to employees Chrysler, Jeep, Dodge, Ram and Fiat dealers in the automaker's Southeast region, which includes Florida, Georgia, South Carolina, North Carolina, Alabama and Tennessee. However, a national expansion will happen before the end of the year, Strayer spokesperson Cristina Henley tells Autoblog. The program will cover all of the students' expenses, including their books, according to Henley. FCA US sees this partnership as a way to improve the talent of its workforce, retain employees longer and possibly attract people wanting to take advantage of this free education. "Many of our dealers have expressed concern over the availability of talent to fill open positions due to business growth and turnover in their stores, especially in metro markets," Al Gardner, the company's Head of Dealer Network Development, said in the Degrees@Work announcement. Strayer has about 40 programs available, including in business administration, accounting, marketing, and more, and the university offers associate's, bachelor's, and master's degrees. It will also give FCA US employees credit for their work experience to get them a diploma even more quickly. FCA US Dealers to Offer Employees No-Cost, No-Debt College Education FCA US teams with Strayer University to develop first-of-its-kind dealer program Degrees@Work program open to all employees of participating dealerships Employees can earn no-cost, no-debt degree through Strayer University All Chrysler, Jeep®, Dodge, Ram and FIAT dealerships may participate First phase of program rollout begins with dealers in the FCA US Southeast Business Center National rollout expected later this year May 4, 2015 , Auburn Hills, Mich. - Employees of Chrysler, Jeep®, Dodge, Ram and FIAT dealerships will have the unique opportunity to earn a no-cost, no-debt college degree through Strayer University's Degrees@Work program, developed in collaboration with FCA US LLC. FCA US is the only company in the automotive industry to offer the program.

Hennessey Dodge Demon sets hellishly fast quarter-mile time

The Dodge Demon doesn't strike us as a muscle car much in need of a performance makeover. After all, this 840-horsepower MoPar machine's voracious quest for straight-line speed means it trims weight by jettisoning everything from a front passenger seat and rear seat, to its stereo and all carpeting in the trunk. The folks at Hennessey apparently think that's not nearly extreme enough. So, the Texas-based tuning outfit has turned the Demon into a 1,035-horsepower mega beast that runs a quarter-mile in 9.14 seconds at 152 mph. That's fast, really fast. In fact, the HPE1000 is now the world's fastest Dodge Demon, having set its record-setting pace at Lonestar Motorsports Park on May 8. "The 2018 Demon is a street-legal rocket from Dodge, but we wanted to take the car's impressive track times to an industry leading level." said president and company founder, John Hennessey. For comparison, the stock Dodge Demon is credited with running the quarter-mile in 9.65 seconds at 140 mph. The main HPE1000 modification involves replacing the stock 2.7-liter supercharger with one that's a staggering 4.5-liters in capacity. Also included in the Hennessey toy-chest are stainless steel long tube headers, a high-flow air induction system, upgraded throttle body, upgraded fuel pump and fuel injectors, along with custom engine management calibration. When all is said and done, the HPE1000 Dodge Demon delivers a total of 1,035 horsepower at 6,500 rpm and 948 pound-feet of torque at 4,200 rpm. While the standard Demon accelerates from 0-60 mph in only 2.3 seconds, the Hennessey variant trims this down to only 1.9 seconds. That's quick enough to make a Bugatti Chiron blush. Hennessey hasn't stated what all this will cost, though the company did say production of these devilishly fast Demons will be limited to only 50 examples. Customers also receive a 1-year/12,000-mile warranty, which seems a nice touch for a car that's downright scary with its performance specs. Related Video: Featured Gallery Dodge Demon Hennessey HPE1000 View 30 Photos Aftermarket Dodge Coupe Performance supercharger Hennessey dodge demon quarter mile demon